Site search

 

 
.

The security and inaccessibility of any home depends on many factors, and the presence ...

.

The construction of the reinforced concrete foundation in the construction of the building is evidence of its ...

.

Preparation of the surface, one of the main stages before laying the coating. ...

How to install insulation for siding

Each owner makes maximum efforts so that his house is as comfortable and warmer as possible. Once again, starting to facing your housing, you should think about how to spend installation of insulation for siding. The process of insulation is one of the most important nuances in the arrangement of housing. It will not only allow you to feel comfortable in the room, but also reduce your heating costs.

Installation of insulation for siding can be carried out in 3 in different ways. Consider each of them in more detail. The first option is the most economical. In the form of isolation, we use material in the form of rolls. It can be found in every construction store. The thickness of such a heater is from 3 to 20 millimeters. The existing material should be expanded and glued to the wall. Next, you can mount the grate for siding. A similar method is not the most reliable, since its protection is limited to the presence of drafts. Nevertheless, it is better to insulate in such an option than not to be insulated at all.

The second option is inserting the plates between the frames. As an isolation material, we use a mineral wool. Polistyle or polyurethane plate is suitable. These plates should be inserted into the gaps between the soliders. It is worth calculating the thickness of the bars in advance, it should exceed the thickness of the insulation by 2 5 centimeters. It is recommended to mount the material to the wall with glue or mastic. You can use screws, or beacons.

The third method of insulation is based on the structure of the cross base. This is one of the most expensive insulation. First you need to repeat the second type diagram, only using horizontal frames. Then additionally attach the siding siding to the wall in an upright position. The next step will be the insulation with the help of plates. Fastening to the wall is recommended to be carried out by using special beacons.

For those who are interested in bolts in the German standard DIN (analogue of GOST) 933, we offer metizes wholesale. A large assortment, affordable prices, delivery.

 

 
0

 

Comments

(IF You're a Human, Don 'Change the Following Field)
YOUR FIRST NAME.
Anonymous ( fast registration on the site)