Lamination of laminate on the plywood: one of the types of styling

There are several options for flooring laminate. Using the substrate and without it, laying on the plywood laminate, laying on a specialized substrate, on the old coating and on linoleum. Each of the options has positive and negative points. Each of their litter has thermal insulation, high sound insulation and serves to achieve the evenness of the base. Consider each option in more detail.

Lamination of the laminate on the plywood. It is used in the case of large irregularities on the floor. The laying process is carried out by applying on the surface of the cut parts of the sheet. Previously, the surface must be opened with glue or bitumen mastic. Joints should not touch, at one square meter is advised to use at least 15 dubiles for additional fixation. Grinding the plywood sheet is required.

Installation of laminate on the substrate. One of the fastest ways. It is carried out as a result of the presence of even concrete floors. You should purchase a substrate of the required thickness in the store and start laying the laminate. The roll should be uniform evenly along the entire length of the room and cut off the excess parts.

The latter is the most common way to use linoleum in the form of the basis. The surface does not require additional processing and installation can begin almost immediately. A very important fact is that under the cover of the floor should be without fail. If this is not so, it is necessary to remove linoleum and make one of the types of screed, then put the coating in place. This material should be washed and dry.

Each of the ways is convenient and practical. If you decide to update the lower part of the room, any of the options will be satisfactory.