DIY ANDULIN

Due to the widest assortment of materials for the arrangement of the roof that are proposed on the market today, many developers are asked when building the roof with the question of which material is better to choose. Instead of the previously popular roofing material and slate, corrugated board, tiles, roller and other well -known materials have been increasingly being used more and more often. Andulin is also gaining more and more popularity. Today we will consider what advantages the roof from Andilin possesses, and how to equip the Andulin roof with your own hands.

Content:

1. The characteristics of the Andulin roof
2. Varieties of the Andulin roof
   • Tiles from Andulin
   • Andulin slate
3. DIY roof device
   • Preparatory work
   • Arrangement of a crate for Andulin
   • Fastening of Andulin sheets
   • The final stage

The characteristics of the Andulin roof

Recently, modern roofing materials began to be replaced by the so -called Andulin, which has the highest reliability among them. In addition, Andulin is characterized by an attractive ratio of price-quality and is considered one of the most environmental roofing coatings.

This material for the roof consists of distilled bitumen, cellulose fibers, minerals, resins and pigments. When buying Andilin, it is recommended to operate with specific numbers, as they are needed to calculate the load of the material on the rafter system. Andulin has such standard parameters:

• The size of a typical sheet is 2000 by 950 millimeters;
• The thickness of the Andulin sheet is 3 millimeters;
• The wave height reaches 36 millimeters;
• The weight of the material reaches 6 kilograms.

Similar characteristics allow you to equip the Andulin roof without special tools, and due to the lightness of the material for building structures, there is no large load.

Next, you should consider different technical characteristics of the Andulin coating, which include the consumer to make their choice in favor of it, since they allow the use of the material in various climatic conditions. Andulin has such basic characteristics:

1. High -quality water protection. This result is achieved thanks to the chemical structure and wavy shape of the roof.
2. High stability. ANDULL PRESENTS to high and low temperatures. If the temperature on the street will change gradually, then such a roofing material will calmly endure the cold to minus 25 degrees, and significant heat.
3. The resistance of the occurrence of the fungus, the chemical effects of alkalis and acids, as well as ultraviolet study. According to the reviews of the Andulin roof, the properties are concentrated in this material, which should have truly high-quality roofs.
4. Resistance to the effects of different fuels and lubricants. It is worth noting that Andulin is not the most fire -resistant roof, but if it is reasonable to approach the installation and the future use of the material of ignition.
5. Small loads on the roof design. This is achieved due to the low weight of the material. The Andulin roof weighs no more than 3 kilograms per square meter. This means that working with him does not cause any problems.
6. Beautiful soundproofing properties. Similar characteristics allow the noise of rain in bad weather to make more quiet.
7. Anti -corrosion properties. Organic components of the material exclude the possibility of corrosion and rust, and Andulin bitumen impregnation makes it especially resistant to the decay process.
8. Strength and endurance. These properties are checked in everyday life according to the ability of the material to withstand large masses of snow in the winter. However, remember that Andulin becomes fragile in the cold, so experts advise making a more common crate in cold climatic zones than always.
9. Durability. As a rule, the useful life of Andulin reaches 50 years with a guarantee of the manufacturer about 15 years.
10. Multifunctional use. Andulin is used to cover the roof of new residential and non -residential houses and in partial repair. You can lay this material on top of the slate and other roofing coatings. A similar roof is also used when warming the balconies, because the light weight of the coating on the balcony structures does not create an additional load.
11. The low price of the Andulin roof, which is achievable with such a set of high characteristics. Good efficiency is achieved thanks to a combination of low cost and long -term operation.
12. Environmentally friendly material. If you delve into the chemical structure, then Andulin is an organic component saturated with bitumen. Pulp and synthetic resins are added to the material for the formation of the best properties. Despite the external resemblance to your favorite slate, the roof of Andulin does not contain asbestos and its all kinds of derivatives.
13. Wide colors. The colors of Andulin depend on the coloring pigments that are added in the manufacture. As a rule, the material of neutral tones is the most popular - red, brown, green and black. The surface of Andulin is matte.

Along with this Andulin coating, certain disadvantages are inherent, which are very insignificant. The color of the Andulin coating under the influence of rain, snow and sunlight can change slightly. The roof from Andulin contains a gap at the intersection of slopes, and it is customary to use profile polyethylene fillers to eliminate them.

Varieties of the Andulin roof

There are 2 types of roofs from Andulin Slavifer and tiles that have their distinguishing properties. These coatings are able to withstand such loads as strong gusts of wind, the speed of which reaches 180 kilometers per hour, abundant snowfalls, as a result of which there is an accumulation of significant masses of snow on the roof of the building.

Tiles from Andulin

ANDULINA tiles are a type of roofing material, in the manufacture of which soft tiles made of Andulin are used, which are an imitation of tiles and have a size of 100 by 35 centimeters and increased flexibility. The fiberglass or fiberglass, which is covered on both sides with a special modified oxidized bitumen, is based on.

The bitumen mass provides reliable gluing of the sheets with each other and at the same time increased water resistance. From below, the tiles are covered with a special protective film, which can be removed if necessary, as shown in the video about the Andulin roof. Top tiles are covered with the aim of protecting mineral crumbs, the color of which can vary to achieve perfect harmony with the color scheme of the site.

Soft Andulin tiles are often called gont or shingles, and it is customary to use it when erecting such a structure as a hip roof, which has many fractures and bends. The installation of tiles is carried out by fastening with special nails.

Due to the small size of Andulin tiles, the amount of waste when using the material is significantly reduced. A variety of appearance provides an opportunity to adapt the Andulin tiles for any construction style. The lower parts of the sheets can be made in the form of rectangles or polygons of various shapes, which introduces additional diversity into the design of the roof.

Andulin slate

The slate from Andulin is made in the form of wavy sheets, the dimensions of which are 200 by 100 centimeters. For the manufacture of this type of roof, bitumen-fibrous sheets are used, for the cross-section of which the slate profile is taken in order to increase their rigidity. Installation takes place very quickly and without any hinders.

A fairly large area of \u200b\u200bthe sheets allows you to use this material when covering roofs, which have a relatively simple design. More complex designs, as in the photo of Andulin roofs, are more often customary to cover with Andulin soft tiles, with the use of which the amount of waste is significantly reduced and the accuracy of styling increases, which leads to saving the material.

DIY roof device

The warranty period, which reaches 10 - 15 years, is applied to Andulin, and the actual service life of this material is about 25-50 years. ANDALIN ROOKS ATTENTION is inherent in higher resistance to temperature exposure and ease of installation, which is due to their insignificant weight. Andulin can also be laid on a previously laid roofing.

Preparatory work

A preliminary stage in the arrangement of a roof from Andulin is the installation of yends in places where the roof slopes are crossed. For laying Andulin enough hammer, hacksaw and pencil. Everything else is attached to a set of sheets. To independently equip the Andulin roof, prepare the following materials:

• andulin (to calculate the area, taking into account the overlap of the Andulin sheets for 1-2 ridges);
• wood for the crate (beam or boards);
• metal corners for connecting the frame under the roof;
• material for the chipper (metal tape from galvanizing, which has a width of 10-20 centimeters);
• mounting foam or sealant;
• fasteners: hats for screws, screws, bolts, anchor.

Arrangement of a crate for Andulin

Under the roof, you should make a frame that is attached to the wall of the house in such a way that it does not lean on the glazing frames in any case. To correctly make a crate for the installation of a Andulin roof, you need to know its exact overall dimensions:

1. If the roof has a small slope of up to 10 degrees, then you need to make a continuous crate. Also, during installation, it must be borne in mind that at the end there should be a overlap of 30 centimeters, and 2 waves should be located on the sides.
2. If the angle of the roof is 10-15 degrees, you can make a crate with an interval of 45 centimeters. Webles are distributed in this way: 20 centimeters and 1 wave.
3. If the roof has a large slope angle above 15 degrees, then you need to increase the crate interval to 60 centimeters. On the sides of 1 wave, at the end the overlap is 17 centimeters.

The assembly of the design of the frame for the Andulin roof occurs in such a sequence. Cut the required corners length with a grinder, make cuts to be stuck in a triangular structure, collect and fasten the brackets of the frame. Remember that between the frame brackets the distance should be the smaller, the more expected more loads on the roof, but not less than 70 centimeters.

Scroll through the elements of the crate, drilling holes for screws for this at the place of passage of the crate. Buy the chipper around the walls of the roof perimeter. After that, lay on the crate of Permamin. After the completion of these works, you can proceed directly to the installation of Andulin sheets. If the slope of the roof is low, it is recommended to lay an additional lining carpet under Andulin tiles.

Under the action of multidirectional loads on the roof (snow pressure, wind), it is more advisable to use a bolt compound of the elements of the crate than to arrange a welded structure. When replacing the old slate roof with a new coating from Andulin, there is no need to re -build a crate, and it is enough to simply lay Andulin sheets on the existing one.

Fastening of Andulin sheets

You must strictly follow when installing the Andulin roof instructions for using this material. Work must be carried out at a temperature above minus 5 degrees, it is desirable - only at a plus temperature (not more than 30), because with negative indicators the material becomes tougher. Experts advise when laying Andulin between roofing waves not to walk, but to put a leg on the crest.

The installation process of the Andulin roof occurs in such a sequence. The sheets of Andulin are sawed and adjusted according to the required format using a hacksaw. Remember that the hacksaw will be better to cut Andulin if you pre -lubricate it. Installation is carried out in a checkerboard pattern. Andulin is laid on the leeward side, each even row should begin with half of the sheet, so that at the junction there is a overlap of not four, but of three sheets, which greatly facilitates the installation process.

Fastening of Andulin sheets to the crate is made in places of overlap of material and at the end of the wave. Fasteners need to be carried out, clearly adhering to the line of the beam. You can pull the rope so as not to make a mistake. It is necessary to fix the sheets only after their thorough leveling, because it will not work to dismantle the sheet in case of error without damage, you will have to use a new element of the roof.

It is necessary to nail the sheets on both sides: the middle of the sheet is clogged with a step in one wave. Fasten the Andulin roof with the help of special nails that have a protective cap and necessarily require the presence of a seal. At least 20 nails are spent on each sheet to prevent damage to the coating with impulsive wind. The length of the cornice overhang should be limited to 5 centimeters.

Next, it is necessary to fit the sheets of Andulin to local sizes and place them on the crate. The material, as the laying, must be attached to the chipper side and lower edges at a level of 10-15 centimeters from the glazing frame. Remember the ramp! When forming gaps between alline sheets and ridge elements, a special aggregate must be used.

The final stage

On the upper edge of the chipper, it is necessary to perform external sealing and, if required, the sealing of all screws for the installation of Andulin, as shown in the video about the Andulin roof with your own hands. Internal sealing is made around the perimeter and seams of the roof, for example, with a mounting foam. The natural light of the attic is easy to obtain by arranging a roofing window and attaching it to the joints with sheets of nails.

To ensure a fan covering with ventilation, you can use a special fan for the roof, which is fixed according to the same principle as the roofing windows. The ventilation pipe is installed with its mandatory fastening to all the joints of sheets of roofing material. The upper sheet is overlapping the base of the pipe.

Upon completion of the work, drainage gutter, skates and ventilation combs are installed. The skate elements are customary to be attached with an overlap of 12.5 centimeters. When working, it is worth adhering to the requirements of the fasteners of each wave, which joins the timber. The work is carried out primarily on the side of the Andulin roof, on which there is no wind.

Remember that the roof from Andulin does not require special care, but to extend the life of the roof, it is recommended to be cleaned in a timely manner of pollution by branches and leaves. When losing color, you can paint the roof from the spray can, choosing a suitable color.