Features and specifics of siding for a log. How to install siding panels with your own hands

Available cost, excellent performance, variety of models and attractive appearance make siding widely used in the decoration of facades. There are more than thirty varieties of siding, which differ in composition, type, texture, principle of manufacture. Features of installation and the specifics of siding for the log will be considered further.

Table of contents:

1. Advantages and disadvantages of siding panels for logs
2. Features of siding for logs
3. The main types of siding for the log and their characteristic
4. Recommendations for choosing siding for logs
5. Do -it -yourself siding tool
6. Siding technology for logs
7. Features of siding under logs
8. Installation of metal siding for a log with your own hands

Advantages and disadvantages of siding panels for logs

Siding has a large number of advantages, thanks to which it is often used in the decoration of the facades. This material imitates various textures such as wood, natural stone, metal, tiles. Among the pluses of siding, we note:

• Easy to care - the material does not need painting, priming - to improve the attractiveness of the coating, it is enough to rinse it with water;
• The ease of installation work - for installing siding does not require specialized equipment and skills to work with it, it is enough to install a crate and mount the panels, snap them for each other;
• Installation work is carried out both in summer and in winter - there are no restrictions on the installation of siding;
• Universality of use - using siding, they perform not only external finishes, but also decorate the premises;
• has a long service life, which is more than fifty years;
• It differs in the type of base: vinyl, metal, plastic, cement, wooden;
• differs in a large number of color and texture solutions;
• It is not exposed to moisture, insects, fungus and mold, tolerates temperature fluctuations and ultraviolet radiation well.

Despite this, Siding has certain shortcomings, such as:

• synthetic origin - the material does not contain natural components;
• A vinyl -based siding is characterized by low fire safety and an inclination of ignition, in addition, in the process of combustion, the material distinguishes dangerous smoke, therefore it is forbidden to use siding on a vinyl basis in the decoration of industrial premises;
• Under the influence of a low temperature, a vinyl -based siding loses its strength and easily breaks with the slightest mechanical damage.

Features of siding for logs

The decoration of the house with a galinded log is a rather costly and long process. A more budgetary and simple solution will be the purchase of siding for a log. Siding panels in appearance practically do not differ from natural wood. In addition, they are simpler in care, do not require special processing and tolerate weather conditions well.

Siding protects the building from precipitation, and under the crate can be installed by insulation, which additionally heat and soundproof the structure. The low weight of plastic does not load the surface, thereby increasing the duration of the entire house.

The scope of use of siding for the log is quite wide and includes:

• construction and decoration of cottages;
• decoration of arbors, verandas, extensions;
• repair of the existing facade;
• finishing of country houses;
• Use for the construction of small architectural forms.

There are many types of siding for a log that differ in type, shade, wood structure. Panels with a flat and embossed structure are distinguished. Additionally, a set of fasteners in the same color scheme for creating a whole image is sold with panels.

The main types of siding for the log and their characteristic

Two main options for siding under the log are distinguished:

• based on metal;
• Based on plastic.

For the manufacture of the first option, cold -rolled galvanized steel is additionally covered with a polymer protective layer. These materials are characterized by high strength and good performance.

Vinyl -based siding is cheaper and is characterized by a large expansion coefficient under the influence of temperature changes. Therefore, the lamellas of such siding have a lock mount to withstand the damper gap. In addition, this material is less frost -resistant, it tolerates mechanical loads worse, does not have refractory characteristics.

Another variety of siding for the log is a chemically modernized material, which is characterized by a lower thermal expansion and increased resistance to ultraviolet expansion.

Metal siding is more reliable, but requires additional insulation, compared to plastic, which is characterized by high thermal insulation properties.

Recommendations for choosing siding for logs

When choosing siding for a log, pay attention to such characteristics as:

1. Uniform color.

The inner and outside of the panels should be identical in color. The option is possible when the inside of the siding is painted in lighter color, this is permissible only for budget types of siding.

Siding for log photo:

2. The thickness of the panels.

Determine the thickness of the panel, it should be the same on the entire cut. This factor determines the opposition of siding by power loads. In the presence of large differences in thickness, it is better to refuse the purchase of such material.

3. holes for fasteners.

The shape of these holes should be identical on each of the panels. The presence of terry or uneven edges is not allowed.

4. The appearance of the front surface.

The outer part of the coating should have a matte base. Vinyl siding does not have a glossy shine. Since the gloss is heated faster under the influence of solar radiation and loses color.

5. Pay attention to the packaging.

To protect siding from deformation or mechanical damage, it is packaged in boxes of cardboard. A good manufacturer also take care of the instructions for the material with detailed recommendations for its installation.

6. Test siding.

Try to bend one of the panels, if the sample breaks, then siding is at a low level and it is better to refuse to buy it.

Also, find out from the seller information about the manufacturer, the country in which the material is made, ask for quality certificates. Most manufacturers give a guarantee for goods, which is from 30 to 50 years. Remember, good and high -quality material is not cheap.

Dark siding is more expensive, since special stabilizers are used to protect it from burnout. Also, dark panels heat up faster from the sun, so they need enhanced deformation protection.

Do -it -yourself siding tool

For the maximum attractiveness of the appearance of siding along with the panels, purchase accessories that are identical in color. Block House joins directly using H profiles.

In addition, the presence of:

• profiles of the starting and finishing purposes;
• j
• H-connectors;
• Sofitov;
• internal and external angles.

For cutting metal and plastic siding, the same tool in the form is used:

• scissors for metal;
• Bulgarians;
• electric saw.

To obtain a neat and even cut, only half of the length of the scissors is used. The most accurate edges are obtained when using a grinder with the ability to adjust the speed of rotation of the nozzle.

Siding technology for logs

Vinyl siding is easily installed on the walls of the house. Previously, the surface is aligned, in the presence of cracks, cracks and chips - they are sealed with plaster or putty for external work on a gypsum basis.

Remember that the result of the installation work depends on the correct installation of the first panel. The lower part of each plate is equipped with a lock, and the upper one with a perforated edge on which there is a hole for screws.

In order to create a solid coating of the plate with an overlap, the type of approach to the door of the house determines the procedure for performing installation work. The size of the overlap should not exceed 2-2.5 cm. When connecting the upper parts, the temperature gap is left, the value of which is indicated in the instructions from the manufacturer. Between the horizontal panels leave the same gap, only twice as much.

In order to prevent warring - use high -quality fasteners recommended by the manufacturer. Do not use fasteners without galvanized coating, over time they will begin to rust and spoil the appearance of the facade.

In the process of fixing elements such as drains, shutters, lighting devices, make sure that they do not interfere with the temperature expansion of the material. It is forbidden to seal overlaps, as well as the junction of the panels with the gutters.

Features of siding under logs

In order not to damage siding during the transportation process to the object, store the material no more than twelve boxes vertically. Choose a spacious room for storing material, with an even flooring, lack of moisture, mold and fungus.

After the installation of vinyl siding, it is enough to wash it with ordinary water and a brush or rag. This material does not require additional care.

Metal siding has a polymer coating, which in the presence of mechanical damage begins to rust. In order to prevent this, if there are small chips on the surface of the siding, treat this place with an anti -corrosion primer.

Installation of metal siding for a log with your own hands

At the preparatory stage, fastening of the drainage system, decor elements, plants and other objects that interfere with work are removed from the facade. The structures of the load -bearing walls are strengthened, prepared for additional load. In the presence of a layer of fragile plaster - it needs to be removed.

After complete leveling of the basement, the marking process begins under the crate. In this case, be sure to use the level or level.

Two options for crate for siding are distinguished:

• made of wood;
• from metal.

The first option will cost cheaper, in addition, it is easier to install such a crate. Despite this, a wooden crate is not devoid of shortcomings - a tendency to bezed, shrinkage, deformation and a short service life.

If you still decide to dwell on the wooden version of the crate, consider the following recommendations:

• The size of the bars for metal siding is 5x5 cm;
• wood humidity is not more than 13%;
• Mandatory protective treatment with anti -pirens, antiseptic and moisture resistant compounds.

The metal crate has a long service life, is not prone to deformation, and is easily installed. The gap between the profiles is determined by the type of siding and the individual characteristics of the building. With horizontal installation of siding, the lamp panels are installed vertically. If there are adjacents to the doorways, install a continuous crate.

Next follows the process of thermal insulation of the walls. It is recommended to install thermal insulation material, since metal siding does not have the properties of heat saving, compared with plastic.

With multi -layer laying of thermal insulation material, block the joints between the plates, try to fill the inside of the crate as tightly as possible. To fix the insulation, plastic dowels are used 5 cm long more than the insulation width.

Additionally, install waterproofing, especially if mineral wool was used as thermal insulation material. This element will positively affect the life of the facade and prevent its destruction. The installation of the superdiffusion membrane will protect the facade not only from moisture, but also from the wind.

Next, the installation of siding itself follows. The starting strips are originally installed, under the pre -built marking. Contabbed elements adjacent to the windows and doors are installed directly on them.

Start installation work from the back of the house. First of all, install siding in the corners and in the places of adjoining. Keep in mind that the upper and lower profile should be located identical. The house is finished with siding under the log in a horizontal position. Do not press too tightly fasteners to siding, leave a small gap for the temperature expansion of the material. Screw the fasteners directly in the center of the factory hole.

Upon completion of the work, the tightness of the joints is checked, the elements of the drain are installed.

Installation of siding video: