Install the code lock on the gate with our own hands

The installation of a code lock on the gate helps to protect the site and house from an extraneous invasion. The code locks do not need special keys, which are often lost. We will consider the varieties and features of the installation of code locks further.

Table of contents:

1. Features, advantages and disadvantages of the installation of a code lock on the gate
2. Street code locks on the gate: varieties and characteristics
3. How to choose an electric code on a gate
4. Installation of a code lock on the gate: technology for performing work

Features, advantages and disadvantages of the installation of a code lock on the gate

The most common version of the code lock installed on the gate is a mechanical code lock. Such devices can immediately snap after the gate closed. For the external opening of the lock, it is necessary to introduce a special code combination, and for the internal opening it is enough to push the bolt.

Among the advantages of the use of mechanical code locks on the gate is highlighted:

• lack of necessity in the keys, and, accordingly, in the manufacture of their duplicates;
• affordable cost;
• lack of need for electric power;
• a small risk of breakdown;
• Ensuring a high level of safety of the dwelling.

However, such a mechanism has one drawback that consists in the need to remove the lock from the door if you plan to change the code combination, to open it.

The electromechanical type of gate lock is characterized by a complex device and the presence of a mechanical drive. This type of locks is ideal for installation on gates, gates, doors. Among the shortcomings of such a castle are its high cost, and among the advantages - complete safety and the highest level of secrecy.

Electronic -type code locks are able to open the door or gate only if the code is entered through the keyboard. The principle of the device of this lock is highly difficult, in its inner part there is the presence of an electronic unit programmable for codes. Among the advantages of installing electronic castles, the lack of the ability to open such a lock using a master key is noted.

On some gates, a hinged -type code lock is installed. Such mechanisms, although they do not need a special installation, are distinguished by not a particularly attractive appearance.

If we compare the above types of mechanisms, then the best option for installation on the gate is electronic. The mechanical code lock has buttons that, after a long period of their operation, are slightly erased, according to how the buttons are erased, you can determine the code combination and open the gate. Electric type locks differ in particular originality, quality and high secrecy.

Street code locks on the gate: varieties and characteristics

A pretty good alternative to a mechanical code castle is a magnetic boor on the gate. Such locks have special keys, with their help it will be possible to open the gate. Such locks have neither a button nor a special mechanism in the form of a keyhole. They have a certain area on which the magnetic key is applied.

The use of magnetic locks at secret facilities or industry is more common. Since at home, each family member should have a magnetic key, and again there is a possibility of its loss.

Among the advantages of this type of castles, we note:

• lightness and speed of opening a magnetic lock;
• lack of need for constant maintenance and repair;
• lack of unnecessary mechanisms and parts that need to be repair and lubrication;
• A high level of secrecy, a low tendency to breakdown, a high level of security of the site from extraneous invasion.

The duration of the operation of such locks depends on many factors, among them they distinguish:

• applying the varnish on the surface of the magnet, so the magnet perfectly opposes moisture, temperature and corrosion;
• The presence of a galvanized layer on the surface of the magnet makes the lock more persistent in front of external stimuli and an aggressive environment;
• The presence of a nickelled coating reduces the risk of damage to the castle with destructive factors.

In relation to the principle of operation, code locks are:

• mechanical;
• electronic;
• electromechanical.

The first version of the castle differs primarily in that it does not have a keyhole. Therefore, a master line or twist is unsuitable for hacking it. However, if you forget the code from such a lock, then certain problems arise with its use.

The principle of operation of the lock is based on the presence of special rings inside its special rings, which in a certain position ensure its opening and closing.

Electromechanical castle - a combination of the previous option with an electronic lock.

This device has a mechanical drive, the performance of which is provided by electricity.

Such locks are relevant if the gate has heavy weight and large sizes. However, the electromechanical type of lock is quite expensive and requires additional costs for its installation. Combinations of the code of electromechanical locks consist of both electronic and mechanical combinations.

The electronic castle is based on the presence of an electronic unit inside its electronic unit, which has a certain program, the introduction of the correct code allows you to open the lock.

In the ratio with the location of the lock, code devices are:

• hinged;
• overhead;
• cut.

The first option does not require additional costs for installing it and is easily removed, if necessary. However, the appearance of such a castle is not particularly attractive, while there is the possibility of its quick hacking.

A higher level of security provides a patch code lock. However, its installation requires compliance with special instructions. There is a special button on the overhead lock, when pressed, it is opened. The mortise castle in the gate is the most reliable and convenient in operation, although it requires additional costs for its installation.

How to choose an electric code on a gate

If we compare the code locks with ordinary, then the first, the following advantages are highlighted:

• lack of the possibility of making a duplicate key;
• resistance, both in front of high and low temperatures;
• Resistance before mechanical hacking.

Before choosing a code lock for a gate, you need to decide on such functions:

• the level of security that should provide the castle;
• operational characteristics - street or indoor option, the presence of a canopy above the gate or its absence;
• The cost of the device.

The last factor determines the lock model: mechanical or electronic. Since the first option is cheaper than the second. In addition, choose code locks should pay attention to digital combinations that can be introduced, the possibility of changing them. The higher the number of combinations, the less probability of hacking the lock.

The field of use of code locks is quite wide, so the number of manufacturers of these devices is also high. When choosing between a particular company, we recommend, first of all, pay attention to the technical indicators of the devices, comparing alternative models. Also, we recommend that the seller demand certificates of conformity of products by international standards.

If necessary, in receiving an inexpensive, but at the same time high -quality lock, we recommend that you stop at the Russian company Mettam. Castles from this manufacturer are quite strong, wear -resistant, have a convenient design and are easily operated. The code panel of the castle is able to support more than a thousand different combinations.

More advanced models are produced by Sirius. Such models of locks are approximately more expensive, but differ in the presence of more code combinations. The code castle has a creative case and modern design. There are two color schemes of code locks - with gilding and with a chrome coating. The presence of a built -in fuse on the castle increases the level of its reliability.

Installation of a code lock on the gate: technology for performing work

Before installing a code lock, it is necessary to study its main components. The composition of the standard mechanical code lock contains elements in the form:

• corps part;
• canopies;
• blocking particles;
• additional details, such as sliders;
• code elements.

In the ratio with the opening method, mechanical code locks have a circle for a code or button. The option with buttons is more reliable, since after the gate closes, its locking is automatically lock. However, such locks have few combinations, so the possibility of hacking them is at an average level.

Tint circles are characterized by a large number of combinations, however, this option is not installed on the gate, it is more suitable for the safe.

Depending on the type of outer panel, which is installed from the outside of the gate, the code locks are divided into:

• locks with button panels;
• Locks with optical panels.

The first option is more common, such locks are present on most gates and doors to the entrance of multi -storey buildings. Among the advantages of the button panel, we note the simplicity of its operation and the convenience in the set of code. Such panels are made of rubber, plastic and metal. The most practical and durable buttons made of steel are.

However, in places with low cross -country ability, such as a private house, it is recommended to install optical panels on the gate. This system is the latest development and works on the principle of setting code in such a way that a person fixes his finger on the site with infrared rays. On each of the digital panels, these rays are installed, with the right comparison, the lock opens the gate.

Some models of code locks are equipped with additional protection against hacking, a microphone and a speaker, with which you can contact the owners. The light panel covers the non -glass glass.

To install the code lock, you will need:

• drills with a set of drills;
• screwdriver;
• Bulgarians;
• pliers;
• Kusachek;
• screwdrivers;
• tool for sawing;
• ruler.

Instructions for installing a code lock on a gate from corrugated board with your own hands:

1. At the beginning, it is necessary to mark the gate on which the lock will be installed. For this, each of its parts, the internal and external are installed on the gate and their location on it is planned.

2. First, the main part of the castle is fixed, for this, use screwdrivers and screws. Keep in mind that the interval between the locking strips and the gate should not be more than 0.3 cm.

3. Next, the back cover is removed and the lock and its handle are fixed. Set the back cover.

4. Check the operability of the lock, select the code combination to open it.

Keep in mind that the measurements before installing the lock are performed in relation to the handle and additional elements of the fittings. To increase the accuracy of measurements, use the response bar and pencil. Keep in mind that in order to avoid cracking, drilling is carried out near the extreme sections of the castle.

If you plan to install an electric lock, then at the same time, the elementary safety rules for working with electricity should be followed. An electric code castle requires a cable supply to it. To begin with, the panel is drilled on which the code characters are located.

The main convenience of using such a castle is that if the owner of the house has forgotten the code, then there is the possibility of transcoding the lock from the inside of the gate. To do this, you do not need to remove the lock compared to a mechanical lock.

To install a magnetic code lock, prepare tools in the form:

• electromagnetic code lock, fasteners, corners, strips and anchor;
• output buttons;
• reader;
• set of keys;
• power supply;
• controllers.

In order to install a magnetic lock, follow the instructions:

1. In the steel frame of the gate, drill the required number of holes for screws.

2. Fix the lock on the surface.

3. On the gate sash should be installed a bar that ensures its opening.

4. Next, the cables are installed, which connect the lock with the reader. Install it on the fence or directly on the gate.

5. From the outer part of the gate, the controller is installed, which will recognize the keys or cards.

6. The inside of the gate is equipped with a button, with which the gate opens without a lock.

7. After the installation of a code magnetic lock, work is carried out to connect it. For these purposes, a special cable and terminals will be required.

8. In order to ensure the protection of the cable from moisture, it is equipped with a special plastic tray.

9. The cost of such locks is determined in the ratio with the power of the magnet and the size of the device.

Thus, the installation of the code lock on the gate with your own hands is not a difficult process, for the quality execution of which it is necessary to adhere to all of the above instructions.

Installation of a code lock on the Video gate: