Equipment for cycle parquet. Features of choice and use

The surface of the floor is the most vulnerable place in any home. It is on this surface that the maximum load falls. No matter how high -quality the coating, over time, it becomes unusable or requires high -quality restoration. Parquet is considered a very popular and reliable flooring, but it also requires repair. For this, the floor cyclist is performed, this procedure requires special equipment and knowledge of the theoretical base on how to restore the flooring. Consider the features of this action, choice of equipment and operating rules.

What is the floor cycles

The cycle of the floor is the process of renewal of the surface, during which an insignificant layer is removed for further leveling and coating with special materials. Cycle is carried out only for a floor of wood. Part of the coating is removed using special equipment. As a result of cycling, the floor surface will again become even, beautiful, and applying a new layer of lacquer substance will significantly update the interior. The cyclist should be done very carefully if the tree of exotic species is on the floor and it is not known how it will behave. In the process of removing the worn layer, you can damage the coating. Conducting the cycle process is recommended using a cycling machine with sharp metal knives. They remove the top layer, paint, varnish or other coating.

The cyclime procedure is carried out in the following cases:

The surface of the floor was worn out, scuffs, scratches appeared, perhaps cracks from a large load on the floor and cross -country ability, legs, paws pass through the floor, and objects move. Such activity leads to wear of the upper layer. Recovery work using a cycles help to eliminate all defects.
Elimination of extraneous sounds that appear when moving on the floor.
Aligning and giving smoothness to freshly laid coating.

The cost of cycles

Not only construction companies, but also private workshops or craftsmen can cycle. This creates competition and allows you to choose a master. Prices in this case are different, which allows you to choose. But still, it is not the cost should be a decisive factor when choosing a master who will cycle the floor. It is necessary to start from skill, quality of work, recommendations and professional equipment that is used. When choosing, evaluate such aspects of the specialist:

cost of work, assessment of the state of the floor;
used tools for work;
the technology that will be used;
list of upcoming works.

The price requested by the master will depend on many factors:

states and wear of the coating:
the area of \u200b\u200bthe room where the floor is necessary;
a complex of services in the restoration process.

DIY parquet grinding machine

After the cyclisting tool is assembled, the machine is equipped, the room is freed from furniture, and the floor is cleaned of garbage, you can proceed to cycle. This process can be implemented using two options for machines:

drum;
disk flat -grinding.

The first type is most suitable for a room with a large area. Unfortunately, this equipment has its shortcomings:

uneven surface cycle;
the formation of uneven strips.

Even a professional is difficult to cycle with such an instrument at a high level. Some masters believe that drum tools are intended only for the first stage of cycle of removing the protective layer from the floor surface.

As for disk technology, this is a relatively new development in which there is no shortage of the previous row of equipment. The result of grinding the parquet with such a machine will be a perfectly even and smooth floor. After processing the floor, disk equipment is putting the floor and there is practically no need to modify it.

During the cycle of the floor with special equipment, the following stages of work are carried out:

the black cycle is removed the old varnish coating and the elimination of irregularities is carried out;
after re -processing, the current correction of defects on the surface, which remained after the technique;
putty of cracks, chips and minor irregularities;
applying a protective layer, experts recommend applying several layers.

How to choose a tool for cycles Parnish

Even with special equipment, handmade work will not be avoided. Inaccurate places, irregularities, narrow spaces, the cycle machine will not be able to get. Let's get acquainted with the list of tools, without which the floor cycle will not succeed:

a parquent grinding machine with a cycling function is expensive, but it can be rented;
manual corner machine for processing inaccessible places;
manual cycle Tool for cycle in places with difficult access;
roll of sandpaper with a coarse -grained surface;
wood putty to eliminate cracks in the floor surface;
parquet coating varnish.

After the room is ready, you can begin to cycle the floor.

Parquet cycle apparatus

The cost of equipment for the cycle of the floor is very high, depending on the main characteristics of the machine, it can range from one to two thousand dollars. Buying such a technique one twice is not entirely profitable. There are many offers for renting equipment. If the floor cycle is not your main lesson and not a source of income, then it is more advisable to take the device for rent. Payment for rented equipment takes place for daily. There is also a price range, but, as a rule, the average rental cost is about ten dollars.

You can also act relative to a grinding machine. It is necessary when carrying out the restoration work of the floor with your own hands, but buying it several times is also not profitable. The rent of grinding equipment is one and a half twice. Or the option is still such a purchase of a grinding machine with subsequent rental.

A car for cycling parquet boards and grinding equipment is necessary for restoration work on the floor.

Cycloping parquet yourself

Before carrying out cycles, it is necessary to carefully prepare the surface. The floor is carefully freed from dust, small particles of garbage. After that, using special equipment, you can cycle. When carrying out such work, work is necessary in soft socks. Shoes on the legs are not permissible, so it can scratch the surface and spoil the result of the work. Even slippers, as practice shows, are not suitable shoes for grinding the floor surface. In the process of grinding, the doors should be tightly closed, since a large amount of dust is released during the work. Small acute dust will form, which can cause irritation of the respiratory tract, so it is necessary to protect yourself with a respirator. An important condition for working with the tool is not to wear the clothes of free cut, with hanging edges, as the machine can capture these parts of the clothes.

Cycle is carried out along wood, in the direction of the fibers. If you make grinding against the fibers, the structure of the tree will be disturbed and the result will not please you. The main thing when conducting a cyclist is smooth movement, jerks can lead to the formation of recesses. Fixing such a defect can be very difficult. It is necessary to control so that the electrical wir is not damaged during the cycle. This can cause the current damage and the failure of the equipment.

During the cycle, the goal does not become perfectly even floor, which is extremely difficult to achieve, but a smooth updated surface.

The complexity of the work will be directly scored from the variety of wood, it is easier to work with soft rocks, solid rocks require great efforts.

Features of the cycle of the parquet floor

Grinding of the floor, surface cycle is not the type of activity that requires special skills. But some recommendations will still have to take into account. Having prepared a special tool and equipment, you can start the procedure. If we analyze what needs to be done to carry out work on the floor cycles, then you can make such an algorithm of work:

prepare the room, freeing it from furniture and thoroughly washing it, remove the baseboard;
remove the old varnish using a cycle machine;
having installed sandpaper, remove the old layer of parquet, no more than three millimeters at a time.

To work in the corners, it is necessary to use corner grinding equipment. But at first it is necessary to put the gaps, so that this does not catch your eye, parquet dust is added to the putty. After the putty dried up the place where these works were carried out, they grind. It is necessary to apply varnish in several layers, it is best if it is three layers. Each layer should dry well and only after that apply the next.

In what cases the cyclist will not help

Unfortunately, the cycle is not always possible. There are cases when it will not be possible to restore the coating:

when the gaps of more than five millimeters closing their sealant will give a temporary solution to the issue for a couple of months;
when more than a third of the floor surface in the cracks is the same, you can solve the problem only for a short time;
the parquet was deformed as a result of getting wet in this case, it was necessary to replace the material;
noticeable irregularities and the difference in the height of parquetin this happens when the material was originally laid out in violation of technology ;;
the cyclist has already been carried out and repeatedly the coating has become thinner and it is already impossible to remove the layer;
the surface is exposed to moisture from below, there is no waterproofing;
the floor is damaged by bugs and microorganisms in this case, replacing the coating to prevent distribution to intact areas.

Parquet after the cycle

After work on the restoration of the flooring, special attention should be paid to the surface of the surface. The leaving rules are simple and it will not be difficult to follow them. These recommendations:

make sure that the room has an optimal level of humidity;
try to minimize the entering the room of small acute debris, such as sand, for this it is necessary to install mats for cleaning shoes;
protect the floor from direct sunlight, for this use blinds, curtains, darkening on the windows;
protection of the legs of furniture with special felt pieces of fabric;
cleaning the room only manually;
exclude dry cleaning.

The advantages of the parquet cycle

Parquet is very durable material. It looks elegant and gives the room a luxurious look. But over time, the appearance of the coating spoils. Small scratches, erased areas of varnish, spots and other defects spoil the impression and entourage. The varnish is erased unevenly, some areas wear out faster. When a layer of varnish is completely erased, the tree is exposed, it is darker, dry or vice versa accumulates moisture. Thus, the floor loses its qualities and wears out. If you do not restore the coating in time, you will have to abandon the restoration by cycle, as it will be impossible to do.

To avoid such troubles, masters advise you to cycle the floor surface every five six years. This will allow you to extend the parquet service for many years.

With the help of special equipment, all irregularities, scuffs and parquet are removed by a new look.

To independently deal with the issue of equipment for cycling of the parquet, watch the video. It describes in detail about the features of machines for cycling and polishing of the floor, stages of work and the main nuances that should be taken into account when restoring the floor with your own hands.

Site search