How does laying of linoleum on a wooden floor begin?

That linoleum laying on a wooden floor It is quite simple, but at the same time the responsible process, everyone knows. But before starting work, you need to inquire which requirements follow from manufacturers so that the result is of high quality.

Firstly, linoleum laying on a wooden floor should be performed at an air temperature in a room of at least +18 degrees, while humidity should be 50 percent. Material mounting should begin with the preparation of the base. It must be washed thoroughly and treated with a vacuum cleaner, remove all dust and dirt. Otherwise, irregularities and bloating may appear due to garbage. In addition, it is necessary to immediately measure the surface using the level to determine whether there is a slope, other defects. Since the material can shift in one of the sides during styling. If there are still deviations, you need to urgently remove the floor from wood and change the screed.

Before proceeding with direct mounting of linoleum, the material should lie down for some time in the room at room temperature. It is worth noting that all linoleum sheets must be perfectly even. To do this, it must first be unwound and left in this position for two days.

If the wooden floor was laid in the house several decades ago, then it is worth showing some caution. So, at the beginning, the boards are checked for rot. The rotten elements are replaced by new ones, which are covered with antiseptic matter from above. This will increase the strength of the base and protects from the influence of microorganisms. Linoleum laid on top will increase sound and thermal insulation.