More than half of the owners of country houses sooner or later come across ...
More than half of the owners of country houses sooner or later come across ... |
There is a common problem in regions with snow winters ... |
Mosaic tiles can give sophistication and originality even the most ... |
Standard gray slafers does not attract attention with its appearance at all. However, having painted it in certain colors suitable for your exterior, it is possible to radically change the opinion of this material. Schifer paint should have certain properties, among which, first of all, its resistance before moisture and color change. We will consider how to choose the right paint for the slate.
Slavifa is a rather popular material for roof decoration. In addition, with its help it is possible to build fences for the site and even small outbuildings. For the manufacture of wave slate, asbestos cement is used. With the help of a special fibers, the mechanical resistance of the slate increases.
Shifer sheets have a standard gray color. However, you can paint this material in almost any color or shade. Not only its attractiveness, but operational characteristics, improve from this.
In order to learn more about this material, we suggest that you familiarize yourself with its advantages and disadvantages. Let's start with advantages:
Among the shortcomings of the slate, we note:
In the process of exposure to moisture slate and temperature changes, it eventually begins to be covered with a crumb of asbestos, as a result of which the formation of microcracks and moss, which reduces its attractiveness.
In order to prevent this unpleasant factor, it is recommended to paint slate. The paint will provide additional protection of the material from moisture, the formation of moss, as well as increase the attractiveness of the appearance of the slate coating. Modern colors also contain antiseptic substances that prevent the development of mold and fungus in them. With their help, biological protection of the roofing is provided.
When planning the replacement of the old roof decoration with a new slate, we recommend that you initially think about its painting. At the same time, it is recommended to perform these work before the installation of slate on the roof.
In relation to the main active substance of paint for slate, they are:
1. Acrylic or water -dispersion - this version of the paint is applied to the surface of the slate previously covered with primer. Acrylic paint for slate protects it from moisture and destruction, increases its sliding characteristics, thanks to this, atmospheric precipitation flows easier along the roof. Acrylic -based paints dry quickly and have a variety of color palette.
2. Painting for painting a slate on an enamel basis - is characterized by a high content in its composition of binders, has moisture -proof properties, and is resistant to atmospheric precipitation. The coating, after staining, acquires additional strength characteristics. The pigments that are part of the paint protect the coating from fading.
3. The roofing paint according to the slate in the form of liquid plastic is a synthetic material with a bituminous, polystyrene or polyvinyl chloride base. These paints are affordable, however, compared with acrylic paints, this material has lower moisture -proof properties. In addition, the composition of such colors quite often contains substances harmful to human health.
4. Rubber paint for slate is a rather popular material for painting the roof. Among the advantages of rubber -based paint, we note:
The use of rubber paint for the decoration of the slate extends its life several times. The slate becomes pleasant and attractive in texture. In addition, the paint perfectly waterproof microcracks on the slate. To guarantee the durability of the use of the coating, it is recommended to apply paint based on rubber in at least two layers. A few hours are enough to dry out the paint.
In the ratio with manufacturers of paint for slate, we note:
1. Dachbeschichtung - a paint of German origin, is characterized by a high cost, which quite justifies its operational characteristics. The paint also has high adhesive properties, good strength, duration of operation. However, such paint is suitable for covering natural tiles or slate.
2. Polyfarb - Polish paint on a dispersion basis, dries quickly and has a rich color palette. The paint is of good resistance to moisture and ultraviolet radiation.
3. Aqua - Finno -Swedish paint, dissolves with water, is resistant to an aggressive alkaline environment. It is used not only for staining the cipher, but also for applying to a concrete base.
Tikkulir offers paint for the KILPI slate. It is a coating based on acrylates, diluted with water, allowing not only slate, but also a bitumen roof or concrete tiles.
Using this paint, it is possible to significantly extend the service life of the slate. In addition, it is highly resistant to solar radiation, moisture and other atmospheric influences.
Acrylate -based paint reduces the level of moisture on the slate coating, thanks to this, it is possible to maintain its original appearance for many years. The paint contains special components that prevent the development of mold and fungus. The coloring composition does not lose its elasticity both at high and low temperatures.
Using the Tikkuril shifer paint, it is possible to create a beautiful matte coating, which opposes the accumulation of dirt and dust on it. There are many flowers for painting slate, which are harmoniously suitable for any exterior.
Before starting the slate with rubber paint, the surface should be prepared. In the presence of dirt, spots of fat, dust on the slate, they must be removed. Since slate is a porous surface, it is necessary to cover it with a primer in several layers. Thus, it will be possible to reduce paint consumption.
To degrease the surface, use the white spirit. If the slate has already been painted earlier, try to remove the paint. For applying paint, the air temperature should be from 15 to 30 degrees of heat. At the same time, the maximum humidity permissible to perform work is 75%.
Before starting work, read the instructions for the operating composition. Next, open the container and mix the paint. Keep in mind that the dilution of paint with the help of olifa or any other diluent is unacceptable.
If the paint is distinguished by increased viscosity, then the option of adding a superstront 100 and then in a very small amount is possible. To mix the paint, use a drill with a mixer nozzle or a construction mixer.
To apply the paint to the surface of the slate, a roller or a pneumatic transmitter is used, in which case, the surface is covered in several layers. In the process, periodically mix the paint.
When asking the question of what paint to paint the slate on the roof, it is necessary to initially decide on the type of slate used to finish the roof. Most often it is a wave or flat slate. For this or that option, the following types of coloring compositions are suitable:
1. Paints on an acrylic basis - differ in environmental friendliness, dry quickly, adhere well with the coating, and also contribute to the creation of a smooth surface. Using such a material, it is possible to quickly and easily paint any type of slate. The main rule of the quality operation of such a coating is to comply with all conditions from the manufacturer on the application of the coloring composition.
2. Bitumen coloring compounds are less popular because of their toxicity, although they have an affordable cost.
3. Liquid plastic forms a protective coating on the surface of the slate, which significantly improves the service life of the slate.
4. Among the main advantages of silicone -based colors, we note:
At the same time, such compositions are quite expensive and are characterized by high consumption.
5. Oil -based enamels are also used in the process of staining the slate. They do not lose color for many years of operation, have quite saturated and bright shades, but drying out for a long time, approximately 5 hours.
6. Painting for slate on a silicone border basis - consists of silicone with the addition of dyes and various kinds of naphy substances. The material is quite durable, stable before mechanical substances.
What shifer paint is better to decide, but remember that in the process of choosing a paint, it is necessary to take into account the individual features of the work.
Before starting work, you should prepare the surface for staining if the slate is not yet laid on the roof, then paint it before the installation work. If you do not adhere to the recommendations for preparing the surface for staining, then the service life of the paint will decrease significantly.
Before the start of painting, perform the following actions:
In addition, the use of the primer allows you to increase the level of adhesion between slate and paint, while the level of paint consumption will decrease. Otherwise, if you do not carry out the primer of the slate, the paint will peel off after a while.
Try to carry out work on the painting of the slate in calm and dry weather, while the optimum air temperature is 22 degrees. The easiest way to apply paint to the surface is a sprayer. However, the amount of paint, when using a sprayer, increases slightly in the consumption. Be sure to apply a composition of two or even three layers, after waiting for the previous one.
All information on the drying time of the composition is in the instructions, so be sure to read it before starting work. The maximum coating strength will be purchased every other day or two after applying the paint. With the help of a roller, it is not recommended to color slate, as it is inconvenient and very long. The roller is suitable exclusively for a flat slate. At the same time, observe the rules for the safety of staying at the height. Shoot not slippery shoes and insurance.
here in this store is big
here in this store, a large assortment of roofing paints on the slate https://www.kraski.ru I advise!