Site search

 

.

Often, when in old houses it is necessary to insulate walls inside the apartment ...

.

 

If you have taken up the insulation of the bath, keep in mind, warming the ceiling in the bathhouse ...

.

A windproof membrane is a rather new material in the construction market. His...

Border for a bath. DIY installation


Even if you want to install a bath on the wall is more tight, you are unlikely to succeed! In any case, a gap will form at the junction, since perfectly even walls do not exist. Previously, such gaps were covered with a cement solution, and with oil paint covered on top. There are at the moment there are more elegant solutions! Borders for the bath will come to your aid.

Content:

  1. Features of borders for baths
  2. Types of Bourgehors for Bath
  3. DIY ceramic border installation
  4. DIY plastic border installation

Features of borders for baths

An open joint at the side entails consequences. To begin with, such gaps are able to spoil the appearance of the finish that you created hard for a long time. Such a gap promises you increased dampness in the bathroom. Water will fall through the gaps under the bath during the adoption of the shower.

Such moisture dries for a long time, especially with a large level of humidity in this room, or if you have covered the space under the bathroom by installing a decorative screen. Constant dampness is the most favorable conditions for the growth of the fungus, mold and harmful microbes. In addition, there are always parts and elements of metal in the bathroom. So they will rust quickly.

Thus, it is recommended to prevent the process in which water seeps under the bath occurs. So you eliminate excessive dampness, and you do not have to fight with a mold. The borders for the bath (corners, skirting boards) are intended specifically to conceal such joints that remain between the wall and the bathroom.

Choose the most successful option, given the following points: the material from which the wall decoration is made, financial considerations, the size of the gap that remained between the bathtub and the walls of the walls. Most manufacturers initially involve the installation of curb stone, which is complete with tiles. After all, the cost of borders for the bath is not too large.

If you have finished the walls in the bathroom with other material, not tiles, it is better to use a border from similar material. Say, under glass wallpaper or plastic lining, you can choose a plastic curb. The border stone, which is combined with the main color scheme of the interior, will support the balance of color. Using these elements, it will be possible to carry out functional zoning of the room, highlighting the wall section. To conceal the junction between the wall and the side of the acrylic bathtub, choose an acrylic product.

Types of Bourgehors for Bath

Borders of various types are presented on sale, which are made of various materials. Before buying a bathroom profile, it is recommended to familiarize yourself with each of them.

Plastic borders

Plastic is known among buyers as a practical material that belongs to the category of inexpensive and very popular goods. In addition, it is great for working in the bathroom. Therefore, the PVC border will be the most economical option. Plastic borders for the bath are presented in a variety of versions, and you can buy the most suitable for any interior. Install the borders from plastic on glue using the compositions of liquid nails.

Self -adhesive border for baths made of plastic are also presented on sale. To install such a product, simply remove the protective coating, subsequently attaching a part in place. Brotes made of plastic are glued under the tile or on it. The product in the first situation is installed even before they begin to lay the tile. In the second case, a joint forms between the wall and the bathroom after the completion of the repair work.

Ceramic borders

Plastic is very popular, but not many trust borders from such light material. It is for those buyers who value thoroughness that ceramic border stones for the bathroom were created. This material is durable and durable. If the walls of your bath are laid out with tiles, then it will be perfectly combined with such a finish.

Previously, in order to decorate the gaps between the bathroom and the wall, they used ordinary tiles, creating a border in place and cutting whole tiles into pieces of the desired size. Today, such a scrupulous work has disappeared. You can buy ready -made ceramic borders. In addition, not only a tiled border for the bathroom is presented on sale. If desired, you can find angular elements for decorating the angles of adjoining.

The term of use of ceramic borders is not limited to one decade. However, subject to the correct installation of the product. And the installation of a ceramic border on the bath is not at all easy. Such work can be compared with laying tiles, if you evaluate its complexity.

Ribbon borders

Ribbon borders, which are installed at the junction of the baths and walls, are very practical and convenient. They are peculiar sealing tapes that are made of polyethylene. They cope with their functions perfectly. Ribbon borders can have different widths. The height of the border in the bathroom is also different, so you will find products of exactly the size that you need. This is very convenient from a practical position.

The installation of the sealing tape is even easier than the installation of plastic skirting boards. Although such a border has a self -adhesive base, use a special silicone sealant at the same time to increase the reliability of the tape border.

Natural stone borders

In addition to the above models of borders, you can find more solid options. These are border stones made of marble and granite. Also luxurious material is the stone of travertin. The borders made of natural stone look gorgeous, giving the design of the bathroom sophistication. If you decide to equip an expensive interior, then remember that you need to pay attention to the unity of plumbing equipment and finishing materials.

If you prefer a border made of marble, then the bath should be marble, otherwise the expensive accessory will become the only subject of pride in the bathroom. In addition to the unique natural beauty, the border made of natural stone also demonstrate impeccable quality.

DIY ceramic border installation

The advantages of the ceramic border

Often people prefer precisely ceramic borders for the bath, since in comparison with plastic products they have a lot of advantages:

  1. Masters say that plastic borders gradually pass water. Ceramic border stones are deprived of this drawback.
  2. If the bath is installed far from the wall, then the installation of PVC profile is impossible. In this case, it is recommended to fill the voids with slices of brick, and select the curb from ceramics.
  3. Ceramic borders demonstrate a high service life, so they will become the best solution during a thorough repair.
  4. Ceramics are characterized by excellent technical characteristics that are due to the chemical composition of the material. This is a high resistance to deformations and the gap, high hardness and strength, the lack of reaction to environmental factors.
  5. Plastic borders are rapidly clouding and acquire a characteristic yellowing shade. But ceramic products retain the original color during the entire service.
  6. The range of ceramic skirting boards is really impressive. They are both white, and colorful, textured and without texture, convex and concave.

The main drawback of ceramic borders is in low resistance to impacts: they are destroyed when a heavy object gets. However, if you are careful about the decoration, it will not suffer.

Preparatory work

To install a border from ceramics, prepare the following materials and tools:

  • Silicone sealant, preferably one that has special additives, which prevent the development of mold fungus;
  • Ceramic borders with a small margin;
  • Tile glue;
  • Putty knife;
  • Sandpaper;
  • Pistol for squeezing sealant;
  • Passatigi.

If you bought a sealant in a tube, you can lay a curb without a pistol. To install the border, 2-3 tubes of silicone sealant of 50 ml are consumed on the bathtub.

The number of borders for the design of the joint between the bathroom and the wall is calculated as follows:

  1. Measure the three sides of the bath, which are in contact with the wall of the room;
  2. Divide the result by the length of one border.
  3. Trick the resulting value in the larger direction.
  4. Add a couple more products before the amount of skirting boards in case the finish is damaged or broken.

Installation of ceramic border for tiles

Installation of a border from ceramics under the tile is carried out in this way:

  1. The installation of the ceramic border start cleaning from cleaning. Along the perimeter of the bathtub, peel the places that come into contact with the tiles from dust and pollution. Wipe the surface dry and degrease.
  2. Then apply a sealant layer using a special gun for this. Fill the gap evenly. Use a spatula for alignment. You can also smooth the sealant with a hand moistened in water. At the same time, gaps should not occur, because water will seep through the smallest gaps.
  3. While the sealant hardens, prepare glue for tiles. Carefully follow the instructions on the packaging. The glue should stay on the workshop well. He should not crack when you knead it with your hand, and spread.
  4. Before laying the product, cut one edge at the junction. Cut should be cut at an acute angle of 45. It is recommended to use a grinder with a diamond disk. Also, for cutting a ceramic border, you can use pliers: make markings of products at an angle of 45, carefully break off small pieces from the curb along the drawn line, as if baking them. Snipple the edges on the cut, using the sandpaper.
  5. Contact the joined corners among themselves in pairs. So the gap between them will turn out to be minimal. If you have to make two joints, cut two pairs of ceramic borders.
  6. Cover the back of the border with glue using a spatula. Glue the ceramic border to the junction and remove excess adhesive composition. It is recommended to start from the corner. Lay the following products in the same way. After laying, the surface must be wiped with a damp cloth.
  7. Make sure that they fit together as tightly as possible. There should be no intervals between the products located nearby. It is useful for you to know that when installing and aligning the corners, you can slightly tapping them, using a rubber clay for this.
  8. After curing the glue, the next day, pour the laid corners abundantly with water. So you will fix the adhesive composition even stronger. If there are small transitions and the gaps between the tiles and the borders, it is worth applying silicone sealant. You can also use the grout that remained with you after the installation of tiles. If there is no such grout, choose the composition, which has a similar tone with already used.

Installation of a ceramic border on tiles

It is much easier to install borders from ceramics on tiles:

  • Carefully clean the surface of the bath and ceramic tiles, which is already laid on the wall, degrease and proceed to gluing the curbs.
  • Then treat the wall on which the product will be attached with waterproof glue. The most famous adhesive of this type is liquid nails. After you smear the wall, wait a certain amount of time, as indicated in the instructions.
  • After that, take a ceramic corner and press to the decoration on the wall. Press to the tiles as tight as possible until the glue grabs. The properties of the border, associated with the impossibility of penetrating water into the gap between the wall and the bathroom, also depend on the strength that you will spend to press the curb.
  • When fastening the border on the tile, it is recommended to use the level. Remember that you should remove excess glue on time.
  • After the adhesive dries, process the seams with special means to extend the time of the service of the ceramic border.

DIY plastic border installation

Currently, two types of plastic corners are presented in the assortment of construction stores: a border made of PVC plastic in the form of a corner and a self -adhesive border in rolls. The price of a plastic border is much lower than self -adhesive. After all, he himself is not responsible for protecting the surface from water. Similar functions are performed by silicone sealant, and a plastic corner only a decorative element for masking a sealant layer. But to install a self -adhesive border for the bath, nothing is required of what is needed to install the corner.

If you are interested in how to glue a border from PVC on a bath, then act in the following sequence:

  1. Wipe the surface of the tile and the edges of the bath with a dry cloth, where the curb will be located. Make sure that the surface is completely dry. Smell the gap with an aquarium sealant and wait until it dries.
  2. Then measure the length of the bathtub using a tape measure. Then measure this value on the curb and cut off excess material. For convenience, cut the profile into pieces that are equal to the sides of the bath. Sprinkle both ends of the corner at an angle, which is 45 degrees.
  3. Before the installation process of a plastic skirting board, stick a masking tape 2 mm above and below the corner on the edges of the bathtub. This is done to protect the enamel of the bathtub from staining with glue. And on the curb itself, stick tape.
  4. Attach the product between the wall and the bathroom, press tightly. After that, bent up a small edge of the corner to form a small space between it and tiles. Insert a gun there to squeeze the sealant. After filling the seam, it is recommended to smooth the sealant using a spatula. Repeat similar actions with the lower part of the curb.
  5. If you work with an assistant, this is very helpful. After all, the force of pressing the corner determines the quality of gluing the border for the bath. Now you can remove the tape layer.
  6. A plastic border for tiles is also installed at the stage of installation of tiles, which hides part of the corner. This method is considered more reliable for waterproofing. However, a similar border will be replaced exclusively with tiles.

The plastic corners that are installed on the tile are able to withstand only a year of operation, maybe a little more, and then they will have to be replaced. If a plastic curb does not suit you, give preference to ceramics, which will cause trust in any. Ceramic corners with proper care will easily last before re -repair in your bathroom.
 

 

 
0

 

Comments

(IF You're a Human, Don 'Change the Following Field)
YOUR FIRST NAME.
Anonymous ( fast registration on the site)