How to paint a ceiling plinth

The color of the ceiling plinth is by no means the final chord in the repair, as is commonly believed. This work is recommended to be done before the finishing of the walls, so as not to stain the wallpaper. However, despite the procedure for the work, the issue of the need for painting of the molding is rhetorical. Painting of ceiling skirting boards is a necessary measure aimed at preventing the transmission, darkening and yellowing of their surface, as well as to obtain a certain shade of the Scabel. Therefore, let's find out what paint to paint the ceiling baseboard, and how to do it right.

Content:

1. The need to color the ceiling plinth
2. Selecting paint for a ceiling baguette
3. Preparation for staining a ceiling skirting board
4. Painting technology of ceiling plinths

The need to color the ceiling plinth

Ceiling fillets made of polystyrene, foam or polyurethane, which are most often used to hide the joint of the walls and ceiling, have white. If the ceiling in the room is also white, people often think whether it is necessary to paint a ceiling plinth. Let's figure out why it is recommended to paint the ceiling baguette:

• Bagets from the listed materials have quite often small dents and scratches, which will be noticeable in bright light.
• These materials are distinguished by a rather loose structure, a little shining through, and the paint can give them a more solid appearance and strength.
• Over time, the unpainted material from which the ceiling plinth is made can darken from dust or yellow. Therefore, the question arises whether it is necessary to paint the ceiling baseboard, and how to properly apply the coloring composition. It will be difficult to clean it, but painted moldings can be easily washed with a damp cloth.
• It is difficult to stick a skirting board without joints, and these gaps are very striking, especially in the corners. Therefore, before staining the ceiling plinth, the joints are accepted and it is customary to close, and the layer of paint hides the cracks under it.
• Wooden skirting boards also require painting, varnish or impregnation. This will make them more beautiful and prevent them from the invasion of insect pests.
• And finally, the baguette will have to be painted if you want it to receive a certain shade and acquire the tone of the ceiling or walls.

Now let's find out whether it is possible to paint the ceiling plinth if it is already attached to its place. Of course, it is easier or more convenient to engage in painting, when the baguette is not installed in place yet, you will not need to jump with a stepladder and be afraid for the already finished surfaces. However, in this case, you will still have to close up the educated joints. Therefore, it is customary to first install a ceiling plinth, and then paint it. So the result will turn out to be more solid.

Selecting paint for a ceiling baguette

It is very important to make the right choice which paint to paint the ceiling skirting board. Polyurethane and foam products are literally in front of the eyes dissolve from white spirit and other solvents, so it is recommended for them to choose exclusively water-based paints, water-dispersion, latex. Wooden baguettes are not so demanding on staining compositions.

If you still paint the baseboard first, and then attach it, you can buy a paint for a ceiling plinth in a spray can, so you can do the work very quickly, without fluxes and divorces. If you need a paint for a ceiling baguette of a certain shade, but it has not been possible to find it on sale, then you can purchase white paint for a ceiling plinth and stab it yourself or use such a service in any construction store.

If more serious requirements are put forward to the interior, and the final color and texture of the molding are of great importance, it is better to use Glaise for painting. Gles is a type of tinting substance, like a stain, which is used to paint products made of natural wood. Gles is sprayed to the surface, which is designed for painting, from a spray gun or spray, and rubbed with a rag, sponge or brush.

The use of Glazes allows you to give the surface of the molding almost any necessary texture of the tree, natural stone, gold or shabby metal:

1. Patina effect. To recreate the effect of the patina on ceiling skirting boards, it is customary to use Tair's Glaze. Apply it in an even layer to the surface of the baguette, leaving the middle part of the unpainted. Then, using a rag or sponge, blend the joints of an unpainted and painted parts and remove the upper layer of the substance. Such a technique will help to make convex surfaces brighter and brighter, and deep areas are more saturated and contrast. Further, with the help of the dark Glace Umbert, a relief layer should be distinguished and the effect of painting with a brush should be enhanced.
2. The effect of gilding. Before decorating the ceiling with a gilded skirting board, you need to take a thin brush and a Glaze silver, gold or metal. The brush should be dipped in a coloring solution, and then wiped to a almost dry state, as shown in the video about painting ceiling skirting boards. Then attach the bristly part to the relief surface of the baguette and slowly draw along it in such a way that gold remains exclusively on convex parts.
3. The effect of malachite. Before applying the paint to the ceiling skirting board, prepare a green glaze and a tampon of leather or leatherette. Gles needs to be applied to the surface of the skirting board and using a tampon to create veins on it. After that, it is necessary to paint with a pen with a light glaise, which is slightly diluted with water.
4. The effect of aged tree. A similar effect on molding is achieved by applying a brown glaise to it with a brush with hard bristles. Thanks to this, you can create a texture, outwardly very similar to a tree. A thin brush with a dark coloring composition can be finished with stripes of wood flaws and fibers, which are characteristic of wood arrays. This allows you to make the wood texture more believable.
5. The effect of dirty stone. This effect will be especially pronounced on ceiling cornices with an expressive and large embossed pattern. First, apply Glaze Tair, evenly. After that, you need to blend the paint with a brush to get light strokes. At the next stage, dark spots should be applied by the Umbert Glaze, after which the surface of the cornice is shaken. Further, with the help of a dark Gles, small strokes are made, regularly removing excess substance. After the strokes drying, apply the bronze glaise strokes, which is customary to apply to the relief contours of the skirting board.

Preparation for staining a ceiling skirting board

After you have chosen a coloring composition for applying to the baguette, you should prepare a ceiling plinth for painting and eliminate all defects on the ceiling surface. Prepare dishes with water in advance, a soft cloth or sponge so that you can wash your hands from drying glue or soak the already applied composition, as well as a small rubber spatula. Instead, you can use a flexible plastic or cardboard plate that does not damage the surface of the skirting board. Work on gloves.

When attach the last bar of the cornice, walk along it with any fine -grained finish putty or white silicone sealant to smooth out all the defects and bumps that appeared after the installation of the molding. For wooden baguits, it is better to use wood putty. Apply a putty to the spatula and soak the joint along the seam in the direction from top to bottom so that the level of levels is not visible.

Press the tool to the baguette tightly, but not much, trying to repeat all the bends of the profile. With the help of a damp sponge, remove the excess putty. It is more convenient to close the joints in the corners by typing a sealant or putty on the tip of the finger. It is recommended to work in gloves. If there are cracks between the plinth and the ceiling or wall, they should also be embedded. Wait for the complete drying of the substance and clean the irregularities of the surface with the smallest skin.

Painting technology of ceiling plinths

If you have already prepared a paint for molding, you should find out how to paint a ceiling skirting board with your own hands. Painting of ceiling skirting boards is a simple business that does not require special skills. But the technology of the coloring of the ceiling baseboard itself depends on what stage of the finish you decided to do this work. Before starting work, thoroughly clean the skirting board from dust and primed.

Before you paint the ceiling skirting board, cover the floor with paper or film so that the surface does not stain. If the walls are already trimmed, they must also be protected from paint. Regardless of the fact that you can easily erase fresh water -based paint with a damp cloth, the wallpaper can still be spoiled.

To do this, stick the masking tape along the baseboard, trying to prevent any open areas left. The adhesive tape should be glued close to the fillets, which will avoid the surface of the surface when painting a ceiling skirting board. You can remove the masking tape after the paint applied to the ceiling cornice dries.

If you are afraid to spoil the wallpaper with tape (the finish when rewinding can also move away from the wall or lose decorative spraying), then you should use a different method of how to paint the ceiling skirting board correctly. Take a clean wide spatula, a sheet of thin cardboard or plastic and attach it to the wall when painting the corresponding area.

In this case, the spatula must be applied close to the baguette from the side of the wall and stain the lower half of the protected place, then the spatula should be rearranged and painted the next section, and so on until the end of the ceiling cornice. When you paint the lower part of the baseboard, you can rearrange the spatula by pressing it to the upper part closely and in a similar way to paint the upper half.

For painting a ceiling baseboard, it is best to use a brush, since it will be difficult to paint a carved ceiling skirting board with a complex texture with a roller. Complex textures are easiest to color using a spray gun. At the same time, the paint will lie more uniformly and even, in contrast to the procedure for applying with a brush. But in any case, it is recommended to apply the paint with a thin layer and spread it well, otherwise the composition will be assembled into drops, flowing after you remove the spatula, on the wallpaper.

After you applied the first layer of paint, let it dry. If the places of joints are not visible through the paint, and you are satisfied with the result, then the painting of the ceiling skirting board can be considered the end. If the effect is not much to your liking, then repeat the procedure again. If you plan to paint the still unidentified baguette on the non -layered wall, then you can use both the paint from the spray can and the soft brush. But paints for external work must be avoided.

Knowing how to paint a ceiling plinth, you can do this work yourself without spending financial means and money to pay for hired labor. Once again, you should pay attention to the most important points that we described in the article, and you can safely get down to business. For example, to achieve a certain effect, whether it is aged tree or patina, it is worth using a special glaise instead of paint, and often not one. Also pay special attention to the preparation of the skirting board for painting and protecting the finish and furniture from the pack.