How to correct the ceiling plinth correctly

The ceiling baseboard performs not only a decorative function, visually separating the walls from the ceiling, but can also hide the joints of various finishing materials of the ceiling and walls. Not every interior design involves the use of ceiling plinths, but most often the overall view of the room seems incomplete without it. In the fastening of this element, there is nothing complicated, almost all types of skirting boards are attached to glue. But the question of how to correctly cut the ceiling baseboard in the corners of the rooms can focus many. After all, even in the simplest room there are internal corners, where the planks of the ceiling skirting boards must be accurately and beautifully joined. And in a more complex configuration of the room, the skirting board will also have to dock, performing the external angle. In this article, we will consider various options on how to cut a ceiling plinth using improvised tools and without them.

1. How to cut the angle of ceiling plinth using
2. How to cut the angle of ceiling skirting boards using marking on the ceiling
3. How to cut a ceiling plinth using a stirl
4. Impromptu tray-growing with your own hands

To begin with, you should figure out the question of how to cut a ceiling plinth, the answer to it depends on the material from which the filler is made. At the moment, ceiling skirting boards made of polyvinyl chloride (PVC), polystyrene foam (foam), polyurethane and wood are being sold.

PVC ceiling skirting boards are the cheapest. Dents and creases are easily formed on them, which cannot be eliminated, so the product has to be thrown away. Also, their disadvantage is electrostatic ability to attract dust. You can cut them with a sharp construction knife or hacksaw.

Ceiling plinths made of polystyrene foam Also belong to cheap. This material is very fragile, it is easy to crumble during processing, so it is necessary to cut polystyrene foam with a sharp knife or a hacksaw for metal, without making too strong pressing efforts.

Ceiling plinths from extruded polystyrene foam A little more expensive than polystyrene polystyrene, denser and more difficult to cut. Nevertheless, they crumble less, therefore it is easier and more convenient to work with them. Cut by a construction knife and a hacksaw for metal.

Ceiling skirting boards from polyurethane are the most expensive at the moment. They are durable, elastic and moisture resistant, easily cut by a construction knife and do not crumble. The disadvantage of polyurethane skirting boards is their dependence on temperature changes. For example, over a gas stove, a polyurethane baseboard will acquire residual deformations and begin to crack slightly. If you try to process or cut such a plinth, it can bend or deform in another way.

Wooden ceiling skirting boards They are dense heavy products that can only be cut with a hacksaw, preferably with small frequent cloves. You can also use the canvas for metal.

Before moving on to the listing of ways to correctly cut the ceiling baseboard, I would like to note that there is an opportunity not to cut the skirting board with particular accuracy. There are on sale special corner elements, into which the edges of the plinth are inserted. In this case, the plinth bar is enough to cut at an angle of 90, and the corner element will hide all the flaws. But this method is not always used, since the dimensions of the corner elements are slightly larger than the skirting boards themselves, so the angles in the room will stand out against the general background. Sometimes it may look like a nailed. Nevertheless, if the design of the room allows you to use corner elements for ceiling skirting boards, it makes sense to use them. Further instructions are useful to those who still decided to accurately cut the baseboard under a given angle.

How to cut the angle of ceiling plinth using

A simple carpentry tool was knocking, allowing you to cut the workpiece at the required angle. Most often it is a tray of plastic, wood or metal with vertical slots for cutting at an angle of 90 and 45. There are also more complex designs for cutting at the angles of 90, 60 and 45 degrees. For more professional work, a knock is used with a rotary mechanism, where a hacksaw can be fixed at any angle to the workpiece.

How to cut a ceiling baseboard using the inner angle:

• We apply the baseboard to the ceiling, measure the required length.
• Then we install the plinth bar into the knock so that the position coincides with the position of the baseboard on the ceiling.
• The plinth bar should be pressed to the far wall.
• Keep the baseboard with your left hand.
• We select this position of the hacksaw, when the angle is 45 degrees and the knife handle draws together as possible to the left hand.
• We cut the workpiece without making excessive pressure at the saw.
• The next step is pruning to the response plank of the plinth. We also install it to the far wall.
• Press and hold with your right hand.
• We select this position for a hacksaw, when the angle of 45 degrees and the knife handle draws closer to the right hand.
• Cut the skirting board.

Next, we join the cut planks of the skirting board and check the accuracy of cutting. For a more accurate orientation, they also say that in order to perform the inner angle it is necessary to start cut from the front of the skirting board. After pruning, wooden skirting boards will most likely have to fit a file.

How to cut off a ceiling plinth using the external angle:

• In order not to make a mistake with the dimensions, it is better to start with the marking of the inner corner, and then cut out the outer angle. Otherwise, a situation is possible when the bar may not be enough in length.
• It is necessary to attach the bar to the ceiling and outline the dimensions.
• Install the bar of the ceiling plinth and press it to the nearest wall.
• Hold it with the left hand and select the position for a hacksaw at an angle of 45 degrees when the handle comes together with the left hand.
• Cut off the workpiece.
• We set the response bar to the nearest wall, hold it with the right hand.
• We install a hacksaw at an angle of 45 degrees when the handle comes together with the right hand.
• We cut off the workpiece and join the angle.

The pruning of the workpiece with the help of the junction is suitable only if the angle between the walls of the equal is 90 degrees. If accuracy leaves much to be desired, you will have to use other methods.

How to cut the angle of ceiling skirting boards using marking on the ceiling

The marking of the skirting board on the ceiling also allows you to cut off the angle evenly and accurately. The only disadvantage of this method is that it is difficult and inconvenient to hold the strut of the baseboard on weight during cutting. Otherwise, it is possible to outline the angle for cutting even more accurately than in other ways. Applying the baseboard to the installation site, all the flaws of the walls and deviations in the size of the angle are immediately taken into account.

Cutting the corner of the ceiling skirting board:

• First of all, two blanks must be cut at an angle of 90 degrees.

• Then we put one bar first, resting its end against the perpendicular wall. We draw a line on the ceiling that outlines the circuit of the baseboard.

• We remove this bar and apply the response bar, also resting its end into the wall. We plan the line.

• The intersection point of the planned lines will be a mark according to which it is necessary to cut the baseboard.
• Again we apply each bar one by one and mark the cut point on them.
• We draw a line from a given point to the other edge of the skirting board.

We cut off the baseboard along the intended lines, join them and apply them to the installation site. Please note that with this method it is more convenient to cut the internal corners.

How to cut a ceiling plinth using a stirl

Something reminiscent of a knock can be done if you apply the necessary angles of cut on paper, cardboard or wood. It is necessary to draw two parallel lines, determine the center, and then postpone the necessary corners using a transporter. The advantage of this method is that you can put off any angle, including more 90 degrees. Of course, before cutting the corners of the ceiling plinth, it is necessary to check the angle between the walls with the help of the corner in advance and measure the transport.

The technique of cutting a ceiling skirting board using a painted rode was exactly the same as with the help of the stir. We press the plinth bar to one of the parallel lines, then install the hacksaw at the right angle, which is already outlined and cut off.

Impromptu tray-growing with your own hands

It is also not difficult to make a knock with your own hands.

Method 1.Three wooden strips or boards will be needed, which must be made in the P-shaped box. Then, the necessary corners are outlined on the walls of the box, and a cut is performed with a hacksaw. The result should be a wooden knock in which the grooves are cut out.

Method 2. A combination of impromptu bunks and a template with the planned lines. For the convenience of cutting, it is necessary to build something that it will be convenient to hold the bar of the ceiling plinth, since it is difficult to keep it on weight. It is enough to put together from two wooden strips or boards of a corner. On paper, you need to draw lines with angles for cutting at 45 degrees or under any other. Then we attach the plinth to the corner, press it with your hand, as described in the technology of using the stir, we move a piece of paper with the template to the edge where we are going to perform a cut and cut off. In the process of cutting, we focus on the line drawn on paper.

Method 3.As an impromptu, you can use anything you want, everything is that we form an angle. For example, a table moved to the wall.

Important! Pay attention to the rule of measurements for pruning the ceiling plinth. To outline the inner angle, it is necessary to measure the length directly from the corner. To outline the outer angle, it is necessary to navigate that the baseboard will protrude deep into the room at a distance equal to its width.

Do not consolidate the planks of ceiling skirting boards before they cut the response bar and tried on their location. Only after the two response planks came perfectly in the corner, you can begin to fix them to the ceiling. Small flaws can be finalized with a file or a file in the case of wooden and polyurethane skirting boards. To fit the foam products will have to be wielded with a sharp knife.

If suddenly, even after fitting the skirting boards between them, a small gap remains, do not despair, it can be closed with a putty. It is not difficult to cut the ceiling skirting board yourself. But in order not to spoil a lot of products, it is better to practice in small blanks.