Niche for gypsum cardboard curtains: how to make a convenient and attractive device with your own hands

Ceiling niche optimal solution of the cornice for curtains. The box allows you to hide unattractive fasteners, visually expand the space of the room and the area of \u200b\u200bthe window, use additional backlight. To create a niche, drywall the material is usually used and easy to process. With the help of GKL, you can equip a box of any form all depends on the purpose of the niche and the imagination of the designer.

1. Niche purpose for placing curtains
2. Varieties of niches for drywall curtains
3. We build a niche with our own hands: the procedure
   • Calculation of dimensions and a sketch
   • Materials and tools
   • Preparatory actions
   • Assembly and mounting of the frame
   • Metal base and finish sheathing
4. Recommendations for decorating a niche: photo ideas

Niche purpose for placing curtains

In an apartment with a fresh repair, I want everything to have perfect furniture, decor elements, walls and floor design, the illumination system harmonized among themselves. Equally important in the general perception of the interior will play curtains and cornice.

Many people prefer to hang the whole side at the window with curtains and curtains, installing the ceiling tire. However, such cornices are often knocked out of the overall picture of the room. One of the most convenient methods for decorating the tire is niches from GKL sheets. A compact design can be built independently.

The purpose and features of the niche for curtains made of drywall with your own hands:

1. The box creates a certain illusion of increasing ceilings, the curtains seem to go out of nowhere. The visual effect is especially noticeable with stretch glossy ceilings.
2. A neat addition to the window opening, regardless of the style of the interior.
3. The niche hides the cornice itself and the power control unit.
4. The ability to arrange unusual backlight in the window area.

A niche for curtains can be recreated on a false floor or right on top of the floor slab. Any option does not require special capital investments, and we are fully implemented with your own hand.

Varieties of niches for drywall curtains

The primary question is the choice of the type of niche. The procedure for the manufacture of a plasterboard structure in almost all cases is the same, with the exception of some nuances. Conditionally, all ceiling niches can be divided by the following signs:

• depth;
• width;
• the form;
• location.

Depth. A shallow niche is equipped with light tulle, which do not require massive cornices. If in the future it is planned to supplement transparent curtains with heavy curtains, then it is better to immediately make the structure deeper.

The height of the box, as a rule, does not exceed 15-20 cm. This is enough to hide the cornice, fasteners and the supply mechanism.

Width. The parameter largely depends on the dimensions of the room. In a spacious room, wide structures of up to 30-50 cm look appropriate. Such a scope allows you to equip point lighting along the box.

A compact room requires a narrow niche, which visually will not overload the space. To decorate the cornice, there is enough baguette with a width of 10-15 cm. Reduced dimensions allow you to place the LED tape in the niche, you will have to refuse point lamps.

Configuration. The shape of the box is distinguished by direct and curved niches. In figured structures, the side adjacent to the window is made even, and the opposite part of the curved.

Place of installation. The placement area depends on the purpose of the niche:

• the window is the most popular design for decorating the cornice by the window;
• an in -room ceiling ledge with a curtain is used to zoning the room.

We build a niche with our own hands: the procedure

We will analyze the main sequence of work in the manufacture of a niche for curtains from drywall with our own hands. For an example, take a simple co -finished design of a straightforward shape.

Calculation of dimensions and a sketch

When determining the dimension of the niche, it is necessary to take into account a number of important nuances:

• the curtain suspension should be placed so that the folds of the fabric do not hurt the edges of the window sill and the radiator must take into account the width of their bulging from the wall;
• it is advisable to foresee that the window sash in the ventilation position does not contact with the curtain;
• between the folds of the curtains, tulle and the partition, there should be a small gap of about 1-2 cm;
• in advance, it is necessary to provide a place for fixing the LED backlight.

Advice. You should not strongly save the inner space of the box, otherwise it will be difficult to work with a screwdriver when erecting the frame

An example of calculation. Suppose there is a two -row cornice for the curtain and tulle. The radiator protrudes 16 cm from the wall. The windowsill is narrow, its end is located in the same plane with the wall. It is necessary to add at least 2 cm by 16 cm.

If the windowsill overlaps the battery, then it is its edge that is taken as a starting point. To the size of the protruding part, add the width of the cornice and additional 2 cm. If the window is decorated with lambrequins, it is necessary to add their width of the folds.

Materials and tools

To build a niche in a dry room, ordinary drywall is suitable, it is better to use moisture -resistant sheets in a wet room (kitchen, bathroom). In addition to the lining panels, you should prepare:

• guide profiles 28*27;
• ceiling profiles 27*60;
• tape for processing joints;
• putty;
• antiseptic, overwhelming the development of mold;
• a primer of deep penetration.

The necessary tools for making a niche for curtains from drywall with your own hands:

• punch;
• drill and drill;
• plumb line;
• building level;
• master OK;
• sandpaper;
• roulette, pencil;
• construction knife for cutting GKL;
• scissors for metal cutting profiles;
• a roller, a brush seizure of joints, applying a primer.

Preparatory actions

The peculiarity of the preparatory stage of the manufacture of a niche for curtains from drywall with your own hands is to clean the work surface and properly marking.

Pre -remove the curtains, dismantle the existing cornice, all protruding elements and check the evenness of the ceiling. The area adjacent to the window must be primed with a mold from mold.

Making a sketch for a niche for curtains from drywall with their own hands is carried out in accordance with the calculated dimensions, observing the proportions. The figure displays: the length of the adjacent wall, the height and depth of the box, the location of the lamps.

The next stage is the marking of the surface. Procedure:

1. On both walls, mark the points of the edge of the future niche.
2. Connect the points by drawing a flat line parallel to the window opening. For drawing, you can use a painting thread.
3. In parallel of the marking, mark the inner border of the box, retreating the width of the niche from the outer line.
4. The height of the frame is displayed on the lateral walls from two horizontal lines, the verticals are carried out, their length corresponds to the final height of the box.

Assembly and mounting of the frame

The construction of the frame metal base under the niche can be divided into several stages:

1. On the ceiling along the marked parallel lines, attach the guide to the UD profile. For fixation, dowels are used, the fastener step is 40 cm. When installing on a wooden base, ordinary screws are suitable.
2. The CD profile is fixed to the lower ends of the guide rails.
3. The width of the CD profile is standardly 3 m. If this meter is not enough, it is necessary to grow the ceiling rail. Two segments are interconnected with special inserts, fixing them with self -tapping screws.
4. To give the niche volume, vertical jumpers from the CD profile are mounted. First, they install one support near each wall, check their evenness and pull a landmark for the next jumpers between them. The step between vertical rails 60 cm.
5. If the width of the cornice is over 30 cm, then to give the stiffness of the design, horizontal jumpers must be installed, this will protect the drywall from sagging. They are attached to the ceiling plate using suspensions or fixed to the installed longitudinal CD profiles.

Important! Metal racks and ceiling runs are cut into metal scissors. In the process of assembling the frame, you must constantly control the horizontal and vertical of the box by a construction or laser level

Metal base and finish sheathing

The next technological stage of drywall cutting. On the sheets, the cut lines are marked, given that the lower side of the niche should overlap the end edges of the vertical sides.

A good stationery knife is suitable for cutting, to form holes for lamps, you can use a sharply created hacksaw.

Advice. To get the perfect cut, it is better to use the flight. Cutting out the paper layer, it is necessary to hold the tool in one position, the knife is carried out strictly perpendicular

When making an incision, it is necessary to completely cut out the paper layer and capture part of the gypsum. After that, it remains to break the GKL along the line of the incision.

Mounting technology:

1. Apply pieces of the canvas to vertical racks and screw with self -tapping screws, a step of fastening 10 cm. The hat hat should be drowned slightly in the GCL.
2. After the lining of the sides, fix the drywall sheet from the horizontal part, capturing the ends of the racks. The canvas should not go beyond the elements of the frame.

When the box is assembled, they begin to finish it. Squeezed of work:

1. Fill joints with a thin reinforced net, and then putting them in. Apply a putty to self -tapping screws, comparing the layer with the plane of GKL.
2. After drying, wipe the seams with sandpaper, primed the surface of the niche.
3. Perform the decorative decoration of the box in accordance with the interior of the room: paste the wallpaper or paint.

If the backlight is planned in the niche, then the wires are laid from the inside of the box even at the stage of the construction of the metal frame. After decorating, the plafones are inserted or the LED tape is connected.

Recommendations for decorating a niche: photo ideas

The hidden placement of the curtains is appropriate in any interior, regardless of the style of its feed.

Destroyed minimalism. Lack of extra details The main idea of \u200b\u200bdecor. The hidden cornice for the entire length of the window clearance solves two problems at once: the maximum fullness of the apartment with light and the visual expansion of the space.

Classics of the genre.The niche for the cornice is part of the suspended ceiling from GKL. Two -level transitions are skillfully beaten backlight. Exquisite lambrequins and tulle are decorated with a relief ceiling baguette.

Modern interior. A figured box frames the perimeter of the ceiling. The room has quite compact dimensions and a small height, so the optimal solution is a black niche with spotlights. The configuration of the box fully repeats and emphasizes the non -standard shape of the room, the mowed wall attracts attention. The cornice is delicately decorated, the interior is not overloaded.

The luxury of the hall. The glossy ceiling coating creates glare. This game includes linear backlight and spotlights. The milk-beige interior is diluted with darker elements: wallpaper inserts, a chest of drawers, an armchair and chocolate tiles at the window. The overall picture is harmoniously complemented by light curtains and curtains.

Textile decoration. The original idea of \u200b\u200bdecorating the head of the bed is drapery and backlight. The same technique is used to accommodate curtain nicks by the window. In this case, the role of the niche is played by the lower level of the ceiling that occupies the main area. The variety of textiles in the interior of the bedroom brings additional notes of comfort and comfort to the room.

Niche for curtains is a popular solution for decorating cornices and planks. Its construction can do any home master, work will not take much time and will not require large financial investments. The result will delight the most demanding critics of the curtain acts as a single tandem with a stylistic idea of \u200b\u200bthe interior.

Niches for gypsum cardboard curtains with your own hands: video