Install plastic windows with our own hands. Rolled curtains on plastic windows without drilling: installation, features of choice

Plastic windows today have become an integral attribute of comfort and comfort in the house. It is difficult to argue about their energy efficiency and high -quality sound insulation. So that the installation of not at all cheap metal -plastic windows does not turn into an empty waste of money, and all its positive aspects have not come to naught, it is worth adhering to all the necessary nuances. Installation of a plastic window in a specialized company costs quite a few, but there is a way to save well at this stage of repair, and install it with your own hands. The tips for the installation of plastic windows given in this article will help to fulfill it correctly. But it is not enough to put a good energy -saving window. To create comfort in the dwelling, this window should be decorated. Next, the reader will find instructions that will help to install roller curtains without drilling. This method is suitable for rooms decorated in any design styles. Using roller curtains in the apartment, you can create the necessary atmosphere. This is a simple and inexpensive way to bring comfort to a modern house. Now about everything in order. Let's start with the installation of a plastic window with our own hands.

Table of contents:

1. Preparation and conduct of the necessary measurements
2. Order of a plastic window
3. Dismantling of the old window block
4. Stage installation of a plastic window
5. Decorating a new window opening
6. Phased description of the installation of a roll curtain without drilling
7. Summing up

Preparation and conduct of the necessary measurements

Before taking out the old window, you need to measure the opening and order a metal -plastic window in a specialized company. Its manufacture will take some time.

To measure the window opening is necessary from both the external and from the inside. A conventional construction roulette is used for this. It is also worth freezing the opening with an oil level or plumb line in order to take into account the possible skewing of the building, because it may not be noticeable by eye. The size of the window frame should exceed the maximum opening size by a length of 3 4 cm, and in height by 1 2 cm. So, the window will not fall out when installing. The dimensions of the window sill and tide must be measured right there.

Important! When measuring the external opening, take into account the presence of plaster on the slopes, measure the distance directly from and to brick (cinder block, etc.)

Measurements should be made as clearly as possible, since the width and height of the openings are often purely individual. In the event that the measurements taken by the master of the manufacturer are made with an error, it is impossible to return the cost of the window. Therefore, if it is not possible to correctly perform this stage of work independently, it is better to use the services of a specialist.

Order of a plastic window

When choosing a manufacturer, focus on the reviews and life of the company in the market of metal-plastic windows. A well -established manufacturer will ensure the installation of a quality profile that will not lose in operational qualities over time.

It is important, before ordering in details, calculate the elements of the future window: accessories, fasteners, the size of the opening and deaf part, a mosquito net and other details.

Do not save on the installation of deaf windows and large deaf openings, since in operation they will bring a lot of inconvenience.

Dismantling of the old window block

When starting to independently carry out the dismantling and installation of windows, make sure that the farm has all the necessary tools. At least this work does not require special skills, it is not worth neglecting trifles. Negligence in this matter can lead to undesirable consequences: cold in the house, fogging the windows, deformation of the frame, jamming of the sash and other troubles.

To dismantle the old wooden window, you will need a grinder or a saw, a hammer, a screwdriver, a chisel, a mount, a knife. Before removing the window frame, it is necessary to remove the sash and remove the windowsill. After that, the window frame is cut and broken out.

After all the elements of the old window block and part of the plaster on the slopes are removed from the opening, it is necessary to clean all the surfaces and fill large slots and potholes with a solution. If you leave such places without adjustment, the window may skew over time, there will be noise or cold bridges will appear. Hence the discomfort in the room and the damaged interior decoration.

Stage installation of a plastic window

Next, the instructions are proposed for which the plastic window is installed with your own hands.

1. Dismantling the structure

The plastic window is installed disassembled. For this, double -glazed windows are removed, you can also remove the sashs to relieve the design.

• To take out the double -glazed windows, a glazing window is pulled by a screwdriver or a solid spatula. Several light blows will lead him out of the groove. First of all, it is better to remove vertical and then horizontal elements. It is advisable to numb them so as not to confuse them during assembly. The window is assembled after installation in the reverse order. Lastly, long vertical stacks are inserted. It is better to score them with a rubber hammer to avoid damage to the double -glazed window.
• If you need to remove the sash, the first thing is to take out the stem from the upper loop in a ajar position. Tilt the sash on themselves, remove it from the lower loop.

2. Installation of the window block

Before installation, a standing profile is inserted into the lower groove of the window. It serves as a support for the entire structure. The frame is trying on the opening, the wedges are inserted under the profile (at least three).

Important! Before installing the window block, it is recommended to remove the protective film from the outside, because later it will be extremely problematic to remove it.

It is best to use anchor plates for attaching a plastic window. They are located at a distance of 10 20 cm from the corners on all sides of the frame. The plate is attached to the window with the help of metal screws with a size of 10 mm. To the wall with dowels. This method is preferable to use non -professionals, since it remains the opportunity to fix the possible errors before dumping, without drilling extra holes in the window profile.

You can use anchor mounts on plastic windows. It is quite simple to conduct this procedure with your own hands. On the inside of the frame without a double -glazed window, a hole for an anchor is made a hole. On the slope there is a place in which it will be attached. You can make both holes at once, if the conditions allow it. Previously, the window block is aligned in three planes using a building level. The dowels are not clogged into the wall to the end, so as not to break the structure.

It is easier to align together together. When one person holds the frame adjusted to the level, and the second burns the wedges in the right places.

After aligning and fastening the window block at all points, as well as the installation of the tide, the gaps between the frame and the wall are displeased. If the distance exceeds 2 cm, it is better to fill it with foam in two approaches with a break of 2 hours. If the distance is even larger (up to 6 cm), the excess space can be filled using pieces of polystyrene or brick. Under the tide, the blowing of the foam is recommended to reduce noise from precipitation.

Important! Before the foam will be blown, the adjacent surfaces should be moistened by sprinkling them with water from the spray gun.

Next, it is necessary to quickly put the double -glazed windows in place, having previously placed the leveling substrate under them, and close the wings. This must be done in order to expand, the foam does not dig the window frame.

3. Installation of the window sill

After the foam is hardened, its excess is cut off with a knife. The window sill carved in size is inserted under the window profile, it should fit very tightly. To achieve this under the windowsill, you should put the wedges. In order to avoid blowing, its edge must be treated with sealant. Then the foam is blown again, and in order to avoid swelling, the windowsill is crushed by heavy objects (for example, banks with water or bricks).

It is permissible to install all the structural parts of the window block at the same time (frame, window sill, tide), but when doing this work with your own hands for the first time, it is better to do everything in stages, with small breaks for foam hardening.

Want to see all the above about how plastic windows are installed? The video below will reveal each stage of installation more clearly.

Decorating a new window opening

Having installed a brand new plastic window, mounting the slopes and carrying out the rest of the planned repair work, you need to think about the decor.

The curtains on the windows not only protect our personal home space from prying views, protect furniture from burnout, but also allow you to create coziness and the desired level of intimacy, due to the overlap of sunlight. The curtains also serve as an integral element of the interior, which has a place in any design idea.

Further in the article we will consider:

• what are cassette curtains on plastic windows;
• what are their types;
• how to install roller curtains with your own hands on metal -plastic windows (without drilling profile).

1. What is a roller curtain?

A successful unification of the classic fabric curtain with practical and convenient shutters led to the emergence of a new rather promising type of curtain of the roller curtain. This is essentially a fabric canvas, which tightly blocks the surface of the window and, if necessary, turns into a roll. The fabric roof can be attached both on the wall near the window opening, and directly on the window itself.

There are not many varieties of structures for plastic windows. Rolled curtains depending on the type of roll:

• with an open shaft (mini);
• with a closed shaft in a plastic body Il aluminum (cassette curtains for plastic windows).

Depending on the shape of the staff, cassette curtains are divided into:

• The unity 1 guides are attached to the inside of the headaces, and the canvas the curtains moves close to the window of the window;
• The university of the guide is fixed on the outer side of the graduate, the light in this case is not blocked so high quality.

Rolled curtains with an open shaft may not have guides and sag free under the weight of the lower bar. It is recommended to make them slightly wider than the glass or the entire window opening, since a rather large gap remains between the canvas and the opening.

2. Measurements for rolled curtains

How to make measurements for rolled curtains? To do this, firstly, it is necessary to determine their type.

• for a simpler species of roller curtains such as mini, we measure the width of the glass along with the stacks and the height of the window sash;
• for a cassette curtain of the university type 1, we measure very accurately the distance from one graduate to another in both directions;
• for the type of cassette curtains of the URO 2, you should measure the distance on the outer sides of the graduates along with the glass in both directions.

3. What is the process of installing roller curtains?

Installation of roller curtains on plastic windows can be carried out in several ways:

• attaching with self -tapping screws;
• having fixed on the brackets on the opening wings;
• installation without drilling, using bilateral tape.

Consider the simplest, most sparing for expensive metal -plastic windows, the method of installing roller curtains without drilling. Such installation is carried out the same with the difference only for the opening and deaf parts of the window. For the sample of windows and balcony doors, brackets in the form of the letter G are used, which are put on top of the sash and tightly fixed to click. The bracket is connected to the holder of the roller curtain using the same double -sided tape.

Phased description of the installation of a roll curtain without drilling

1. We remove the factory packaging and remove the semicircular holders from the ends of the roof.

2. We put on holders with glued brackets on the curtain and apply to the window sash in order to mark the place of the future mount.

3. Again, remove the brackets with holders, peel off the protective tape from the tape on the bracket.

4. We dress in the marked place on the window sash. We snap and at the same time press the tape to the window.

5. One of the holders is attached to the twisting mechanism with a chain, and then the shaft of the curtains is inserted into it.

6. With some effort, the other side of the shaft is inserted into another holder.

7. Check the performance of the design.

If everything is done correctly, the roll curtain will move smoothly and exactly along the window.

The method of installation of the roll curtain on the blank part of the window is absolutely identical, we only miss the mounting point of the bracket.

If cassette cassette curtains with guides are used, then after the same installation process (as described above) along the graduate (on its outer or on its inner side), guides are glued. In them, the canvas will move along the window glass.

Summing up

Comfort and comfort in the house are provided by not separate objects, but their composition, ratio. The windows and curtains that will be used in the interior will provide at least 40% of the total design impression. Therefore, their choice and installation should be paid to the maximum possible attention. Rolled or cassette curtains on plastic windows look modern, perfectly perform the technical purpose of curtains, are used in various textures and combinations, and also applicable in any, even the most classic interiors.