How to dismantle a stretch ceiling. DIY STECTING CECRETION. Tool for dismantling the stretch ceiling

When planning their own home, many citizens prefer suspended ceilings, based on their choice on durability and strength of structures. However, it does not rarely happen that an unplanned analysis of the installation is required, the cause of which the most diverse factors can become. Is it possible to dismantle the stretch ceilings yourself, keeping them intact and with further use, how to correctly realize the specialists conceived without the help? Read more about this, as well as the types of ceiling organization, the features of the analysis and the tools necessary for work, then in the article.

Table of contents:

1. In what cases may be the dismantling of a stretch ceiling
2. Types of stretch ceiling
3. List of necessary tools for dismantling
4. How to prepare workspace
5. Features of pvc structures analysis
6. How to remove seamless tissue structures correctly

In what cases may be the dismantling of a stretch ceiling

Before delving into the subject of analysis, it is necessary to figure out what can cause a violation of the integrity of such aesthetically beautiful, strong attitudes that are designed for ten years of age. Among the many causes and factors, the following are usually distinguished:

• the neighbors flooded from above;
• gaps appeared in the coating;
• hidden communications began to junk;
• the premises requires repair or reconstruction;
• the hosts decided to change the print print.

Since such a plan, the organization of a high -quality interior and exterior of the room costs a lot of money, the owners often turn to the work not on a personal initiative, but under forced circumstances.

Types of stretch ceiling

It will not be possible to unequivocally answer the question of how to dismantle the stretch ceiling with your own hands, but all due to the fact that each type of specialized equipment must be approached from a different angle, because the features of its liquidation are followed depending on the mount and materials of the design. Read more about the varieties of the ceiling coating in the table.

Not in all cases, to get to the inter -ground space, it is necessary to remove the coating completely, sometimes in order to perform the necessary operation, it is enough to remove the lighting items, which actually begins any dismantling. If we talk about the harpoon mount, which is created by masters in the factory, it is worth noting that the assembly and disassembly of such systems are quite simple. The structures are installed in the room according to pre -removed measurements, on the principle of soldering the canvas around the perimeter. The peculiarity of the elimination of the device is to use stupid metal plastic, which remove the decorative insert of plastic, putting the tool in the profile.

How to dismantle a stretch ceiling without damage is it possible? In cases where the master of their craft is present on the work site, the material used in almost all cases is extracted in integrity and can be re -applied in practice. If the seizure of the system is carried out by beginners, then they must understand that the wedge and fist mount are the presence of clamps that make the film deform, which means when the structure is eliminated the holes in the canvas may appear. In most cases, in the process of dismantling with your own hands, canvases remained whole, to which harpoon fixation of the material was applied.

List of necessary tools for dismantling

The ceiling stretch ceiling and its installation costs the owners quite expensive, so it is rational to entrust the analysis of the structure to those people who understand the smallest nuances. However, if for some reason the owners cannot allow the master’s call to the house, they should carefully prepare for the upcoming process, which will be performed with his own hand. In order for no hills in the work, the beginner needs to prepare the working equipment. The list of mandatory tools includes:

• An ordinary spatula, which is used for plaster at construction facilities. It is better if the subject has an average size, you should not use too wide. Before work, the sharp corners of the tool are grind. Also, the risk of damage to the canvas can be reduced if the blade is additionally treated with reinforced tape.
• Pla -rodbones will need elongated lips.
• Knife.
• For convenient contact with the ceiling system, you will need either a stable table or a stepladder.
• Thermal unit is an electric, gas or heat gun. For some, special electrical wiring is needed.

It is worth noting that the list of tools may vary, depending on the characteristics of the canvas used by the method of fixing it.

How to prepare workspace

Removing the canvas in the room should not prevent anything, therefore, before making any implementation in the installation, you need to prepare the room. First of all, any equipment and electrical appliances that are available at the object of work are carried out. This is due to the fact that high temperatures tend to adversely affect their functionality. Also, aquariums, cells with animals do not leave in the room. As for the preparation of the highest compartment, before the start of dismantling, chandeliers, lamps and other decor elements are removed. If it is said about partial analysis, for example, in order to correct the breakdown in the electrical network, then partial seizure will be enough, in other cases, more global actions are required.

Features of pvc structures analysis

Since two types of material are used in practice, the liquidation process using various mounts has a number of differences. How to dismantle a stretch ceiling from a polyvinyl chloride film? Consider the working stages relative to each type of fastening of the decor mechanism.

1. The simplest and most uncomplicated way of the film is the one that is associated with the wedge mount. The success of the process directly depends on whether the initial installers left behind the groove of the material with a margin. The lack of material in the future can cause the unsuccessful use of the film in everyday life. In order to remove PVC, it is disconnected by the inserts of decorative, it is it that acts in the device with a wedge. After the pressure on the plug decreases, using the screwdriver, the plug is excised from the baguette, which means that raw materials can be freely elongated from the groove. In some places of deformation of the material, the location of the lamps, chandeliers usually become.

2. They begin to disassemble the mechanism with harpoon fixation from the corner, it is this method that allows you to use the resource in different rooms repeatedly, since the installation and liquidation process is quite simple. First of all, an insert of decor is removed from the mechanism. After the master will need pliers with elongated lips, they are used at the stage of pulling out the canvas for the harpoon. Here you should be especially attentive, since the harpoon itself, not PVC, can fall into the tool. If, by negligence, it is not the detail that is needed, you can ruin the resource and it will become unsuitable in the future. It is better to attract a friend to the process of a friend who would help maintain liquidation elements, in addition, the design of a stretch ceiling has a rather large weight. The material that is being excised from the system is recommended to be maintained with special clothespins, which are sold in various construction stores. With the help of pliers, only the initial part of the material is excised, it is worthwhile to grind the tool in order not to damage the film with sharp ends. Further analysis is carried out with the hands. Since to weaken the mechanism, you need to work the room to work in gloves, they are in contact with hot plastic.

3. Skik mount is neutralized like a harpoon, since some of the resource is originally released using tools, and further disassembly is carried out manually. Using the spatula, the owner needs to bend the profile of aluminum, which is necessary to free the headaces. After the staff is charged from the device using a screwdriver, a feature of which is the bent end. In the working process, it is worth concentrating not only on maintaining the integrity of the film, but also to avoid the deformation of the baguette. The installation of the system is characterized by a reverse sequence of actions.

Working with fist fixation, where a couple of screwdrivers are most often used, experts recommend taking care of security measures and pre -process the ends of the tool with tape.

How to remove seamless tissue structures correctly

How to dismantle a stretch ceiling from fabric? Such operations do not require the use of such high temperatures that are necessary for PVC, although the process of their elimination is quite similar. It is worth noting that the owners do not always manage to re -put used in practice, not because they were damaged during the seizure, but because the company and its employees performed the work poorly, filling the space without a fabric resource at least in a centimeter. The fact is that PVC has the ability to stretch, in tissue canvases there is no such property.

The main difference in the disassembly of the two systems that are reborn by the type of resource used is that in the case of tissue, you need to start the process not from the corner as in the first version, but from the middle of the wall, moving in the corner direction. It is also impossible to partially remove the decor if we are talking about clip baguettes. Such installations require complete removal. When eliminating cam products, a small graduate is used, wrapped in a protective layer.

It is important that with such advantage as the lack of the use of a heat gun, a large lack of design is distinguished, namely its large weight.

The masters who decided to independently remove the stretch ceiling should remember that if this procedure became necessary due to the fact that the neighbors poured the apartment on top, then before starting any fraud, it is necessary to de-energize the living room, and after starting to drain water.

Thus, we can say that if the owner of the house in which stretch ceilings are designed have a complete picture of the components of the structure, it can cope with its extraction on its own. However, before abandoning the help of specialists, you should think whether it has all the necessary tool base, as well as skills that will allow you to save the canvases in a condition suitable for further use. If the use of used systems is fundamental, then it is recommended to involve trained masters to the case, whose services will cost much cheaper than installing new materials.