The fatter under the sink. Features of choice and installation

Frequent blockages in sewage systems are one of the most common problems that the owners of country houses are faced with, where autonomous sewage operates. The reason for this is the uncontrolled discharge into the sewer system of insoluble substances, the insufficient slope of the pipes, which is considered one of the most common errors made during the installation of the sewage system, as well as the excessive discharge of wastewater, in which there is an excess of fatty particles. One of the main solutions that can completely eliminate the deposition on the pipes of fat particles is considered to be installed a fattyer under the sink.

Content

What is a fat manner?

The fatter is a device that prevents the ingress of fats and various oil liquids into treatment facilities and sewer pipes.

The principle of the functioning of this device is the fractional separation of liquid and fats, and therefore the second name of the separator device. The separation of fatty substances from water occurs due to the difference between the specific gravity of fats and water.

Fat particles, the specific gravity of which is significantly lower than this indicator for water, is delayed in a special sump, from where the purified water enters the sewer system.

Performance indicators and the effectiveness of the fat manner

Fatty soldiers have become an integral device, the installation of which is practiced in cafes, restaurants, as well as in industrial enterprises, but recently, domestic fatty fathers for sinks, which proved their high efficiency in a short time, have begun to gain popularity.

Experts were able to prove that sewer pipes, as well as septic tanks and cesspools, operate several times more efficiently if the fatty films are installed at the main points of waste reset.

The modern market offers a large number of fatty fathers for the sink, the photo of which can be seen in this article. The wide variety of devices sometimes complicates the choice of the most suitable, but specialists combined separators into several classification groups, which will be considered below.

The main varieties of fatty caps

Before buying a fat cloth for a sink, the owners of country houses should familiarize themselves with the main models of devices that can be conditionally divided into several groups similar to one or another. The main features that have been reflected in the modern classifications of fatty growers are the material used for the manufacture of the case, and the method of installing the device. Let us dwell on each in more detail.

Varieties of separators depending on the body material

The following materials are used for the manufacture of modern fatty films:

Stainless steel;
Plastic;
Fiberglass.

Plastic fatty fathers for washing, the price of which is one of the main advantages of the device, is considered the most popular among consumers. This is due to a number of advantages of the kitchen fatter, which must be paid attention to when choosing a device:

A long period of operation exceeding 30 years;
Ease of maintenance. The plastic fatter is easily subjected to preventive cleaning with the help of improvised cleaning agents;
High environmental friendliness due to the characteristics of the material;
The possibility of manufacturing devices taking into account the specific requirements of the customer.

Fiber -plastic fatty caps are used mainly for industrial purposes and are installed on the street, due to high stability of the material to changeable weather conditions and to contact with chemical reagents.

Devices made of stainless steel, due to its high cost, are available only to the most authoritative industrial enterprises. However, along with the price, operational indicators, for example, hygienic properties and operational terms, are also increased.

Classification of fatty films depending on the type of installation

Given the installation features, the following varieties of devices are distinguished:

Fatty soldiers installed under the sink;
Body fathers, under the installation of which a separate room is allocated;
Devices installed in the basement;
A separate type of instrument for fractional separation of fat and water is named devices that imply street installation.

There are no fundamental differences between the first three modifications. The difference is only in the performance indicators of the device, which is directly dependent on the number of equipment connected to it, such as bath, dishwasher and washing machines.

Installation of devices on the street of the prerogative of industrial enterprises. For these purposes, fattyllers made of fiberglass and stainless steel, which are resistant to adverse environmental factors, are used.

Operational parameters of fatty devices

The main parameters of household appliances for the separation of water and fats are power and productivity. The latter ranges from 0.1 l/s - 2 l/s and determines the amount of water cleaned per unit of time.

The method of cleaning the fat interpreters is an important indicator characterizing the features of the operation of the devices. Distinguish:

Fatty men that imply manual cleaning and related to the class of the most popular household appliances. Their cleaning is performed manually and is carried out using improvised cleaning products. Devices of this type are characterized by small throughput;

Fatty soldiers, in the process of cleaning which specialized pumps are used. Often, such devices have a set of automated functions that promptly report the need to carry out preventive work. However, only industrial fat interpreters have similar functionality, and devices that imply street installation.

Peak reset The main performance indicator

When choosing a suitable modification of the fatter, it is necessary to pay attention to the peak reset recognized by the main indicator of the performance of such devices.

Peak discharge volume of wastewater passing through the fat manner at a time.

The owners practicing washing the dishes by setting water into the sink, and its subsequent discharge should focus on the modifications of the fatty soldiers, capable of accepting a larger volume of water at a time, i.e., characterized by a large indicator of the peak discharge of fluid.

Assortment of the manufacturer Evo stock products to protect your sewer pipes

Having studied the assortment of the fat captures for the Evo Stok washing of the leading Russian manufacturer of the separators, you can easily choose a model characterized by the necessary peak fluid discharge. Evo Stock fatigue equipment includes all the necessary mounts and connecting elements that will be needed to install the device under the kitchen sink. Separate modifications are equipped with storage chambers, which serve as a kind of collectors for household waste of fatty nature. The products of the Russian manufacturer in the manufacturing process use layered polypropylene, characterized by anti -corrosion stability.

Installation of a fatty man with your own hands

Before installing a fatty girl under a sink with your own hands, it is necessary to carefully measure the space, where the fatter will be placed subsequently. Since often they prefer to close the space under the sink using cabinets and other furniture structures, it is necessary to take into account the fact that for optimal operation of the fatter and furniture structures, the space should be preserved up to 2-3 cm, which will provide unhindered access to the device during its preventive maintenance .

The surface on which the fatter will be installed should be devoid of all flaws and irregularities, which can contribute to the undesirable inclination of the fatlite, which reduces the indicators of its effectiveness, as well as overflow fat waste over the edge of the sump.
In the process of installation, it is also necessary to follow the fire safety rules that prohibit the installation of devices near easily igniting equipment.

All information regarding the installation of a fat -down device is contained in the accompanying instruction that is attached to the equipment you purchased. It sets out the process of work in detail, observing which, you can easily cope with the installation of a separator. Fitings, fasteners, as well as all the necessary equipment in most cases are included in the kit, but there are exceptions when it has to be purchased separately.

Having installed the device, it is necessary to test the finished design, which to identify the places of potential leaks. Most often, these are unreliable joints in the places of accession of the fat manner to the sink and sewer system. In this regard, the use of silicone lubrication and sealing tapes that increase the efficiency of sealing joints is welcome.

Site search