Square for a bathhouse with foil: Features of installation

Modern production technologies provide the opportunity to make heat -insulating materials of various types and structures. Of course, the application of each is due to a number of requirements both to the environment of the future location and the methods of installation and operation. The loyalty of pricing policy is given the opportunity to purchase heat insulators to everyone, regardless of their financial viability. The article will talk about foil insulation for the bath.

Content:

The importance of foil insulation in the bath

Bath belong to the category of structures where the constant presence of a certain level of humidity is assumed. This, in turn, limits the choice of not only building materials, but also insulation. Specialists strongly recommend the use of thermal insulation material with foil or a metallized film, which is based on foamed polyethylene.

Great operational characteristics provide the ability to create a kind of thermos indoors. Thanks to the reflective effect, all the heat is delayed in the room, without passing through the existing cracks in the walls.
The implementation of fasteners of foil troops for walls allows you to hide the existing defects on the surfaces. It can be not only the walls, but also the floor, and even the ceiling. Since the structural features during the construction of the bath provide the presence of hard -to -reach places, the installation of this type of thermal insulator will have to be very useful.
It would seem that the project of building a bathhouse should already provide all the nuances that allow the maximum heat in the room as much as possible. However, insulation with foil material has its advantages compared to analogues.
As a rule, a bathhouse is a stationary single structure made using a wooden beam. If the structure is not properly insulated, then a lot of time and energy can take it to warm up. Supporting the optimal temperature regime is necessary in the prior. And a large amount of energy can be spent on this. At the same time, there is a certain pattern, the higher the air temperature in the room, a larger amount of heat is disappeared through the cracks and cracks formed as a result of poorly performed work on wall decoration or natural aging and cracking of the material under the influence of constant air temperature changes.
Even if the bathhouse is a continuation of the residential structure, then it is not worth neglecting this method of insulation. After all, penetrating couples can negatively affect other materials from which the structure is erected. This, in turn, can cause rotting of individual elements and partial destruction of the surface, as well as contribute to the propagation of various fungi and microorganisms. As a result, decorative decoration in the room may suffer.
Having improved the operating conditions of the bath, you can thereby extend the overall period of use. The presence of a vapor -protective barrier will condense warm wet air exactly where it is necessary.

There are many opinions about what exactly needs to be insulated in the bath. Some believe that warm air rises up and fasten the foil layer of material should be to the ceiling. Others believe that almost everything needs to be insulated.
In order to prevent heat loss, it is important to place the insulation on all available surfaces in the room. However, do not forget to leave a gap, the dimensions of which can vary within 15-25 mm between the treated surface and foil material.

The choice of foil material

On sale, the heater with foil is presented in a wide range:

foil rolled insulation It has a fairly large rolon width. In this case, the thickness of the foil can vary within 30-300 microns, which allows you to use the material in these conditions. You can buy a heater with foil in the price range from 20 to 200 rubles/m2, depending on the thickness of the material (2-40mm);
paper or fabric base with a foil layer, an excellent version of the insulation, which has the property of resistance to air temperature above 300 C. Preserving heat inside the room excludes the likelihood of forming traces of mold and smell of dampness;
foil basalt insulation It has the property of resistance to fire (fireproof), which allows you to raise the temperature to the limit of 150-160 0 S.

Of course, each species has its own characteristics not only in terms of fasteners, but also in operational characteristics. At the same time, the possibility of using in certain conditions is regulated by the manufacturer. The thickness of the foil insulation does not matter. It is important what kind of foundation structure it has.

The thickness of the heat insulator affects the formation of pricing, so the price of insulation with foil on the basaltic basis is 800-1200 rubles/roll.
This indicates that this material is available to almost all segments of the population for insulation not only a bath, but, for example, a balcony.
A wide range of insulation options can be the main reason for the difficulty of choosing. Someone, relying exclusively on their own intuition, buys foil material. Others carefully study the characteristics, listen to the opinion of friends or specialists. The main thing is that both of them carry out the only correct solution that allows you to purchase a high -quality insulation. Visually assessing the volume of work, it is important to remove the exact dimensions of the room where it is supposed to carry out thermal insulation. This will allow the purchase of the right amount of material with maximum savings.

Rules for choosing insulation for a foil sauna

Each manufacturer adheres to its nuances of the manufacture of heat -insulating materials. However, in general, the production technology is the same for everyone, which allows us to argue about the high quality of products. Mandatory on the package indicates the approximate value of the resistance of heat transfer.

When making the choice of material for insulation of the bath, it is necessary to carefully study the alleged operating conditions. In addition, the range of the range is indicated, the thermal conductivity coefficient in which can vary, this may be evident that this type of material is of low quality, since this value in this case indicates the instability of the characteristics. Experts say that the following pattern was established according to the results of numerous experiments: the lower the thermal conductivity coefficient, the better the material will maintain the heat of the room.
I would like to focus on the information on the labels. As a rule, manufacturers indicate approximate data regarding the operating conditions of the heat insulator. You should be extremely attentive, since the resistance values \u200b\u200bof not a specific material are indicated, but its characteristics in the conditions of the dimensions of a particular design, where it was involved in the tests.
Many building materials that have an organic basis, in the process of heating, release toxic substances to high temperatures, which is simply unacceptable, given that people rest and restore their health in a bath or sauna. Inhaling toxic couples for a long time, you can cause irreparable damage to health.
The insulation self -adhesive with foil when exposed to heating can simply melt. Therefore, heat insulators should be selected with a minimum flammable indicator. Fire safety - first of all.

The main characteristics of thermal insulation material with foil

The undeniable advantages of using this type of insulation in the steam room include the following factors:

high indicator of resistance to temperature changes (from 00C to +1500C);
thanks to the mirror surface, the heat flows of air are reflected;
an excellent indicator of water resistance, which expands the spectrum of using foil insulation (walls, ceiling, floor);
it has the properties of heat, hydro- and vapor barrier. This indicates that the material can be used for insulation of any real estate, regardless of its further use (residential, production);
the ease of installation provides the opportunity to do all the fasteners with your own hands without involving outside help.

Support with foil use

Unlike other heat insulators, foil insulation is a priority material in construction and is popular in the implementation of repair work in the premises of baths and saunas. In addition to the fact that a high indicator of the insulation of steam and heat indoors is achieved, excellent sound insulation of individual rooms is also noted. This is important if in one building there are both production facilities and leisure rooms.
Quite often, this material is used to warm floors in multi -storey buildings, where concrete slabs act as ceilings. In addition, when laying communication systems, many construction teams use this insulation to eliminate the probability of heat loss even if pipes are located deep underground. In places where soil freezing is recorded, foil material will not allow frost to grab, for example, water.

Features of installation of foil insulation

Before proceeding with the installation of insulation with foil, it is necessary to carry out a number of events, namely:

process the surface of the walls with a special tool that will prevent the formation of mold and dampness;
wooden strips should be filled with a certain interval around the entire perimeter of the room;
a heater is attached to this frame. It doesn’t matter what kind it has a roll or tile;
the joints of the joints are subsequently glued with special adhesive tape, which prevents moisture from entering a layer of insulation;

foil material must be sewn with lining. However, you need to leave a small gap in order to avoid the contact of the heated lining and foil. The mirror surface will fully reflect the incoming streams of hot air;

it is not recommended to use foil insulation for the floor in the bathhouse, since the floor system involves a concrete screed, over which a wooden flooring is mounted;
in addition to insulation of walls, ceiling and floor, it is also important to heat insulate the entrance doors;
the outer walls should be insulated with particular thoroughness than interior.
To perform fasteners of foil material in the bathhouse, you will need a certain list of tools and construction supplies:
strips of a certain size made of wood and pre -treated with special products that protect the material from moisture;
actually, thermal insulation material itself;
construction stapler or ordinary nails;
special adhesive tape (aluminum or vapor -permeable) for masking joints of insulation.

Having studied the proposed material and buying all the necessary building materials, you can safely start insulation of both the entire building of the bath and individual rooms. If any questions arise in the process of fastening of foil material, then having a certain baggage of knowledge, you can solve all the problems without any problems. If there is no confidence in your own strength, then you can use the services of qualified specialists who, in full or partial volume, will perform the task assigned to them.

Site search