Installation of a door opening limiter

The door limiter is able to prevent excessive opening of the door, protecting the walls from scratches and blows. Having set a similar emphasis, you will forever solve the problems of peeling plaster behind interior doors or damaged wallpaper. In addition, such devices prevent premature wear of the door and door handle. With the help of the door opening limiter, you can maintain a peaceful relationship with your neighbors, because your door will no longer knock on the wall anymore and annoy them.

Content:

1. Installation of the floor restriction limiter
2. Installation of a wall -mounted door limiter

Installation of the floor restriction limiter

Among the entire assortment of the door opening limiters, the floor models are most popular simple, but at the same time practical products. As a material for the manufacture of door stops of this type, alloys based on aluminum and zinc, copper, as well as brass and steel are most often used.

Brass is characterized by high anti -corrosion characteristics, so the door accessories do not rust based on it and remains attractive for a long time. Another popular material from which the door fixers are made is stainless steel, which is known for its durability and strength.

The simplest door limiter can be made in the form of an ordinary pin, which is subsequently driven into the floor to limit the further course of the door leaf and its blow to the wall, as in the photo of the door opening limiter. Such pins can have different sizes and shape they are tall, low, flat, round, wide. It all depends on the installation site of the door limiter, door and other accessories, as well as the interior of the room.

The installation of the floor limiter of the door is recommended to be done in the following sequence:

1. Preparation of tools. When installing a door opening limiter, you will need such tools such as a punch, a regular drill, a screwdriver and a pencil. When purchasing a stopper, you need to check whether a special screw and a dowel for fixation are included in the kit for the door lattice.
2. Choosing a place for doorstands. The most important thing in the process of this work is to choose the right place where you will fix the limiter. To do this, open the door and fix this position of the door so that 5 centimeters remain from it to the wall. At the same time, make sure that the distance from the door to the wall is not less than the length of the handle, since in this case the door stop will not be able to interfere with the beating of the door against the wall. When determining the installation point, it is also necessary to take into account the purpose of the room if you install the restriction at the opening of the interior door in the passage room, it is better to fix it as close as possible to the wall and no further than the middle of the door leaf. It is not recommended to install the door stop close to the base in order to avoid when the door hit on the lock of damage to the loops.
3. Marking. After that, you can start marking. To do this, mark with a pencil on the floor the future placement of a door limiter. Before you install it, you need to check everything again. Now you can safely close the door and start making holes in the floor.
4. Fillation of holes. In the floor, it is necessary to drill 2 holes: one under the fixing dowel, the other for the pin. If you have a wooden floor, then it will be easy to do it, with a concrete floor you will have to suffer more. It will be the most difficult to make a hole in the flooring of the tile, because during the drilling a piece of material may break, so it is desirable that the fastening falls into the seam of the tiles.
5. Fasten the restriction of the angle of the door open. After making holes in one of them, the dowel is clogged, and the door limiter is put in place. At the same time, it is worthwhile to look carefully so that the pin (guide finger) occupies the second hole. After that, you can fix it with a screw through an existing hole. After installing the stop, it is recommended to make sure that it prevents the door touching with the wall or furniture.
6. Varnish coating. In order for brass limiters to maintain shine and radiance, and also do not darken over time, it is customary to varnish them.

Installation of a wall -mounted door limiter

A wall lock for the front door of a private house will be useful in the following case. Often the owners of the house want the front door to be open for constant ventilation. However, the door in the open position will not be able to be for a long time, as it will be constantly closed by the wind. Here the latch comes to the rescue. At the bottom, the limiter cannot be installed, because households will stumble about him. Therefore, it is more advisable to make a lock at the top of the door.

A homemade angle limiter when opening it fixes the door open at 90 degrees and does not allow it to open more. It is easy to make a door opening limiter from two plywood stripes that have a 3 centimeter width and the same length. One part of the latch is attached to the door box, the other is attached to the door leaf. Both components of the limiter are interconnected.

A steel corner is inserted at the place of their connection, which prevents the folding of the device and slamming the door. The fixer to the door is mounted using a corner, which is tightened to the door tightly with a self -tapping screw. The lock to the corner is attached freely. By analogy, the latch is attached to the box.

The principle of operation of a home -made restriction at the opening of the front door is this. When the door is fully opened, the latch will bend in the opposite direction by inertia. And if suddenly the limiter does not arise, then you can slightly push him with your hand. If the door begins to close from the wind, a home -made limiter begins to fold in the opposite direction, but the corner that is installed at the fold of the fold will prevent the complexity, and the door will not be able to close. To close the doors, when you leave somewhere or at night, you should bend the lock with your hand, and the door closes without problems.

Thus, no matter how beautiful and durable the door does not seem, it acquires true functionality with the fastening of such a door accessories as the door opening limiter, which is a device for the greatest convenience of using the door.