Than is cheaper to finish the facade of the house

The question of what is cheaper to finish the facade of the house is relevant for almost all owners of private buildings. Indeed, on the one hand, I want the facing of housing to be high -quality and aesthetically attractive, and on the other, it is obvious that unjustified expenses in the pursuit of an exclusive and stunning appearance were useless. Those families that can afford any solution without looking back at its cost are rare.

But to fall into the extreme, stopping on the most budget option, without an objective assessment of the ability of the selected material to resist the aggressive street environment, rain, frost, snow, etc., is definitely not worth it. Unless, you want to make sure that the proverb says in the effectiveness of the saying twice.

Of course, it will not work to finish the facade of the house cheaply, but it is quite possible to choose the optimal material that, ceteris paribus, will have a lower price.

Table of contents

1. Criteria of competent choice
2. Popular options for the exterior decoration of the house
   1. Siding a good choice or not?
   2. Advantages and disadvantages of plaster
   3. Features of the block house
   4. Facing brick quality and durability
   5. Facade tiles: pros and cons of
3. How to finish the facade of the house cheap: video, tips and recommendations

Criteria of competent choice

To decide what is better to finish the facade of the house and at the same time not financially to lose, it is very important to clearly determine the criteria that contribute to the identification of the advantages and disadvantages of a particular option.

First of all, it is worth paying attention to the appearance of the already finished facade. Of course, the presentability of the cladding is a very, very subjective concept, directly depending on the personal tastes of the owners. However, such parameters of the materials used as:

• the number of offered color variations and textures,
• resistance to fading and the occurrence of other visual defects,
• similarity with natural raw materials (if an imitation product is considered)

it is impossible to leave unattended in any case. They will help to make an objective impression of the product.

The next quite obvious criterion is the durability of the material. You must admit that it will be very sad if an inexpensive facade of the house turns out to be a real headache with the need for annual reinnovatory works. If you like the type you like, know a good service life, you are on the right track.

It is no secret that facade material is not enough just to choose. It is also necessary to install it. The complexity of the task, the presence of seasonal restrictions, the volume of auxiliary elements and materials all these factors must be taken into account.

And finally, the final cost of external cladding. This should be included:

• the cost of material per kilogram or square meter;
• the price of components, tinting, necessary equipment;
• the cost of installation (as well as, if necessary, and preparatory work).

Other things being equal, you can safely navigate when choosing precisely on the final cost of the facade.

Popular options for the exterior decoration of the house

Most often, owners of private houses prefer facade facing facing:

• siding;
• facade plaster;
• block house;
• facing brick ceramic or clinker;
• facade tiles.

Siding a good choice or not?

The main types of siding used for facing facades of houses are vinyl and basement. Aluminum in residential construction is used extremely rarely. Key advantages of the material safety, relative ease of installation, minor care.

And the most obvious drawback is an artificial appearance. And, we can say that this fact practically crosses out all the advantages. In Europe, for example, siding is addressed exclusively if necessary to clarify household or temporary buildings. And although basement siding, unlike vinyl, imitates a natural brick or stone, it still blows with plasticness.

As for the service life, siding manufacturers assure that their brainchilds are able to serve faithfully for 40-50 years. But in practice, this figure is usually much smaller, since the material is fragile with severe frosts, unstable to deformation, is prone to burnout. Cases when after 5 years of operation it is sad to look at siding, unfortunately, are not rare.

When installing siding in the cold season, it should be borne in mind that the material has a high indicator of thermal expansion.

average cost

Vinyl siding will cost you about 200 rubles/sq. m. The final cost of such a cladding, taking into account the installation and the necessary auxiliary elements, is about 1,500 rubles/sq.m.

Called siding is more expensive. The material itself costs an average of 400-500 rubles/sq.m. The actual cost of decoration of the house is 3000 rubles/sq.m.

Advantages and disadvantages of plaster

Plaster coating capable of providing the facade decent appearance; moisture resistant, breathing. Depending on the link, facade plasters are:

• mineral (base - cement);
• acrylic (the basis of acrylic resins);
• silicate (base of liquid glass);
• silicone (base silicone resins).

The variety of textures and colors in this material is very limited. In the predominant majority of cases, such a cladding must be additionally painted. And the texture can usually be selected either rough or rustic.

The service life of the facade, decorated with plaster 7-10 years. And although over time the plaster becomes stronger, it is not a stand for mechanical damage.

Subtleties of installation

To finish with facade plaster a house with an area of \u200b\u200b150-200 square meters requires 6-8 weeks. Previously, it is necessary to primer surfaces. Wet processes make the installation of facade plaster very dependent on weather conditions and season.

Note! The low vapor permeability of acrylic plaster makes it impossible to use it in tandem with such insulation as mineral wool.

For the gas -lane base, exclusively mineral plaster is suitable.

average cost

1. Mineral plaster. The cost of the material is about 40 rubles/kg. The consumption of plaster per square meter is 3 kg. The total cost per square meter, taking into account the installation payment and all the necessary materials 2000-2200 rubles.
2. Acrylic plaster. The cost of the material is 50 rubles/kg. Consumption 1.5 kg/sq.m. The total cost is 2500.
3. Silicate plaster. The cost of the material is 100 rubles/kg. Consumption 2.5 kg/sq.m. The total cost is 2800.
4. Silicone plaster. The cost of the material is 100 rubles/kg. Consumption 3 kg/sq.m. The total cost is 3000.

Features of the block house

Block house subspecies of the lining, with its surface, imitating a looped log. This material is natural and environmentally friendly, but quite expensive and short-lived. Not fire. From the flaws of appearance, knots, cracks, wormholes and other defects characteristic of wood are possible.

When buying a block house, you should make sure that it is not raw - otherwise there is a high risk that the material will rot.

Important! The block house, like any wooden surface located outdoors, needs periodic renewal of the coating with special protective compounds, etc.

average cost

The price of block house largely depends on the variety of wood. The cost per square meter can range from 400 to 1000 rubles (taking into account installation work and the necessary processing of 3000-4000 thousand)

Facing brick quality and durability

Facial ceramic brick is an environmentally friendly material made of natural raw materials (clay), made using special technology. He is frost -resistant, durable, demonstrates low moisture absorption and good sound insulation. The facial clinker brick is produced just like ceramic, but is burnt at a higher temperature, so there are no voids left in it. Compared to ceramic, it has even better physical characteristics.

The facing brick has a wide range of textures, shapes and colors. With him, your facade does not risk foxing. The only possible external disadvantage to the appearance of heights.

The house, decorated with facial brick, will look luxurious for more than one decade. Clinker brick sample of durability, it is able to withstand more than 150 cycles of freezing-tangling.

The cladding of the structure with a brick should be taken into account at the stage of its design (the material is laid on the main foundation). Otherwise, additional strengthening of the foundation will be required.

average cost

The spread of prices for the material is quite large, but, of course, having the status of a leader in durability and quality, facing brick simply cannot be cheap. Professional brick laying is also very expensive. Therefore, the average Russian is not often chosen this option for decoration of the facade.

A square meter of ceramic brick will cost 1200-3000 rubles, clinker in 3600-4000. The square meter of the finished, beautiful and insulated brick facade in general will require up to 6,000 rubles.

Facade tiles: pros and cons of

Facade tiles modern and reliable building materials. Not afraid of moisture, strong, durable. With high -quality styling, it provides an excellent appearance of the house. The service life of the facade finished with ceramic tiles can be decades. True, much depends on the quality of the adhesive solution.

Installation of facade tiles is usually not easy. The process is accustomed to:

• the need for careful preliminary preparation of the surface;
• the complexity of achieving straightness of the seam;
• high fragility of the material before laying.

average cost

Facade tiles in comparison with brick demonstrates not the worst in quality and aesthetics the final result, but is much cheaper. The price of a square meter of material is 1000-1500 rubles, the actual cost of a square meter of such a cladding usually does not exceed 3,000.

How to finish the facade of the house cheap: video, tips and recommendations

Really inexpensive decoration of the facade of the house can only become if you produce it with your own hands. As you can see, some materials, at first glance, seem extremely cheap, but in practice, taking into account the cost of all auxiliary elements and the entire volume of work, it turns out that this is not so. And only if you decide to start this rather difficult work yourself can we talk about significant savings.

This video clip will introduce you to the rules for the installation of vinyl siding:

It is very important when choosing materials for facing cladding to objectively evaluate their perspective - how much they will last, how often they will need to care and update, what investments and how soon they can demand.

It will not be superfluous to look on the Internet at the photographs of various types of facades, to feel which style of performance you like. The appearance of the house should not only like it in love with it. It is proved that this moment directly affects psychological comfort from staying inside the housing or near it.

To understand how it is cheaper to finish the facade of the house of various cladding options is unlikely to help, but they will clearly contribute to the clear view of what awaits you when addressing a particular material.

Thoughtfully weighing all the nuances, we are sure that you can make the right decision that will be optimal for your family, both from a financial and aesthetic point of view.