Layer on the windowsill: Installation instructions

The windowsill is the same practical and integral part of the window design, as the window itself. You can often notice that the functionality of this object in everyday life is much wider than you can assume. It is widely used as a convenient place for various, sometimes completely inappropriate, objects. And the enhanced use of this zone leads to a quick loss of appearance, wear, and, in the end, to final damage. The article will talk about repair overlays on the windowsill.

Content:

1. What are the overlays on the windowsill
2. Restoration of window sills
3. Advantages of a decorative lining on the windowsill
4. How to choose plastic overlays for window sills
5. How to install plastic overlays on window sills

Replacing the aged windowsill is not always the only right solution. If we take into account the labor intensity and high cost of the process, then any other option may be more acceptable. Therefore, instead of changing the old windowsill, you can try to restore it. Restoration is convenient primarily because it does not take much time, it will not be necessary to free up a lot of space by the window and mess with the removal of construction waste, which will remain after the demonstration of the windowsill. And the cost of restoration is still less than the complete reinstallation of the product.

The use of plastic overlays, specially made for these purposes, can be considered simple, easy to execute the windfall. They can be purchased in specialized construction stores or even ordered via the Internet. A large selection of colors and drawings of the decorative surface allow you to choose the product in accordance with the color of the window, wallpaper, a common interior style or simply guided by your taste and preferences.

What are the overlays on the windowsill

• Layers are thin profiled sheets, the dimensions of which are adjusted to the window parameters individually. They are used for repair and restoration work in residential premises of various types, as well as in offices, institutions, etc. As an independent element, that is, an alternative to replacing the windowsill, are not used.

• They, like the windows, are made of polyvinyl chloride and, together with the window, look like a whole. This material allows thin pads to be strong enough and rigid to become a protection for the surface of the windowsill. Moreover, it does not matter what the window sill of plastic, wood or concrete is made of plastic overlays is made well with any of them. They are all equipped with a profiled edge and plugs of the same material that will help to hide the shortcomings and irregularities of the base.
• In all cases, installation is carried out in a very short period of time. Simple installation technology involves the fastening of a new part on top of the old without preliminary dismantling. The window sill in this way, according to the assurances of manufacturers, will be able to last for many years.
• The use of linings can be considered not only as a wonderful option for updating the windowsill, but also as a new full -fledged element of the interior.

Restoration of window sills

The reasons for installing linings can be different. It can often be noticed that in a concrete or granite windowsill over time, small cracks and chips appear in the corners and edge. Restoring an even smooth surface is very difficult or even impossible, and therefore it makes no sense to restore it. If the type of window sill does not suit and want to update it, it is better to do with a plastic lining, which not only hide the resulting defects, but also give the old coating a more fresh look.

The windowsill, made of plastic, has more chances to be spoiled due to the fragility of the material and its instability to adverse effects of environmental factors:

• you can damage it with a random strong blow. Often children do this, inadvertently playing near the window;
• often, adults also bring their participation into the process of turning the plastic surface into worthlessness, accidentally leaving hot objects on it, for example, a mug with a hot drink or even an imperceptibly dropped ash of cigarettes or a cigarette butt;
• in rare cases, the cause of damage to the plastic product (due to non-compliance with the requirements for installation) is too close to the neighborhood with the hot batteries of the central heating plastic may deform or even fire will occur;
• mistresses of the lovers of flowers when leaving them can accidentally pour water over the edge of the pots. From such zeal, stagnation of water is formed on the surface, as a result of which spots appear, and getting rid of them will not be easy;
• at the same time, the use of too aggressive chemistry when improving purity will also not increase its life;
• pets and pets are not far behind. Traces and scuffs left by their paws, scratches from claws will definitely not decorate the appearance of the coating;
• the hit of direct sunlight to the surface leads to their yellowing.

The overlays for the repair of the windowsill will also be useful in cases where you just want to increase or decrease its size, refresh the appearance of the window, there is no time or money for more thorough repairs or there is a desire to replace without unnecessary dust and dirt in the room.

Advantages of a decorative lining on the windowsill

What are the positive properties of plastic linings make their acquisition and installation profitable?

• First of all, it is the speed and ease of installation. No need to mess with the dismantling of an old windowsill for a long time, remove construction garbage. It is enough to simply fix the pad on top of the old part with construction glue. This can be done independently, while the complete change of the windowsill will require professional knowledge, since window slopes will also be involved in the process.
• Another advantage is interchangeability to periodically change the overlays one to the other as necessary or if desired.

• In the price issue, the repair of plastic window sills using a lining significantly exceeds the replacement of the stove and will not affect the family budget much.
• Even if there is no particular need for replacement, I was tired of the color and shape of the windowsill and there was a desire to choose it, for example, to the color of new wallpapers or I just want to diversify the interior, there is nothing easier to install a lining and an attractive glossy surface will immediately give the window a completely different, a new look.

How to choose plastic overlays for window sills

Before starting installation, you must first choose the right product correctly.

• The main criterion for the choice will be competently selected sizes, since all the overlays manufactured by manufacturers differ in dimensions. The choice here is quite diverse. Despite the fact that the standard sizes of linings are mainly 3 m per 1.5 m, you can purchase a product that will close as possible to the specified sizes. Therefore, before going to the store, you must first measure the size of the window sill and add a few centimeters for the allowance, which will be needed for correction during installation. It should not be measured on the opening of the window, but along the entire length of the window sill, given the fragments entering the wall. The width is measured from the edge of the frame to the edge of the plate.

• Not only the sizes of the plates are presented in a wide range, but also the color design and drawings on the decorative layer. Layers can be plain or represent a qualitative imitation of natural materials of stone, marble, rare trees. The most typical and common white products.
• At the same time, you should not forget about the acquisition of the end lining on the windowsill, which are formed sides.
• It is worth saying a little about the price. The products of domestic firms are always cheaper than foreign, but, nevertheless, corresponds to the European quality system.

How to install plastic overlays on window sills

Installation of the overlay is a simple matter, but requires accuracy and attention. In addition, this can be done with your own hand, saving on the master. Any complex building skills and the use of a special tool are not required here. But still, it’s impossible to do without tools. For work, you will need a fine saw, a desktop or a hand jigsaw and a regular roulette. And in addition to linings and plugs, there will be also a mounting glue for gluing two surfaces and silicone for embarrassing joints between the pad, wall and frame. When everything you need is in stock, you can proceed directly to work.

Stages of work

• First, prepare a plastic plate and cut it out according to the parameters of a window deepening.
• Figure fragments near the slopes of the window will represent some difficulty here. Gently cut them along the edges of the workpiece with a jigsaw using a paper template.
• By width, the workpiece should not go too much beyond the edge of the windowsill, otherwise any careless pressing can lead to breakdown of the plate.
• Before starting the installation of the pads, preliminary preparation of the lower part, that is, the surface of the window sill, which must be even and clean, is carried out.
• It is advisable to smooth out all the deep bumps on the concrete slab using gypsum putty. On plastic and wooden window sills, special training is not required.
• In order for building glue to connect both glued parts, the surface of the plate must be degreased.

• To fix the two elements of the old and new window sills, installation glue is used. It is distributed on the surface of the windowsill first with a continuous line around the entire perimeter and zigzag, rings or any other patterns inside, the main thing is to fill the space.
• Particular attention should be paid to the edges, since it is on how tightly they are fixed that the general strength of the structure depends.
• A pre-prepared overlay is laid on the base, a smashed base and pressed it in several places with something heavy. It can be a stack of books or a vessel with water. Without fail, such a load is installed at the corners of the window. When the glue dries and the load is removed, you can proceed to the next stage.
• Now it is necessary to lift along the perimeter of the edge of the protective film. Quite a little, only to free the edges of the lining from it.
• After installation on the sides of the plate, open places remain, which should take the side plugs. The end plug is a decorative plastic element made of the same material and the same color as the overlay. The required length should be measured from the wall to the edge of the window sill.

• Then, if required, the finished plug is cut according to the obtained sizes and set in place.
• Now it's about silicone. All joints near the slopes and window frames must be treated with sealant. The thin layer of silicone is evenly applied to the seams, so that only hide the processing places and gently smooth it. It is necessary to work with the sealant very carefully so as not to spoil the appearance of the finish. Leave until completely dry.
• In conclusion, the protective film should be completely removed.

This is where the work is over. If everything is done correctly, the updated window sill will look neat, and certainly without the previous flaws.

A new beautiful lining is, of course, great, but you need to remember that the rules of operation of plastic lining are no different from those that are designed for plastic window sills. And all those factors that led to damage to the previous coating, if they do not take them into account, will be dangerous for the new one. In order for the coating after the repair to live as long as possible, it is worth it to treat it if possible.

Plastic linings can be considered as an easy way to give old worn window sills if their appearance is no longer satisfied, or as a quick method of eliminating defects formed in conditions of prolonged operation. If there is no time for major repairs or not a desire to live during repair in construction mud and dust, this option is also acceptable. Or if there is a desire to simply update and refresh the design of the room, give it novelty and colors, the overlays on the windowsill can also play a role. They are inexpensive, easy to install and care, and the achieved effect as a result is the most positive.