Aluminum glazing: photo, installation instructions

Any design of the building should effectively perform the main functions, including protection against external influences. Many pay attention to the beautiful appearance of the mirror facades of office and shopping centers, but exactly the same aluminum glazing is used for loggias and balconies. Many people know how inconvenient many designs of old houses with a typical layout with balconies, where snow and rain freely falls, the winds and drafts reign. Therefore, the sooner the desire to make high -quality glazing comes, the more comfortable the external part of the apartment or the open veranda in the house will be.

Table of contents:

1. What is important to know about glazing aluminum profile?
2. Varieties of glazing the balcony with aluminum profile
3. Choose windows of swing or sliding
4. Stained glazing facade in a private house
5. The choice in favor of glazing aluminum profile
6. Is it possible to glaze a balcony with an aluminum profile with your own hands?

What is important to know about glazing aluminum profile?

The glass facades of modern skyscrapers are impressive, but few people know that the so -called stained glass of buildings does not apply to expensive types of finishes. The glass sections are mounted quickly, and the protection of buildings from external weather factors is quite effective, although this decoration is classified as cold aluminum glazing. The thing is that wooden frames are referred to as a warm type of glazing, but a glazed balcony with an aluminum profile frame automatically increases the temperature by several degrees.

Architects never supported the idea of \u200b\u200bunauthorized glazing of multi -storey buildings in the central streets, as this spoils the overall picture. However, this motivation did not stop people in the desire to create a cozy microclimate at home. A couple of decades ago, only homemade wooden frames could be used, so the balconies were equipped in different ways, and the face of the facade did not care for anyone. Today, standard glazing with aluminum profiles can be ordered immediately to the whole house in a specialized company, but it is still not as popular as in the West.

Wooden frames may be warmer, but they are much more demanding in leaving, crack, require frequent painting. Today there is a choice to put wooden or plastic windows on the loggia and balcony, make aluminum glazing of the veranda or give preference to aluminum frames to protect against the weather not external premises of the city apartment. Modern aluminum profile evolutionary breakthrough for finishing:

• balconies and loggias;
• facades of buildings;
• protection of office systems;
• the construction of transparent partitions, etc.

An aluminum profile is not only windows, but also a stable supporting structure, so it is used in places where it will not be possible to make another type of aluminum glazing, photo.

Varieties of glazing the balcony with aluminum profile

1. Remote glazing.

In some designs of insulated balconies and loggias, it is noticeable that there is an independent frame for framing, and glazing does not go beyond the balcony. But the techno offer a different approach when all structural elements are carried out of the railing. Sometimes such glazing resembles a polyhedron or hemisphere. When choosing such a balcony finish, it is taken into account that the balcony cannot be increased to lawlessness. This design can go beyond the base no more than half a meter. It is used only for cold glazing, and not to increase the area of \u200b\u200bthe apartment.

Violation of standards gives additional weight and can lead to collapse of the design of the balcony, especially if there is furniture and equipment. When arranging remote glazing, an additional steel frame is required. Such work can only be entrusted to specialists, and such glazing will cost almost twice as much. But in the additional space between the railing and the outer glass wall you can equip:

• wide window sill for balcony flowers and indoor plants;
• console for dinner or tea party in the open air;
• a countertop to work with a laptop, classes and study.

2. Bezramic glazing.

This variety looks quite spectacular and is actively used in the construction of expensive hotels. Large glass can replace entire walls or be built by blocks, as in the photo.

3. Cold and warm glazing.

This is the most common type of aluminum glazing of balconies and loggias, which is impossible without reliable framing by the type of frame on the frame. Aluminum metal, a conductor of cold and heat in a glazed space, so the usual design is considered cold.

When using double -glazed frames, glazing of balconies is called warm, although the difference in the temperature of the order of several degrees. The balcony needs additional insulation of the warm floor, isolation of external walls, and the removal of steam heating.

With proper decoration, the balcony or loggia is really much warmer, and the internal microclimate is much easier to maintain, especially when fetting the living room or kitchen with a balcony. In favor of a warm option, you can also add that the soundproofing and guaranteed protection against external factors will be higher.

Glazing of balconies with aluminum profile reviews confirm the effectiveness of the warm method of finishing. And the total cost will be lower than glazing with plastic windows.

Choose windows of swing or sliding

When compiling a primary sketch for warm aluminum glazing, it is important to think about how the windows will open and how much it is planned:

• swing windows;
• sliding windows;
• deaf frames.

1. Swearing windows work on rotary and oriental fittings, completely swing off or lean up at the top for regular ventilation.

2. Sliding are shifted on the rollers to the side, they are compact and convenient where there is nowhere to turn the transom.

3. Deaf windows do not open, a fixed sash is not intended for ventilation or other use.

4. There are other schemes, for example, attic or sliding vertically.

Attention: Professionals recommend to combine all types of structures for convenience that are appropriate, and not which seems simpler or cheaper! With experts, also discuss the characteristic features of the profile, whether there are thermal facilities and components.

Optimal glazing use all options for insulation and refinement of loggia, balcony or veranda. Swing windows are single and double -leafful, they are preferable in the center of the structure. With swinging, there is an alternation of open and deaf wings. There are also options for using single and double glasses in all types of windows.

A high-quality design of swing windows guarantees good tightness, hydro-, thermal and noise-insulation. Sliding windows are best installed where, due to the savings of space or design features, double-leaf-rustic windings cannot be installed. Also follow in which direction it is preferable to open single -leaf windows:

• to the right;
• to the left.

Attention: it is better not to use sliding windows in the cold season, since they sometimes get stiff. Moisture from rains, condensate and thaws accumulates in the guide runners, and grabs during frosts.

Advantages of glazing aluminum profile:

1. The aluminum profile is narrow, minimizes the delay in the flow of light relative and plastic frames.

2. The strength of the supporting structure, which is confirmed by practice and numerous tests, is three times stronger than PVC windows and 7 times more reliable than wood.

3. Environmental friendliness regarding other types of design does not require staining with toxic enamels and does not evaporate volatile substances when overheating in the sun, like plastic.

4. It has the longest period of operation, tolerates temperature changes and negative climatic factors well.

5. Resistant to corrosion and a change in the shape of the structure will last at least 60-80 years.

6. Universality in the formation of the most complex designs, you can use even curved glasses and broken structures of the facade with loggia and balconies.

7. The relative ease of glazing, therefore, can be used for dilapidated buildings where the facade is not recommended.

8. A noticeable saving of space relatively more other, more bulky structures, while the entire balcony can be glazed only with aluminum deaf and sliding frames with glass without the use of closed planes.

9. Convenience and simplicity in the use of balcony profile from aluminum, in addition to washing windows, does not imply other types of cleaning, there is no staining and restoration, like wood; Furniture is treated with machine oil once a year.

10. An excellent appearance will give today to even the balconies of old houses, and the aesthetic design can be duplicated as glass partitions when zoning the interior.

11. The possibility of choosing a cold and warm version of glazing, which gives significant savings.

12. The low cost relative to analogues, since it does not imply the use of additional building materials, blood pressure and the aluminum profile itself is cheaper than wooden frames and plastic analogues.

Attention: if desired, you can also combine wood, plastic and metal - to create special structures!

Stained glazing facade in a private house

In the modern development of construction technologies, not only profiled glazing facades of business centers, large trading youths or public buildings became possible. Spectacular aluminum stained glass glazing is increasingly offering architects and country houses, cottages, cottages for private construction. They are effective in the rapid construction of frame houses, which, in the presence of an established foundation, can be completed for one season.

Do not worry about the fragility of the structure, since usually for these purposes, special thick glasses of special hardening are used more than usual by 5 times. If desired, you can even put:

• armored glass;
• bulletproof glass;
• transparent plastic that bends;
• special mirror glasses (when everything is visible from the inside and nothing outside);
• plexiglas or plexiglass (does not beat, can be drilled and cut).

This is convenient for the formation of a special architectural plan.

The choice in favor of glazing aluminum profile

This type of glazing of loggias and balconies to Russia and the CIS countries is borrowed from Spain, and the facade glazing of buildings came from Britain. Aluminum is chosen as the main material, as the lightest and non -corrosion metal. It can be used in all climatic zones, especially where the plastic overheats and the tree is dry. Aluminum is able to transfer significant temperature changes and pressure into several atmospheres. These frames are reliable during a tornado, natural disasters or remote explosions.

When ordering the installation of such a design in a specialized company, remember the additional configuration:

• special fittings to prevent unauthorized opening of sections from the outside (it is important for the first floor or visor of related buildings);
• window sills (expanded or ordinary);
• mosquito grid to protect against insects;
• dOBORTS (profile) and tide;
• a visor for protection against precipitation from the roof and upper floors;
• penetrans for applying installation foam;
• furniture for aluminum sliding glazing and swing windows.

Is it possible to glaze a balcony with an aluminum profile with your own hands?

Due to the simplicity of the design, it is quite possible to glaze the balcony with an aluminum profile with your own hands. We make a reservation that this can be advised for ordinary cold glazing without complex architecture and expanding the area of \u200b\u200bthe balcony. When buying consumables, it is important to take into account all the features of the structures, make a preliminary sketch and think through the system of sliding and swing windows.

With independent glazing of the balcony, you can save on work if there is a tool and experience in working with wooden structures or plastic windows. When ordering a specialized aluminum profile, teach that there will be a gap for mounting foam on the sides, which should be closed by enlighteners. Also take 2-3 cm under the windowsill.

Installation is done strictly according to the plumb line and level, in order to avoid the inclination or curvature of the surface of aluminum profiles. The mounting seam fixes the design in 2 doses, adjustment is possible after the first layer of foam dries. The installation features should first familiarize yourself with the visual master class, where the balconies are performed by an aluminum profile video.