How to install and connect a heated towel rail with your own hands

A favorable microclimate, a comfortable and cozy atmosphere inside the house or apartment depends on normal humidity. The installation of a heated towel rail in the bathroom is an important task, since this room is more predisposed to the accumulation of moisture. Drops of water, wet towels create conditions for the development of mold, fungus. The correct installation of devices for drying towels does not require fundamental plumbing knowledge, skills or skills. Most home masters will be able to solve this problem. On the other hand, when performing work, you need to strictly follow the technology, take into account all the nuances, since the correct installation is designed for a long -term favorable result without unpleasant surprises.

Table of contents:

1. Varieties of PS models, their features
2. Modern PS materials, their dimensions, shape
3. Features of installing a heated towel rail with your own hands
4. Features of different options for connecting PS with your own hands
5. Important conditions, standard requirements for the installation of water PS
6. How to install a heated towel rail with your own hands
7. What is needed for high -quality installation work
8. DIY DIY DIY DISTING SYSTEM
9. Independent installation of a jumper and ball valves
10. Installation of a new PS on the wall with your own hands
11. The principles of installation of an electric or universal heated towel rail with your own hands
12. Typical mistakes of home masters when installing a heated towel rail with their own hands

Varieties of PS models, their features

To date, electric, water and combined types of towels are widely used. They function differently.

• The operation of water units is ensured by the circulation of hot water, which comes from central heating, DHW. This principle of operation of the device significantly saves energy. Installation of these devices is accompanied by certain difficulties, since they need to be connected to the general water supply system. In this case, the pressure of the water inside the water supply should be taken into account. Choose water models of dryers should take into account the indicators of the working pressure. For private houses, the choice of PS is wider, since these indicators in such buildings are much lower.
• Electric dryers are characterized by greater autonomy, since they do not depend on the water systems. The main thing is to ensure uninterrupted high -quality supply of electricity. It is important to correctly calculate consumption for 1 square meter, provide.
• Universal models work both with the help of water systems and, regardless of them. This allows you to save resources by switching the operating modes as necessary. The most significant disadvantage of such systems is their high cost.

Modern PS materials, their dimensions, shape

Configuration, the size of devices for drying bath accessories, the method of inserting pipes depends on the dimensions of bathrooms, their layout. To replace Soviet-sample heated vehicles, M-, P-shaped dryers are best suited. Investigations in the form of a ladder, model of modern, foxtrot requires a greater internal space of the bathroom. In each case, you need to try so that the installed design fits into the overall design of the room and does not clutter it.

Modern heated towel rails are made of brass, copper, stainless or black steel.

The advantages and disadvantages of each material can be analyzed using the table:

Features of installing a heated towel rail with your own hands

Before starting work, it is important to clearly represent the specifics of the functioning of such systems. The water variety of PS is part of the general hydraulicular system, heating, which functions due to the circulation of hot water. Thus, in the case of improper installation, problems often arise among neighbors. Therefore, such work should be treated especially responsibly.

The plastic water supply is the most universal, so you can connect to it without problems, canvasiswalls from various materials. On the other hand, in order to prevent electrolytic corrosion of important compounds and system nodes, it is recommended to use parts made of the same material. When carrying out installation work, you need to strictly adhere to the technology. The quality of functioning is directly affected by strict adherence to the installation schemes.

Features of different options for connecting PS with your own hands

Before starting work, it is important to clearly determine what system the heated towel rail will work. You can crash into the design of the common hot water supply. This method has significant drawbacks, since the dryer will heat up only when hot water consumes, and during the night the device heating during the day will be cooled.

If there is no hot heat supply, then the equipment can be connected to central heating. The advantage of this option is that the snake pipe remains hot throughout the day. On the other hand, this connection option has clear disadvantages. Firstly, such a configuration operates only during the heating season. Secondly, obtaining permission to conduct data from engineering work is possible only after developing a certain project and obtaining permission in housing and communal services. As a rule, such procedures take a lot of time.

A simpler option is the installation of an electrical device PS. In this case, it is enough to provide high -quality wiring and grounding.

Important conditions, standard requirements for the installation of water PS

To ensure reliable safe operation of towel dryers for a long time, the following points should be taken into account during the installation process.

1. The dimensions of the pipes extending from the dryer must correspond to the central water line in diameter.
2. It is recommended to install a jumper (bypass) at the point between the riser and the PS. This will provide stable water circulation throughout the riser and uniform distribution of heat. Bypass allows you to turn off the dryer using ball valves without harm to the common tap system.
3. It is strictly forbidden to mount shut -off cranes in the space between the riser and bypass, since the channel overlap in this place will cause a decrease in the pressure of the water, the temperature of the coolant in the neighbors.
4. The distance from the device to the wall should be 4-7 cm. The exact parameters depend on the diameter of the ps tubes.
5. It is recommended to set the heated towel rail height according to the instructions of a particular device. In any case, the dried dryer cannot be placed below 120 cm from the floor level.

PS should be started only taking into account the points described above.

How to install a heated towel rail with your own hands

Despite the fact that the installation scheme of the PS, a water -based PS, depends on the location of the central riser, the technology of its installation is universal.

The installation of a heated towel rail step by step consists of the following stages:

1. Dismantling of the developed equipment;
2. Arrangement of parallel bages from the central riser;
3. Installation of the jumper between the pipes and the locking devices of the ball structure;
4. Installation of a dryer for a prepared place;
5. Connecting a holistic system.

What is needed for high -quality installation work

Work with polypropylene communications involves the use of a plumbing soldering iron and a special knife. For eyeliner, plastic pipes with a diameter of 25 mm, fasteners, ball valves will be needed.

The standard package of a water heated towel rail usually includes the following components:

• telescopic design brackets;
• maevsky crane;
• adapters;
• locking devices;
• silicone gaskets.

To prevent electrolytic corrosion, when assembling a holistic design, components should be used only from the same metals.

DIY DIY DIY DISTING SYSTEM

Before carrying out these work, it is necessary to obtain permission to the housing office, since the removal of old equipment is associated with the temporary shutdown of the central riser of water.

The step -by -step technology of independent dismantling includes the following actions:

1. the dryer for towels of the old -sample as part of a single system of hot water supply must be carefully cut off by a grinder;
2. remove the old coil;
3. cut the thread.

The height of the cutout on the riser is mandatory to be greater than the distance between the pipes of the new PS per size, which corresponds to the length of the couplings, the drives used for bypass.

Independent installation of a jumper and ball valves

At the ends of the heated towel rail, shut -off devices of the ball structure are usually installed, which are designed to turn off the new PS. For their installation, using the dicks of suitable diameter, threads are cut into the remaining pipes. If the old cut is preserved, it is enough to update it. Between the riser and the taps, install the reach of the bypass. This will allow you to freely circulate the water with a disconnected dryer for bath accessories.

Installation of a new PS on the wall with your own hands

The installation technology of a coil of a heated towel rail depends on its model. On the other hand, the procedure for hanging on the wall of this equipment is standard.

Such work needs to be done in the following sequence:

1. first, apply horizontal marking for brackets;
2. drill holes, insert dowels into them;
3. screw the brackets to the PS, attach the device to the wall at the recommended distance and fix it;
4. attach the device to ball crashes.

The device is ready for use. You can open the taps and check its work.

The principles of installation of an electric or universal heated towel rail with your own hands

Before connecting the device operating from electricity, you need to take care of dismantling the old device. Such work should be carried out with particular caution. The main thing is not to damage the central vertical water line. If the PS is purely electric, then the riser can be directed with transit using a jumper.

Thus, the installation of a device for drying towels can be performed on your own if you strictly follow the instructions and adhere to plumbing installation schemes.