How is the laying of antistatic linoleum?

In the rooms where electronic equipment is installed, antistatic linoleum is usually used for flooring. Also, this type of sex can often be seen in hospital rooms, since dust does not accumulate on the floors.

Current and conductive material also belong to this class, but each of them has its own characteristics and its own styling technology. This linoleum differs from the usual presence in the composition of antistatic substances. So that such a coating performs antistatic functions, laying antistatic linoleum It should be performed correctly, in accordance with all requirements.

The sheets must be jointed and trimmed. After that, the base of the floor and the inner surface of the linoleum are covered with an incorace -bearing primer. The floor on which the primer is applied should have a flat coating and perfect cleanliness. Glue it to the floor with glue, which has tookorassia properties, it increases the capacitance of condensate. The entire area of \u200b\u200bthe glued material is covered with glue. A grounded copper mesh lies under a linoleum coating. The laying of antistatic linoleum occurs using ordinary glue. The glue is distributed evenly over the entire surface of the sheets, regardless of the area.

Dispersing the charge on these floors depends on the presence of moisture and this is the main drawback of such floors. The presence of carbon threads or carbon in its composition gives the coating tookorassing properties. In this case, linoleum performs the functions of the capacitor and accumulates a charge in itself. Discharge occurs when wet cleaning of the floors or with increased humidity. When moisture hits, the material is combined with additives with water molecules, while the process becomes conductive.