How to paint the pipe: choice of paint, work technology for each type of pipes

Piping pipes requires a thorough choice of products and solutions for work. Painting of iron, plastic, sewer pipes differs in technology for applying and choosing paint. In the article, we consider the processing of hot pipes and the technology of work, which consists in the preparation of materials and tools, as well as in the sequence of stages of coloring.

Table of contents:

1. Reasons for pipe painting
2. Choice for pipes
3. Painting of iron pipes
4. Coloring hot surfaces
5. Black pipes painting technology
6. How to process a sewer pipe
7. Materials and tools
8. The sequence of work

Reasons for pipe painting

The communication system of the house is in the network of sewer, heating, water pipes. Over time, the surface of wired parts can succumb to corrosion, rust and the like. To avoid negative moments, you should professionally solve the question: how to paint the pipe? It is important to pay attention to the type of repair object, its surface and stage of damage.

To the question: how to paint pipes? It is necessary to approach the solution from different aspects of the type, color and material of pipes. The consistent technology of work is the selection of colorful means, the preparation of the surface and applying the solution to different types of pipes. Performing a step -by -step instruction will provide you with high -quality and professional coloring.

The application of the paint with a small layer to the surface of the pipe serves as a protective agent from corrosion and damage to the pipe from various exposure. Using various kinds of paints, you can perfectly complement the interior of the room with the necessary shade that would not distinguish the battery from the color of the walls and so on. The material from which the pipes are made does not matter, because in any case, it is important to take care of them and cover with paint in order to avoid rust or rot.

Experts distinguish a number of reasons because of which the pipes must be painted:

1. The previous layer of colorful material began to fall off and disappear, as well as succumb to rust.

2. When establishing new pipes, it is recommended to treat them with corrosion protection.

3. In the bedroom, living room or kitchen, it is important to paint the pipes so that they merge with the general interior of the room, and not stand out.

4. Preventive measures to avoid damage to water pipes, heating or sewer.

Choice for pipes

Before starting work, you should decide on the choice of colorful materials used for restoration. For external pipes, a lead sword will be a suitable option, which contributes to the oxidation of the upper layer of metal, forming a mask of lead and iron around the surface. Such properties of paint helps to avoid the influence of the external environment, in particular water.

To approach the choice of paint more carefully, we recommend that you consider the following types of funds:

1. Alkyd enamel is a means resistant to high temperature conditions. Some funds can withstand up to 1000 Celsius. These properties also relate to sharp temperature differences from -40 to +50 degrees, while the owners may not worry about the quality of the painted surface.

2. The waterpower paint is a harmless tool, and the main properties are the strength of the applied solution and the speed of drying. The service life of the pipe after applying the paint is measured by many years. When choosing a paint, it is recommended to choose the form accordingly for painting hot and cold surfaces.

3. Acrylic enamel after painting forms a glossy type of pipes. The paint is made of natural solvents. Color shades of paint will remain the same for many years, since the base does not burn out from ultraviolet rays. Before applying enamel, the surface should be thoroughly primed.

4. Oil paints can be applied to any type of pipes, but over time, the surface will turn yellow or change color.

How to paint a metal rusty pipe to avoid corrosion and the effect of water, chemicals? The best solution will be the acquisition of an enamel group. The paint dries throughout the day, and then forms a film that is resistant to exposure on the surface. This remedy is not amenable to damage at high and low temperature conditions. The enamel coating is saved on average for 7 years. By processing the surface, several layers can be forgotten for several years about painting the pipe.

How to paint plastic pipes in a room where the surface of the product cannot be directed by the environment. For such work, means of other component composition with individual chemical parameters are recommended. As a rule, water -based or oil paint is used for internal work. In emulsion solutions, the smell is completely absent, because when breeding the product, water is used.

Painting of iron pipes

Before starting work, prepare all the necessary materials and objects, as well as inspect the working surface. The paint for heating pipes differs from others, because the temperature regime matters for processing.

The work will require colorful products, brush, gloves, a rag, a grinding skin for surface treatment, a primer and dough. The old paint is removed, and the pipe is polished using a skin to form a flat workspace. The upper part of the pipe is recommended to degrease, and all the garbage is removed from the room. After the preparatory procedure, you can start painting pipes.

Coloring hot surfaces

Many are interested in the question: how to paint heating pipes using a special technology or in a certain way? The work, in this case, is not difficult, because ordinary oil paint is used for processing. Its property consists in transferring high temperatures up to 250 or 300 degrees Celsius.

A special crust is formed on the outer surface of the pipe, which cannot be exposed to different factors. The life of the pipe after painting can be about 15 years, but the colors are not advised to choose too bright, because over time they fade.

Black pipes painting technology

A problematic option is painting cast iron and steel pipes, which are most often corrosion. Before starting work, it is necessary to carry out cleaning work to remove all dust and dirt. It is important that the surface of the pipe is dry before painting.

The paint for gas pipes made of cast iron and began to choose from an enameled group. As a rule, the drug should own anti -corrosion properties, have a rust converter, and enamel should have a high degree of protection against damage. It is recommended to carry out colorful work in two stages of applying layers.

How to process a sewer pipe

How to paint a profile pipe if it is made of plastic. As a rule, such pipes do not need additional care and painting. Only a metal line in sewer communication can be given processing. To correctly determine the paint for plastic products, you need to read the properties of the pipe, and with the help of a specialist, choose the necessary remedy for painting.

If you need to paint the pipes in the toilet or in the basement of metal, then the process of preparing the surface will be somewhat difficult, since not all sides of the subject are visible. Masters advise using a hair dryer that will quickly dry the surface and remove all the dust from the pipe. When choosing paint, pay attention to the products for rooms with high humidity and so on.

Work technology:

First of all, it is important to understand the amount of paint necessary for processing the pipeline. To facilitate the calculation process, we recommend applying the following knowledge.

• more funds are spent in hard -to -reach places;
• the first layer of processing is needed more paint, because the surface absorbs the solution;
• less paint will be needed for even pipes than on rough;
• hot pipes dry much faster than cold.

Pipe with free access is easier to process, which relates to batteries and risers. It is important to immediately color all the areas and not leave the free surface, and you need to approach the application of the next layer after the first dries. The peculiarity of painting plastic pipes is that before work they are washed with warm water and waiting for the surface to dry.

Ways to stain the surface of the pipes from specialists:

• applying the paint over the old layer, but at the same time it is worth examining the pipes for the presence of cracks, bulges and damage, which should not be;
• painting of the pipe with the previous removal of the old layer. For this, the surface is completely cleaned, the rust is removed, and all irregularities or flaws are corrected using putty;
• if the old paint begins to fall off, it is important to separate it from the pipe and apply new layers.

Materials and tools

Before starting work, it is important to prepare all materials and tools, such as:

• a bucket with paint;
• brushes;
• painting tape and tray;
• priming;
• staircase when processing at a height;
• protective glasses as an additional object.

The sequence of work

The phased instruction of painting the chimney, as well as the heating, sewer according to the standard technology, is as follows:

1. Choose the necessary type of paint for processing a metal, plastic or other surface. Consider the temperature regime of pipes, especially for heating systems.

2. We clean the surface of the pipe from rust, dirt, dust, web, and also try to completely remove the previous layer of paint. We degrease the surface of the product.

3. Question: How to paint a gas pipe or tap, and is it important to apply a primer? The solution is that these works are optional. Many use soil to increase the duration of the pipeline.

4. If you used a primer, wait until the surface dries. After that, proceed to the painting of the pipe, for which prepare brushes of different sizes for access to difficult places.

Painting of pipes in the house is an important process, and therefore take into account the type of pipe, the material from which it is made, purpose and so on. It is advised to choose paint with the parameters and characteristics of the corresponding quality of the pipe and its location.