Deep pump Aquarius

It is difficult to overestimate the significance of the deep pump in the water supply system of a country house, especially if the well is the only source of water. A competent selection and high -quality installation of a device for supplying water allow you to use an autonomous system for a long and uninterruptedly.

An excellent assistant for residents of rural areas, summer residents and owners of country houses often become deep pumps Aquarius from Promelectro company. A wide range allows you to choose a pump corresponding to specific operating conditions, and the increased performance and adequate price of the equipment make pumps in demand among buyers.

Content

1. Deep pumps Aquarius Balance Prices and Quality
2. Device and principle of operation of the deep pump Aquarius
3. Buggage pumps Aquarius: models and their characteristics
4. Installation and connection of the pump Aquarius
5. Service of the deep pump
6. Possible breakdown of the pump and the procedure for their elimination
7. How to choose the right pump Aquarius

Deep pumps Aquarius Balance Prices and Quality

Submissive pumps Aquarius have been manufactured by the Kharkov company Promelectro since 1996. The company produces a whole series of household electric pumps with a height of up to 200 meters and with a capacity of up to 12 m3/h. Technical and operational characteristics allow the use of deep water for pumping water from sand and artesian wells.

Among the advantages of pumps Aquarius can be attributed:

• the main parts are made of brass, food plastic and stainless steel, this allows the use of equipment for the supply of drinking water;
• small electricity consumption;
• overall dimensions and small mass of equipment;
• resistance to voltage drops;
• operational equipment is as complete as possible;
• service (manufacturer warranty 1.5 years);
• noiselessness;
• increased performance;
• maintainability;
• the pump does not need to be removed for the winter period;
• the presence of a long electric cable facilitates the installation process;
• the long service life of the deep pump Aquarius (consumer reviews show that the pump can be operated uninterruptedly for a long time, and in the case of repairing problems with the purchase of spare parts).

The price of the Deep Aquarius pump depends on its technical characteristics and fluctuates in the range from 7500 to 17500 rubles.

Deep pumps Aquarius comply with the international security standard IEC 335-1 and are not inferior in terms of quality to the Grundfos, Calpeda and Pedrollo European brands. Among the manufacturers of the CIS countries in quality, pricing, design, demand and reliability, Aquarius pumps have no analogues.

Device and principle of operation of the deep pump Aquarius

Consider the device of the deep pump Aquarius. The electric pump consists of a multi -stage pumping part, an electric motor and a remote condenser box.

The electric motor is filled with oil and consists of a rotor, stator and rotating ball bearings.

The pumping part is represented by a monolithic unit, in which there are scapulars, workers and guide wheels, as well as a drive shaft. The lid with the inner pipe thread fixes all the details in place. The lid provides holes for attaching equipment with a cable.

The diameter of the working wheel determines the productivity of the pump volume of water, which the pump can raise for a certain period of time

The lid with the inner pipe thread fixes all the details in place. The lid has two holes for attaching equipment with a cable.

In the condenser box there are a power cord and capacitors that provide the operation of the electric pump.

In the pumps of Aquarius, reliable German automation is used to protect equipment during critical operating modes. A remote control device is attached to the power cord.

The principle of operation of the deep pump Aquarius of the centrifugal type is as follows. As a result of the rotation of the working wheel, kinetic energy is formed, which is transmitted to the blades and affects the particles of the substance, that is, water. The liquid located in the working wheel area rises to the upper part of the pump body, and the new under pressure comes to its place. The transition of water is supported by constantly rotating wheels.

Buggage pumps Aquarius: models and their characteristics

Promelectro company produces various series of deep pumps Aquarius. All the most significant characteristics of the model can be learned from the very name of the pump. For example, pump BCPE-0.5-32U 60/47:

• BCPE household centrifugal submersible pump;
• 0.5 Equipment performance (0.5 l/s);
• 32 nominal pressure with nominal volumetric feed, indicated in meters;
• 60 greatest performance (60 l/min or 3600 l/hour);
• 47 The height of water lift at maximum pressure.

All centrifugal deep pumps for wells are classified by performance for four groups:

1. BCPE-0.32;
2. BCPE-0.5;
3. BCPE-1,2;
4. BCPE-1,6.

Series pumps BCPE-0.32 Designed for work in low -cost wells, wells, with a diameter of 120 mm.

BCPE-0.32 pumps are suitable for use in the household if water consumption does not exceed 2 m3/hour. It should be noted that the nominal water consumption in normal mode is about 1.15 m3/hour

The range of the series has nine models that differ in the indicator of nominal pressure consumed by power, dimensions and costs. Consider the technically the characteristics of the deep pump Aquarius on the example of the BCPE-0.32-63U model:

• performance 0.32 m3/s;
• pressure with a nominal supply of 63 m;
• voltage 220 V;
• network frequency 50 Hz;
• maximum pressure 90 m;
• nominal power consumption of 1000 watts;
• current consumed 4.5 A;
• rotation speed is 2800 rpm;
• the capacitor with a voltage of 400 V has a capacity of 32 μF;
• the mass of the device is about 17 kg;
• number of steps of work 11;
• the estimated price of the deep pump 63 in the BCPE-0.32 10500 rubles series.

Each set of pumps of this brand includes a strong nylon cable for installing the pump in the well and a long electric cable.

Deep pumps of the series BCPE-0.5the protection of the electric motor from overheating has an additional function. The submersible unit can be used both in the automatic water supply system, and in manual mode.

Pumps of the BCPE-0.5 series can be used in wells and wells with the volume of incoming water at least 25 m3/h and with a diameter of 110 cm. In addition, such pumping equipment is suitable for pumping water from mine wells, tanks and open water bodies

The series reads eight modifications of the pumps: the smallest nominal pressure 16 meters, the largest 100. Consider the characteristics of the pumping pump 16 from the BCPE-0.5 series:

• performance 0.5 m3/s;
• pressure with a nominal supply of 16 m;
• voltage 220 V;
• network frequency 50 Hz;
• current current 1.8 A;
• maximum pressure 27m;
• nominal power consumption of 400 watts;
• rotation speed is 2800 rpm;
• the mass of the device is about 8 kg;
• the capacitor with a voltage of 400 V has a capacity of 14 μF;
• number of steps of work 3;
• estimated cost of 7000 rubles.

The pumps of this series are able to provide uninterrupted supply of water for watering the garden, garden and household needs.

Deep units Aquarius BCPE-1,2they can be used in wells and wells with an inner diameter of 120 mm. The pump is recommended for water supply with a temperature of not higher than 35C.

Water should not have mineralization of more than 1,500 g/m3 and contain a large amount of sand. Pumping acid, alkaline solutions and liquids is prohibited

The series is represented by eight models (minimum feed pressure 12 meters, maximum 80). Technical characteristics of different modifications are presented in the table.

The highest performance is possessed by pumps from the series BCPE-1,6.Equipment is produced in three models with total pressure with a nominal supply of 25, 32 and 40 meters.

Technical characteristics of BCPE-1,6-40U: video

Installation and connection of the pump Aquarius

When installing BPCE Aquarius, some general recommendations for the installation and operation of submersible pumps should be taken into account:

• The remote capacitor box should be located under a canopy or indoor.
• During operation, the pump should be completely immersed in water.
• The distance from the pump to the bottom of the well is not less than 40 cm.
• The first inclusion of the electric pump can be done no earlier than 5-10 minutes after the equipment completely immersed in the water.

Let us consider in a stages the process of installing and connecting the pump Aquarius:

1. Preparatory stage:
   • make sure the integrity of the power cord;
   • connect the pressure pipeline how exactly the pipeline will depend on the goals of use and the depth of the pump installation; In a stationary installation and connection to the accumulator, it is necessary to mount a pipe made of plastic or metal, but if the pump is used only for watering the garden, garden and filling the containers with water, then you can install a watering hose.
2. Found valve installation. A check valve is not installed at the factory, but it must be included in the type of depth pump Aquarius, which will work in a closed pressure system. The check valve can be mounted in two ways:
   • inserting into the pipeline directly into the pipe;
   • installation of the valve at a distance of no more than 1 meter from the output pipe.
3. Trick mounting. Pass through the eyes in the cover of the electric pump case and firmly attach the cable.
4. Closure of the cable in the pressure pipe using special brackets.
5. Connection of the pump through the network cord to the outlet.

Gently lower the electric pump into the water, holding the cable and the pipeline. It is necessary to control so that the power cord does not experience tension.

Before turning on the pump, you need to make sure of its complete immersion in the water

Service of the deep pump

Deep pumps of Aquarius are designed for a long period of service, and the uninterrupted work already depends on the user himself. Compliance with the rules of operation and a periodic inspection guarantee that the pump will work for many years.

Once every two years, the pump must be pulled out of the mine and inspected. It is necessary to raise the unit as carefully as possible so as not to break the pump flask against the wall walls. The extracted pump is checked for the presence of cracks and chips. The appearance of such defects can lead to expansion of water during the freezing of the source.

The engine axis should rotate smoothly and easily. If the engine shaft is scrolled with difficulty, then the replacement of the bearings is necessary. If necessary, it is necessary to add oil and the oil seal. The engine winding should be examined on overheating traces.

Dismantling the deep pump Aquarius should carefully carry out the insulation of the cable becomes fragile over time and it can be easily damaged

With reduced pressure, it is most likely to change the working wheels. This work is best entrusted to specialists.

Possible breakdown of the pump and the procedure for their elimination

Consider possible malfunctions, causes and procedure for their elimination.

The pump is not included in the operation.

Possible reasons and elimination:

• lack of voltage in the network check the state of contacts in the outlet and fork;
• insufficient voltage on the network, set a stabilizer, a car vestranisformer;
• flowing the electric pump with sand, raise the pump from the well, rinse with clean water.

Reducing the performance of the pump.

• rupture of the pipeline and the fastening malfunction lift the pump and check the integrity of the pipeline, eliminate defects;
• the filter holes clogged to raise the pump and clean the filters;
• a sharp voltage drop in provide a normal voltage of 220V.

The protective device is triggered after short -term operation.

• the voltage in the network below or above the boundary limit, turn off the pump until the normal voltage is installed;
• the pump is clogged with sand to raise the unit, rinse in clean water, include in the network and let it work on yourself.

We will analyze in stages the repair of the deep pump Aquarius, if the unit is clogged:

1. Remove the protective grid. If it is attached with a special clamp, then you need to press a little in the middle and lift the net with a screwdriver. On some models, the mesh is attached to two ordinary screws that simply unscrew.
2. Remove the cable channel with a metal groove that protects the cable from damage. This element is present in wide models of pumps.
3. Separate the pumping part from the engine to unscrew the four bolts with a 10 -key to 10 and remove plastic couplings.
4. The disassembled structure is carefully laid on the horizontal surface.
5. Take the shaft with a end key, holding the upper part of the device.
6. Rinse the pump thoroughly and collect it back.

How to choose the right pump Aquarius

The right choice of the pump is the key to its long -term work. When choosing the optimal model, it is necessary to take into account the characteristics of the well and observe some conditions:

• the debt account should exceed the performance of the pump, since over time the source debit is reduced due to siltation;
• determine the required pressure of the electric pump based on the distance from the water intake point to the accumulator and pressure losses on the horizontal section of the pipeline.

According to the schedule of pressure characteristics, you can determine the suitable model of equipment.