Isospana membrane: Features of the material and subtleties of fastening

The process of choosing wind, hydro- and vapor protection should be carried out with special care, since among the large number of manufacturers, you need to choose the material that will be the most reliable. The company's membrane is -specific has established itself as a high -quality product, the strength of which has been tested for years. We will talk about the features and intricacies of installing the membrane of the isospan.

Table of contents:

1. Isospan membrane - features and general information
2. Advantages of using the isospan materials
3. Isospan characteristics and variety of material
4. Varieties of membranes isopan and their features
5. How to lay isopan: Features of the installation of a membrane

Isospan membrane - features and general information

To create comfortable living conditions in the house and in order to improve the duration of its operation, you should take care of installing high -quality insulation. It will help protect the foundation base, walls, ceilings and ceilings from the destructive effect of the environment.

Without the use of insulating materials, moisture, wind or condensate can destroy both the external and interior decoration of the building. In this case, the use of high -quality insulation, which the materials of the company Isospan, is recommended, is recommended.

These products have been produced on the market for more than ten years, and is in great demand in both consumer and professional construction. For the manufacture of waterproofing materials, Isospan uses a special individual technical base. The quality, the products manufactured are carefully monitored by specialists from the development department.

The isospan materials that provide steam and moisture protection are characterized by the availability of certificates of conformity, fire safety certificates.

A wide variety of types and forms of materials isospan allows you to choose exactly the type of isolation that the buyer needs.

Isospan photo:

Over the long time of the company Isospan in the modern construction market, products appeared, outwardly similar to the products of Isospan, but having dubious quality and low technical characteristics. To avoid fakes during the purchase of the isopan membrane, you should adhere to such rules:

• All materials have a specialized branded sleeve and packaging, a special sleeve made of polyethylene is used to pack the membrane, with proprietary coloring and a special seal;
• each of the rolls is equipped with an instruction for operation and information leaflet, which represents other products of the company;
• On the inner surface of the sleeve, on which the material is available with the hex logo;
• One of the ends of the roll has a logo indicating the information about the party, the number of the packer and the date of manufacture of the goods;
• All side sections of the roll are sealed with tape, having individual designations with the name of the material.

Advantages of using the isospan materials

Due to the presence of heat -reflecting characteristics, the isospan materials provide reliable protection of any types of buildings from wind and moisture.

Thanks to the use of vapor barrier, isospan is excluded the risk of increased humidity in the attics, and with the help of heat -reflecting properties it is possible to provide reliable protection against the formation of condensate masses.

Using mounting connecting tapes, it is possible to ensure additional tightness of the mount. In addition, the functions of the material are still added to the provision of additional wind protection of the building.

The scope of use of the isospan membrane is quite wide and extends to the internal and external insulation of the walls, roofs, floors, ceilings, thereby ensuring the risk of condensation and damage to the finish.

It is possible to use iso -specific insulation as a substrate for the floor. In this case, even infrared rays reflect the materials and direct the heat stream directly into the room.

Using these materials allows you to provide reliable protection from:

• impact of high humidity;
• the formation of condensate masses;
• Winds.

In addition, the functional features of membranes can reduce the temperature load associated with seasonal temperature changes. Isolation can protect the insulation in the system:

• facade purpose;
• roofing structures;
• walls and inter -story floors;
• flooring.

In addition, the use of the isospan materials allows you to create favorable and comfortable conditions for living in the room.

In the relationship with the main functional features of materials presented in the modern construction market, the products of Isospan are characterized by:

• ensuring wind resistance and protection of roofing systems;
• vapor barrier of walls and ceilings;
• Connection of the joints of materials using connecting tapes.

Isospan characteristics and variety of material

We suggest studying the entire spectrum of products that the company is -specific:

1. Members or films of waterproofing steam protection and windproof purposes.

Hydro- and wind protection is made to ensure the protection of elements of the insulation system and structural elements of the building from the formation of condensate masses, winds and moisture, which falls from the environment.

At the same time, the outer side of this protection has a vapor permeable shell, with which all water vapors and accumulations are eliminated.

The use of these materials is common on the design of roofing, wall -mounted, as well as to ventilated facades. Thanks to the combination of high water resistance and vapor permeability, the membranes data are in high demand among consumers.

2. Films of vapor barrier and water protection.

These materials protect the insulation on the walls, roofs and ceilings from the ingress of steam and the formation of condensate, which significantly reduces the quality of insulation.

Using steam and waterproofing films, thermal insulation of the insulation is maintained and the life of the entire structure is extended. In addition, condensate is not collected inside the walls, mold and fungus are not formed and corrosion does not form on metal elements.

3. The heat-waterproofing of the reflective type, which has the effect of energy conservation.

These materials have a metallized surface that reflects infrared rays and provides reliable protection of the insulation from steam from the inside and from moisture from the external. Using these materials allows you to save energy to heat the room in the winter.

4. The use of connecting tapes allows for reliable docking of the material for a long time.

Varieties of membranes isopan and their features

1. Aqua Aqua Prof - appears in the form of a professional cod protective membrane, which provides protection for insulation and roofing system from wind, increased humidity and condensate masses. The laying of the material is carried out directly for insulation materials, ventilation gap, in this case, is absent. Thus, you do not need to spend money on the arrangement of a special crate.

This material has high properties of vapor permeability, stability before light and moisture. In addition, it is stable before mechanical damage, and any weather is suitable for laying it.

Field of use of the material:

• surfaces of insulated and unsold inclined roofs;
• arrangement of frame walls;
• external wall insulation;
• waterproofing of ventilated type facades;
• arrangement of attic floors.

The material per 100 percent consists of polypropylene, it is able to operate in such a temperature mode -60 to + 75.

2. Isospan am - vapor -permeable membrane, which consists of three layers. It is used to ensure the protection of thermal insulation and elements of the roof and wall systems from moisture and condensate formation. The material has high moisture -pushing properties, but at the same time it is vapor permeable, therefore it increases the life of the building.

It is forbidden to use the material as any of the types of roofing finishing coating.

3. Isospan AC - has the form of a three -layer membrane, which is used to protect different parts of the building from moisture, wind and condensate masses. Among the advantages of the material should be highlighted:

• simplicity of installation and conducting welfare work;
• high stability before moisture;
• high level of strength before stretching and gap;
• high level of vapor permeability;
• stability before ultraviolet radiation;
• environmental harmfulness and safety of application;
• The ease of transportation, convenient shape and lightness of weight.

4. Isospan A - a vapor -permeable membrane that protects the insulation and surface of the walls from atmospheric exposure and wind. In addition, it helps to remove steam from the inside of the room. The laying of the material is carried out from the outside of the insulation to the surface before the external finishing work. Due to the use of the membrane, the quality of insulation improves and the life of the entire building is extended.

The scope of use applies to:

• the surface of the frame walls;
• external surfaces of the walls;
• Ventilated facades.

5. Isospan fire -retardant action (OZZD) A is a new type of wind and moisture -proof membrane, which has fire -retardant additives. The use of a membrane of this type provides not only the protection of the structure from the wind, condensate and moisture, but also prevents its accidental fire, which occurs such cases:

• in the process of welding;
• in the process of waterproofing of the basement;
• In other situations.

6. Isospan AF - non -combustible membrane used in the process of waterproofing of facade areas of the ventilated type, insulation and other structural elements of the building. The material is based on the use of fiberglass, which is absolutely non -combustible.

7. Isospan AF+ - non -combustible membrane with enhanced characteristics, which is used for the purpose of wind and waterproofing of the elements of the building. In addition, using the use of this material, additional protection of the building from the fire is ensured.

How to lay isopan: Features of the installation of a membrane

In the response to the question of which side to lay isoospan should be extremely careful, since incorrect laying of the material will lead to a violation of the integrity of the waterproofing system.

The membrane on the one hand has a layer that passes the air, thereby providing deliverance from condensate, and its other side is not able to miss moisture or wind.

We offer to familiarize yourself with the recommendations for the installation of the membranes isoospan AS and am. They are used to ensure the protection of roofing from the effects of wind and moisture. The material is mounted directly on thermal insulation materials, while the ventilation gap should not be observed. The smooth blue side of the material should be outside the roof.

These types of membranes provide reliable protection of the building from atmospheric precipitation, wind or defects of roofing. In addition, with the help of the membrane, moisture is eliminated through the surface of the insulation.

These membranes are not used as the main or additional roofing materials.

If the membrane is installed on the insulated roof, then the insulation is cut and rolled directly on it. It is better to start installing from the bottom of the roof. The minimum overlap is 150 mm. To fix the stretched material on the surface of the rafters, a construction stapler is used.

Next, wooden antiseptic counterparts are mounted on the material. Their fixation is carried out using nails or screws. A vertical overlap or a joint of two parts of the membrane is pressed by counter -attack. In addition, a crate is mounted on them, for further roofing. Between the outer part of the membrane and the roofing, a ventilation gap should be contained, which will help to remove condensate from the subcutaneous space. In addition, it is necessary to worry about the arrangement of the ventilation gap in the skate part.

The membrane is fixed in a stretched position, with the help of the lower edge, the lower condensate runoff is provided, which enters the drainage system.

Installation of the isospan A, AF is carried out with an aging of a ventilation gap of 4-5 cm, over the insulation, rafters or crate.

If the materials are laid on the insulated roof, then the rolling and cutting of the material is carried out on the rafters. The installation is carried out by laying horizontal paintings overlap, while their smooth side should be outside. The minimum overlap is 150 mm.

For fixing the paintings, counter -income are also used, which are fixed with nails or screws. The minimum sagging of the membrane is 2 cm. The material should not in contact with the insulation or continuous wooden areas, as this negatively affects its functional activity.

Application of isospan video: