How to finish walls with clinker tiles with your own hands

Clinker tiles - ideal for wall decoration. This is due primarily to its strength, attractive appearance and good performance. The process of wall decoration with clinker tiles is technologically simple, however, in order to perform it efficiently, certain rules and subtleties must be observed. We will talk about how to put clinker tiles on the wall.

Content:

1. Clinker tiles cladding: features and advantages of the material
2. How to choose and buy clinker tiles of walls
3. Clinker tiles for interior wall decoration: Application in the interior
4. How to lay clinker tiles on the wall with your own hands
5. Clinker tile laying technology on the wall

Clinker tiles cladding: features and advantages of the material

Clinker tiles are widely used as a material for wall decoration both inside and outside the room. This is due to its advantages:

• stability before temperature fluctuations;
• moisture resistance;
• environmental safety;
• resistance to burnout and ultraviolet radiation;
• resistance before fire and flame distribution;
• ease of care;
• long service life.

Clinker tiles have universal use, with its help they perform the fireplace finish in the living room, kitchen, bathroom, hallway, etc. It is suitable for any microclimatic and climatic conditions, without losing the attractiveness of appearance and strength. This material is laid on any base, with the exception of drywall.

The advantages of the material are provided by the technology of its manufacture. Clinker tiles are made of clay, fired by high temperature. There are two options for tiles in the ratio with the technological process of its manufacture.

The first option implies drying the previously prepared material and its subsequent firing. According to the second method, the tile after forming it from the raw materials immediately lends itself to firing. Tile firing lasts up to 48 hours, while the temperature in the furnace exceeds 1100 degrees. The technology of production of clinker tiles provides the material with high strength.

How to choose and buy clinker tiles of walls

There are many options for clinker tiles that differ in appearance and operational characteristics. In relation to the last indicator, clinker tiles are divided into:

• technical - with its help I equip the roads and sidewalks, the tile has excellent strength and is distinguished by a long service life;
• moisture -resistant - used for decoration of the bathroom, kitchen, pool;
• standard - recommended for use for decoration of various walls;
• Tiles of various shapes, to create complex architectural solutions.

Clinker tiles differ in color, texture shape. There are a large number of its options suitable for one or another interior version. In most cases, natural dyes are used to create the color of the tiles, so the tile is characterized by environmental safety. Most often, tiles are produced in a red-brown or white-gray color.

There are tiles with a smooth and rough surface. The first option is similar to a noble brick, and the second with a natural stone. Using this material, not only wall decoration, but also floors, stairs, separate sections of the room are performed.

When choosing clinker tiles for the room, it is necessary to determine the area of \u200b\u200bthe finish in advance and, depending on this indicator, calculate the amount of material for work. The resulting value increases by about ten percent to compensate for waste and marriage.

In the process of choosing tiles, inspect the packaging by color, there should be no cardinal differences between them. When buying tiles, immediately purchase glue. Most often, the manufacturer is a list of glue, optimal for installing tiles.

Clinker tiles for interior wall decoration: Application in the interior

Clinker tiles are an excellent imitation of brick indoors. In order not to build masonry made of brick inside the room, it is enough to finish the walls in it with clinker tiles. Thus, firstly, it is possible to save space in the room, on the other hand, the load on the walls is reduced.

There are certain style predisposes according to which clinker tiles are used in the interior. We offer to familiarize themselves with them:

1. Elevator style - originated in industrial warehouses, where, due to a lack of material resources, no repairs were carried out and the decoration remained the same as before. This style is widely used in private houses or apartments and involves finishing at least one of the walls with brickwork, which clinker tiles perfectly imitate.
2. In the style of country - an obligatory attribute is the presence of a fireplace or furnace. In this case, their finish is also best performed by clinker tiles. In addition to its attractiveness, this material is able to withstand high temperature without losing aesthetic characteristics.
3. Gothic style - implies mandatory wall decoration with brick. This material goes well with large canopies above the bed, arches and large crystal chandeliers.
4. In a minimalist style, clinker tiles are designed to emphasize the urbanly dwelling. Its simplicity makes the room a little extravagant. It is preferable to use the tiles of light colors.
5. Despite the fact that in the style of Haytek, modernized technological equipment is used, the decoration of one wall or surface with clinker tiles, and gives the premises of harmony. Tiles complement glass and metal products well.
6. Stylistics Rustic implies the use of massive tiles for wall design. In addition, the surface of the clinker should be slightly aged. In the room, all walls are faced with tiles. Thus, it is possible to achieve the effect of dimming.

If the interior of the room is made in a classic style, then here tiles are most often used in the decoration of columns, massive structures. Tile wall decoration gives them charm, antiquity and nobility.

Finishing with clinker tiles photo:

There are several ways to use clinker tiles in the interior:

• The accentuation of attention on a certain wall - for example, the finish of the wall located next to the bed of clinker tiles, or the wall decoration with tiles under the brick in the living room, on this wall you can hang paintings or a series of portraits;
• the creation of a brick apron for the kitchen surface, the tile is easy to care and is not amenable to the effects of fungus and mold;
• If you decide to install an electric fireplace in the room, then the use of clinker tiles is an excellent option for its decoration;
• With the help of clinker tiles, it is possible to zone the space perfectly, dividing it into several functional parts.

How to lay clinker tiles on the wall with your own hands

Clinker tiles are laid on the base of concrete, reinforced concrete, brick, metal, wood. Plasterboard walls are not the best basis for installing tiles. Since the base should withstand certain loads from the material, which is not able to make drywall.

Before starting laying clinker tiles, you need to take care of leveling the surface, cleaning it from dirt, old finishing materials, paints. If the base is distinguished by the presence of dust, then before starting work I process it with a primer. In addition, in this way the level of moisture absorption is reduced by the base and its connection with a solution of glue, on which the tile is fixed, improves. Before the start of the masonry, make a marking according to which the whole tile will be in the center, and cut on the sides in a symmetrical position. For decoration of corner sites, a special corner tile is used. If partial decoration of the walls is performed, then the work should begin with the corner areas.

If during the purchase of tiles you purchased the material in various packages, then remove the tile from there and mix together. Thus, it will be possible to reduce the risk of sharp contrast or color difference during laying.

The tile is laid on the wall from the bottom up. At the same time, the glue solution is prepared in small portions, since the average time of its use is no more than half an hour. The time to change the position of the tile on the wall is 15 minutes no more.

To align the rows of clinker tiles, use the lace. The seams must be sealed after the glue dries completely, after two days from the moment of laying the finishing material. For these purposes, we recommend using special grouts, which are installed inside the seam with a rubber spatula.

Clinker tile laying technology on the wall

During the installation of clinker tiles, the presence of:

• clinker tiles, the amount of which is ten percent more than the necessary;
• special glue recommended by the manufacturer of tiles;
• two spatulas: with a smooth and gear structure;
• glass cutter, tile cutter or grinder - with their help the tile is cut;
• Crosses to observe the same interval between tiles.

Before starting the room, it is necessary to prepare the walls for laying the tiles. The base for clinker tiles should differ in evenness, strength, it should not have traces of the old finish. To check the wall for evenness, use the building level.

Please note that if there is a departed plaster on the walls, then before the start of laying it should be removed. In this case, plastering is carried out again. Before starting work, the walls are also covered with a primer penetration. This composition will not only protect the surface from the appearance of the fungus and mold, but also improve its adhesion with tiles.

Create a project according to which the tile will be located on the wall. Place its trimmed areas near the ceiling.

The next stage of work on the walls of clinker tiles involves the manufacture of an adhesive solution. As a glue, the adhesive composition is most often used, which is mixed with water in a certain consistency. Before breeding glue, carefully read the instructions and add water according to it. In order for the composition to acquire a homogeneous consistency, use a mixer nozzle.

The resulting mixture is infused at least 25 minutes, until all the components are completely dissolved. The adhesive composition is applied to an area of \u200b\u200bno more than one square meter. Since its adhesive properties are preserved for half an hour. If wall decoration is performed outside the room, then to fix the tiles, it is recommended to use the composition with severe fixation. Elastic glue with moisture resistant characteristics of medium fixation is suitable for interior wall decoration by clinker.

Clinker tiles for walls are fixed on the wall with glue. To apply the glue composition to the base, a special spatula with teeth is used. The tile is tightly crushed to the wall, for additional pressure, use a rubber hammer. Observe small gaps between neighboring tiles, in the future they will be closed with grout. To comply with the same gap, use plastic crosses.

Please note that if you have not managed to put the tile on the previously applied glue and it is already dried, it is necessary to remove it from the base and put a new portion of the adhesive composition. After two days from the date of the wall decoration, the joints are grouted between the tiles. If the grout accidentally hit the tile, then use the sponge to remove it.

Since clinker tiles are an imitation of brick, there are several ways to lay it. We offer to familiarize themselves with them:

1. Drilling of a spoon type - laying tiles of a boast, while it is possible to get uneven edges, in some cases this feature is an excellent effect for the decoration of the room, for example, under the old days.
2. Experts use varieties of spoonwork, observing it in the diagonal or horizontal direction. Despite the large number of scraps of the material, it is possible to get an amazing effect of wall decoration.
3. The use of chain dressing involves the formation of a block using two tiles interconnected. The method is quite simple, but is distinguished by the creation of interesting drawings.
4. Laying tiles in perpendicular to each other allows you to achieve masonry in the form of fish bone. The wall, in this case, looks extraordinary.
5. The masonry with intertwood bricks is used quite rarely, as it needs a thorough selection of materials for its implementation. In this case, between the tiles there are intervals, for the filling of which it is necessary to use the trimming of the material. In addition, they are filled with gravel, gravel or other small stones.

Clinker tiles are an ideal solution for wall decoration. This material is not afraid of moisture, temperature difference, has a long service life. The main rule for obtaining a qualitative result of laying tiles is to comply with the technology of its installation and the correct choice of glue for work.

Laying clinker tiles on the wall video: