Grinding the log house

After the construction of the log house, an equally important process follows - its grinding. Technologically correctly performed grinding of a log house, is able to significantly extend its life. In addition, a qualitatively polished log house - has a very attractive appearance. We will consider how to grind a log house later.

The need for grinding logs: the benefits of grinding

Most experts argue that grinding of a log house should be carried out after at least a year after its manufacture. Since during this time the wood acquires natural moisture and defends, getting used to the natural external environment.

However, this statement is not correct, since painting a log house without grinding is unacceptable, and a log house, unprotected from external factors, will lose its attractiveness throughout the year.

Therefore, it is recommended that, immediately after the construction of the log house, to grind it, open it with varnish or paint. If you paint the log house, without making it grinding, then the tree cracked.

Therefore, proceed with grinding should be immediately after the construction of the log house. Among the advantages of grinding should be noted:

The log house, poses with the influence of ultraviolet radiation, becomes yellowish, grinding can improve the attractiveness of the appearance of the structure and returns the natural texture and color of the tree;
If you do not grind the log house with a pitch with the help of impregnations, then they will not be absorbed evenly and the effect, protection against moisture and the sun will not be achieved at the proper level;
Grinding helps to remove mold and fungus from the surface of the tree;
In addition, grinding allows you to get rid of dirt and irregularities present on the walls, the final result of the work will significantly improve the attractiveness of the appearance of the log house.

Choosing a tool for grinding a log house

To grind the log house, a tool is used in the form:

1. Grinding machine - most often used by companies specializing in wood grinding, but if the work is performed not by a professional, then other equipment is used. Buying this tool for grinding one log house is irrelevant due to its high cost.

2. Ribbon grinding machine - there are several options for this device:

equipped using additional nozzles;
A device with a collection for dust.

A grinding machine equipped with a flat beam is convenient to use. The price of such devices is much lower than for machines, their cost depends on the power, performance and the manufacturer.

3. Bulgarians that have disk nozzles. This tool is very convenient to process corner and log areas. If you have a grinder, then it is enough to purchase a special disk nozzle for it.

To independently perform the grinding of a log house, the presence of a grinder or electric drill is required. These tools are available to everyone who independently made a house from a bar.

When performing grinding work, do not forget about safety measures that require the mandatory use of a respirator and mask, since small particles of wood dust are able to get into the eyes or nose and cause irritation.

The quality of the grinding depends on the type of tool that it is carried out on the stiffness of the nozzle, which is used. If it is planned to make grinding of a log house outside, then it is necessary to use circles of the eighty or one hundred and twentieth section. The first option will allow you to grind in gross areas, and the second - levele the log house for performing its staining.

To clean the surface of the old paintwork, it is recommended to use grinding nozzles with granularity of thirty and sixty units. The main requirements for the tool with which work is performed is lightness and performance. If the weight of the device is large enough, then the capacity of the operation is reduced.

Recommendations for grinding walls

Before starting work, the preparation of walls for grinding should be carried out. To begin with, inspect the walls for the presence of radical structures, that is, exfolved areas. They are able to lead to damage to the tool. To process these sites, use the adhesive composition, then the walls must dry for at least 24 hours.

This method is used in the manufacture of log house both from logs that have natural humidity and from logs dried in the chamber. You should start grinding with large nozzles, and finished - small.

Do not leave the walls after grinding, it is recommended to immediately cover them using special compositions. In the process of performing work, pay attention to the grinding of ends and corner areas.

Since after completing the construction of a log house, the ends are the most vulnerable areas for the development of mold and fungus. Therefore, their processing should be paid to special attention.

In the process of staining the ends, they absorb five times more paint or varnish than ordinary walls. In order to save the ends, they used to use a soldering lamp or hammer. With the help of firing, it is really possible to increase the duration of wood operation by several years. However, after that, the attractiveness of the beam is significantly reduced, as it changes color.

With the help of a hammer, the end areas are tapped, this is done in order to fully connect the fibers, and block the channels. The surface at the same time acquires smoothness and at the same time hardness.

With the help of modern grinding materials, it is possible to make the ends smooth without changing their color and appearance. To grind the ends, it is recommended to start working with a nozzle at a number thirty -five, and to complete - a one hundred and twenty nozzles.

If the grinding technology is in full, then cracks will not appear on the ends over time. The option of their further treatment with liquid glass is possible.

After the grinding, take care of cleaning all the dust, as it is able to clog the channels back. For these purposes, use a vacuum cleaner or brush that has a long pile.

Grinding log cabins photo:

In order to polish the corners of the log house, it is recommended to use the same grinding nozzles, but previously slightly improved. The rubber area of \u200b\u200bthe nozzle is cut into 60-70 mm, so there are no problems with the processing of hard-to-reach places.

The technology of grinding logging

Carrying out grinding work on a log house made of galinded logs, you should be extremely careful and observe all technological features for the implementation of this process. There are two logs of logs of logs:

whole;
partial.

The choice of one or another option directly depends on the quality of the beam. Escalled logs undergo antiseptic treatment and moisture -repellent impregnations even before they are purchased, therefore, in the process of grinding, this layer is removed. After grinding, such a beam should be immediately covered with antiseptic compositions again.

Galled logs are polished dry, that is, after a certain time after building a house, at least a year. Before grinding, the hemp should be checked, if the slots are present on the logs, they should be closed.

Keep in mind that the hemp is carried out before grinding, then, after it, the surface acquired ideal evenness. For processing logs, it is not recommended to use gross nozzles. It is best to use a grinder when performing work, since it is very difficult to work with grinding equipment in the form of a machine or machine on a semicircular surface.

At the initial stage, it is recommended to grind the logs with a nozzle at a service station in order to raise the pile. Next, the log house is polished by a nozzle under the number one hundred and twenty -five. Thus, the surface is aligned. Grinding angles and end areas is carried out manually.

The qualitatively performed grinding allows you to get a perfectly leveled and smooth surface as a result.

In order to make grinding efficiently, we propose to consider a list of common errors made during this process:

Do not turn on the tool at high speeds, since there is a risk of surface damage, the formation of irregularities and grooves on it;
Before the grinding of a beam made of coniferous wood, it is recommended to remove the resin from the surface, otherwise, the resin will be smeared on the surface and will remain on it;
If you do not use glue to restore the defects of the beam, then its surface after grinding will not be perfectly smooth;
after the surface is covered with paint or varnish, villi rises on it, so after applying the first layer of paint and varnishes, it is recommended to again sanding the surface with fine -grained nozzles;
Grinding is performed before the installation of windows, doors and before finishing the entire room, so wood dust will not accumulate in their pores.

Tip: Try to grind immediately or in the process of manufacturing a log house, thus, the quality and duration of wood operation will remain at the proper level.

Features of the grinding of a sandbug of sandblasting

The new and quite popular method is abrasionly jet grinding of a log house. Among the advantages of this technology, it should be noted:

contactless grinding;
speed of work;
obtaining a perfectly flat and smooth surface;
lack of all sorts of pits and ribs;
The seal compaction, due to this, increases the life of the tree;
obtaining the effect of beautiful wood texture;
Due to the presence of a dense surface, it is possible to significantly reduce the consumption of paint and varnish for processing the log house;
The ease of work in hard -to -reach areas.

However, to purchase this equipment, you should be very much to spend money. In addition, to make grinding, you need to have experience in this area. If you plan to use this method, it is best to hire a specialized team that will perform all the work efficiently and quickly.

Grinding the log house with your own hands

In order to grind the log house inside, use the recommendations:

1. If the size of the wall is large enough, then we recommend that you divide it into several parts. Keep in mind that it is recommended to grind at least one wall in one day, since after the process of this process, it should be immediately painted. If this is not done, then grind this site again.

2. To remove a coarse top layer, abrasive paper with a low fraction should be used. After the pile rises, to remove it, use the paper with a fraction of at least 100 units.

3. If work on the independent grinding of the log house is carried out for the first time, then it is not recommended to use a grinder, since, choosing too much speed, there is a risk of damage to the tree.

4. Before grinding the grooves with the help of an angular grinding machine, a special nozzle of a flat shape is not installed. When performing this process, rubber nozzles should not be used.

Work with a log house after its grinding

After the grinding is performed, the log house must be treated with special compounds. There is a huge selection of these compositions of both foreign and domestic origin.

Without fail, log house, after grinding is covered:

antiseptic drugs that prevent the formation on their surface of mold and fungus;
cerebral substances, they improve the attractiveness of the appearance of the walls;
Anti -rope - drugs that make a wooden surface of non -conjugated.

The processing of the log house is performed in order to protect it from moisture, mold and various kinds of microorganisms. In addition, its further processing is performed with a paint with a matting or glossy effect or varnish, which allows you to preserve the natural pattern of a tree.

First, the log house is covered with an antiseptic, it disinfects the tree and kills mold and fungus, if any. Further, the wood is whitened and covered with fireproof impregnation.

For painting a log house use a brush or a spray gun, if a log house is painted. Before applying the paint, check the surface for evenness, if the wood is present on the tree, then use special sealants to close them.

In order to process the end areas, it is recommended to use acrylic compositions or liquid glass. Wall processing is performed exclusively at a plus air temperature.

Choose high -quality compositions from proven and well -proven manufacturers. Savings on the compositions will lead to premature spoilage of the tree and to a decrease in its quality during the operation of the log house.

Grinding the log house video:

Site search

Table of contents: