How to install a two -level stretch ceiling

Time in place is not worth it, technology and science too. Yes, the engineering brethren invents something. With the advent of polyvinyl chloride films in the hands of designers, there was a material that provides a wide field of activity and allows all developments to be realized. In principle, this effect in the design of the ceilings cannot be achieved by other materials. The installation technology of a two -level stretch ceiling is not so complicated. It will take everything about 3-4 hours. In addition, you will be pleased with the lack of putty, solutions, paints and building debris.

Content:

1. Features of two -level stretch ceilings
2. Sketch of a two -level stretch ceiling
3. Technical requirements for the installation of a two -level structure
4. Installation of a frame for a two -level ceiling
5. Ways to fasten the stretch fabric

Features of two -level stretch ceilings

A modern stretch ceiling is a canvas made of polyvinyl chloride film, which is attached to the profile for the frame. After installation, the canvas acquires a smooth and even surface without the formation of any seams. Although the panel actually consists of several paintings firmly connected by welding.

The installation of suspended ceilings, single -level and even two -level, is the most aesthetic and convenient type of decoration. Such ceilings look especially beautiful in large rooms with high walls. As a panel, tissue material or vinyl film is used, and the surface of the ceiling can have a different glossy or matte structure.

Take the advantages of this type of finish:

• Getting a flat surface of the ceiling with small labor costs. The ceiling in apartments is often uneven, has large changes in height. To get rid of this drawback in the traditional way, that is, using a plaster solution, you will need a lot of effort and time. Labor costs for obtaining a flat surface when using the technology of stretch ceilings will be insignificant. In addition, stretch ceilings have such an undeniable advantage as the speed of installation.
• External attractiveness. It is unlikely that you can challenge the fact that this finish looks very beautiful. In addition, the assortment of stretch ceiling clocks is quite wide and diverse and you can choose a variety of options.
• Protection against water. Unfortunately, sometimes the accident occurs in apartment buildings, as a result of which the apartments, which are located on the riser below, are flooded. But when installing two -level stretch ceilings with your own hands, you can not worry about the safety of your repair. Walls will simply not miss the water. To eliminate the accident, it will only be necessary to release water, and the sagging of the panel is eliminated using a heat gun.

Of course, the stretch ceiling has its own disadvantages:

• The relative fragility of the panel. If you touch the coating with some sharp object, a scratch or puncture will occur on its surface.
• PVC film cloths should not be installed in the suburban buildings of seasonal residence, which are not heated in the winter, since the film will be destroyed under the influence of low temperature. However, in this case, you can use fabric panels that perfectly withstand low temperatures, so for the finish of unheated buildings it is necessary to choose this particular option.
• High price. Stretch ceilings will cost you not cheap, especially two -level ones. But the high price of two -level stretch ceilings with more than compensated by their long period of useful operation. And in order not to pay the installers for installing the canvas, you can do all the work with your own hands.

Sketch of a two -level stretch ceiling

It is stretch ceilings that are most suitable for complex two -level ceilings, which have an unusual configuration. Since the PVC film is plastic and flexible, it allows you to easily realize any design plan.

When developing a project of a two -level stretch ceiling, several points should be taken into account: the desired aesthetic result and functional expediency. Using a two -level structure, you can hide any irregularities of ceiling floors and effectively equip lighting. Do not discount the possibility of zoning space. For this, combining different textures, colors and shapes of the stretch canvas is used, which not only divides the room into separate zones, but also optically increases it.

The choice of color combinations and shapes when arranging a two -level stretch ceiling must be determined by the general concept of the interior. So, in rooms with a laconic color solution and planning, the interior will be unnecessary to arrange a ceiling structure of a complex shape with bizarre curls, much brighter than other interior elements for color combination.

Regarding two -level stretch ceilings with photo printing, it is necessary to say the following. Undoubtedly, such effects look spectacular and unusual in essence. But too much focusing on the ceiling surface (unusual shape, and even a bright pattern) is justified exclusively in spacious rooms with high ceilings.

But if you decide to take this step, you need to take into account the property of the glossy panel glitter and reflect the surface. Images with the effects of the starry sky, patterns and optical fiber are usually built into the lower level of the stretch panel.

Technical requirements for the installation of a two -level structure

The main elements of the two -level system are: a plastic or aluminum baguette of a parcel, ceiling or connecting type, which is required to attach the film directly to the ceiling or box; a canvas, which consists of several pieces of film, which is soldered with each other, and is bordered by a flexible harpoon around the perimeter; A decorative insert that closes the mounting gap of 4 millimeters between the wall and the canvas.

As a rule, the installation of two -level stretch ceilings is carried out at the very last stage of the repair, when all dusty work is completely completed. The following requirements are put forward to the installation procedure:

• It is customary to install the profile on concrete, brick, drywall, wood, aluminum, tile or plaster. It is impossible to allow the coverage of the old ceiling to crumble - it must first be cleaned and primed.
• Installation of a two -level stretch ceiling can be done in a room with furniture sets, household appliances and other interior items. But remember that the distance to the new ceiling from the top of the cabinet near the wall should be more than 70 centimeters.
• Before starting work, it is recommended to develop a circuit of electrical wiring and communications in places where the stretch fabric will be installed.
• A high -quality installation of a two -level stretch ceiling is possible only with a certain heat equipment mode, which is built into a new ceiling: the devices should heat a little. The same applies to ventilation, spotlights, climatic equipment, alarm and fire extinguishing systems.

Installation of a frame for a two -level ceiling

Before making a two -level stretch ceiling, it is necessary to make a frame of metal profiles, which is intended for drywall structures. The plane of the structure should be strictly horizontal. Using a laser or water level, you need to indicate the marks in every corner of the room. A continuous line is drawn from these marks using a recitting cord around the perimeter of the room.

At the designated line, attach the U-shaped profile using a perforator and dowels. The same profile must be installed on the ceiling according to the pre -laid marking. The shape of the box is straight and curved. To fix the profile along the curve line, it must be cut with scissors on the metal, adhering to the interval of 3-4 centimeters, in such a way that you can bend it to the necessary curvature.

Attach the icages made from the profile segments to the ceiling fixed to the ceiling. The lower edge of the Owl should be with a wall profile at one horizontal level. Together, they will form the lower plane of the entire two -level structure. The mounting interval is 25-30 centimeters.

From two segments of the profile and U-shaped profiles, collect the box, twisting metal screws so that it turns out to be a design that looks like a rectangular pipe. This design must be attached to pre -established drops. Perform all the fasteners on the profile of type with a clopic using a screwdriver.

Attach the installed box to the wall profile with a wide supporting profile. Strict correspondence of horizontals and verticals is required, you can check the angles using the level. In this way, collect the entire frame around the perimeter of the room. Subsequently, fasten the baguette for the stretch fabric to the box. When cooling, the suspended ceiling film will be strongly pulled, so the design of the box should differ in high strength, designed for the load and withstanding the tension of the PVC film.

The next stage in the installation of two -level stretch ceilings with your own hands is to lay the wiring necessary for arranging the backlight and lining the frame with drywall. Cut the sheets of the required size and install on the box, fixing the drywall through the drywall. After installing all the elements, it is necessary to strengthen the corners with the help of a perforated corner, which is customary to fix it on a gypsum putty.

All recesses from self -tapping screws and seams must also be thrown. The box after solidifying the putty must be sanded with a special grinding grater. Mark the location of the built -in lamps and drill holes using the appropriate nozzle crown, then grind the surface of the box and pushes the wallpaper, or apply the paint. In this way, the ceiling of the lower level is performed. Installation of a stretch ceiling performed is much easier.

Ways to fasten the stretch fabric

So, the installation of stretch paintings requires the presence of such equipment and tools: a perforator for fixing guide profiles to the walls, a heat gun with a gas cylinder for heating the panel and its installation, a screwdriver, the level for creating marking (it is best to use laser, but if this is not, then there is no, then You can also hydraulic), a stepladder for convenient work on heights, spatulas and special shoulder blades for pulling and fixing the PVC film.

The tensioning blade itself must be attached to the installed fabric, harpoons or wedge method. The most common installation method is the harpoon: at the edges of the film, a special hook is welded on the harpoon machine, which is needed to attach the profile and pulling the canvas.

The ceiling, equipped using this technology, can be easily dismantled and installed again in place during repair or flooding, in contrast to the graduate and wedge. At the same time, it is recommended that the canvas be sorted in a special way and very accurately: the optimal solution, if it is less than 7% of the area of \u200b\u200bthe covered ceiling, as shown in the video about the installation of a two-level stretch ceiling.

The wedge method involves fastening of the canvas, which has a larger size of the ceiling, so the film is thoroughly measured and excess material is cut off after stretching. A graduate method is similar to wedge. However, the film must be attached to the profile using a special tape, which provides excellent tension.

The advanced technology for installing a two -level stretch ceiling needs a mandatory drawing with a sizes. The canvas is cut out and sewn only after measurements of the room! Fixing the stretch ceiling to the plasterboard box or frame, it is necessary to ensure the reliability of the back of the baguette and the high density of the profile fit to the mounted two -level system. The type and duration of the new ceiling will depend on this.

Before installing a two -level stretch ceiling, the canvas is recommended to be heated with a hairdryer or heat gun to plus 60 degrees so that it becomes more elastic. When installing a similar design, the air temperature in the room should be at least plus 40 degrees Celsius. The film is attached first in one corner, fixed in the opposite and only then in the remaining corners. The last corner is attached to the most and hardest.

After that, the canvas must be fixed in profiles with a step of 8 centimeters: fix the film with a spatula throughout the baguette, evenly pulling it. Cut the remnants of the canvas if you have chosen wedge or graduate technology. Spread all the stripes and folds, heating the film with a building hairdryer. When cooling the room to the usual temperature, it will smooth out, and the ceiling surface will become perfectly even and smooth.

Flexible camouflage tape close the technological slot. Cut holes for lamps in the canvas. To protect it from warm lamps, paste the edge with a thermo -insulating ring. If the light is behind the stretch fabric, it will evenly illuminate the entire area. But the lamps do not touch the film.

As you can see, the technology for installing a stretch two -level ceiling in their home is available to everyone. In addition, such ceilings are functional, voluminous and elitist. With a small expenditure of time and effort, you will receive a magnificent arch above your head, which will close all the defects and bumps of the old ceiling. In addition, this design is not afraid of any water if your neighbors accidentally flood you from above.