How to prepare a plinth for painting with your own hands

Quite often, the repair in the room ends with the installation and painting of skirting boards. The baseboard allows you to finally arrange the room and give it a certain attractiveness. There are several options for skirting boards installed both on the floor and on the ceiling. We learn about which paint to paint the skirting board and the features of this process.

Table of contents:

1. Floor plinth for painting: types of floor skirting boards
2. Skirting board for painting floor: technology for staining floor plinths
3. Dicked out wooden skirting board - painting technology
4. What paint to paint skirting boards: the causes of paintwork painting
5. How to paint a foam plinth

Floor plinth for painting: types of floor skirting boards

The skirting board plays the role of not only the aesthetic element of the room, it also performs a certain functional load. So, the installation on the floor of a wooden coating requires in arranging a compensation clearance that is hidden behind the baseboard. The absence of this gap leads to deformation of the flooring.

With the help of a plinth, it is possible to hide certain communications that spoil the appearance of the room. The skirting board is a transitional element from the ceiling to the walls and from walls to floor, it creates a certain harmony of color.

There are many options for floor skirting boards that differ in shape, color and material.

The first version of the floor plinth is the most popular and ancient. A natural tree is used for its manufacture. There are many options for wooden skirting boards, various price categories, quality and breed. A wooden baseboard implies its coloring in a certain color or varnish. Periodically, a wooden skirting board is painted during operation.

Open -type skirting boards - has a wooden base and decorative coating. To protect the veneer, its surface is covered with melamine film. Openced baseboard is less expensive than wooden, but it is stable before moisture and temperature fluctuations.

The easiest to maintain and install skirting boards made of plastic. It is approached under the carpet, laminate and linoleum. Most plastic skirting boards in texture resemble wood, but have higher performance. Such skirting boards differ in the presence of special channels, inside which you can hide wires.

The skirting board from MDF is installed on a flat wall, consists of a special bar, which has high mechanical strength. A paper base is applied to the surface of the bar, forming the color and texture of the baseboard. This version of the plinth is characterized by environmental friendliness, resistance to temperature changes, hygiene.

The skirting board for aluminum flooring in residential premises is rarely used. Its use is relevant in industrial institutions. This version of the skirting board is high -strength, hygienic and has a long service life.

The polyurethane version of the floor plinth is widely used. He is not afraid of moisture, so it is great for kitchens and bathrooms.

The skirting board is flexible for painting from polyurethane is distinguished by good operational characteristics and is easily mounted in the room, repeating its shape. Due to the flexibility of polyurethane skirting boards, he is able to hide the largest irregularities in the walls. In addition, the products are characterized by the presence of grooves, inside which the wires are installed. Among the advantages of a flexible baseboard for painting, we note:

• ease of product weight;
• simple and quick installation;
• resistance before mechanical loads;
• resistance before moisture and temperature fluctuations;
• Using in various for its intended room: both in the bathroom and in the bedroom;
• The possibility of independent staining.

Skirting board for painting floor: technology for staining floor plinths

Not every of the above options for floor skirting boards is suitable for painting. Some models are sold ready for installation and do not need to apply additional finishes.

Most often, the room uses skirting boards from a fine -fractional tree fraction, such products are sold both painted and unpainted. Buying a skirting board for painting has a lot of advantages, such as:

• ideal surface smoothness;
• the presence of a layer of primer, which provides additional protection of the baseboard;
• high level of unchanged strength;
• the ability to repaint the product in the desired color;
• ease of installation;
• The junction of the joint between the floor and the wall.

The process of staining the skirting board is quite complex and begins with the choice of a suitable color. When choosing the color of the plinth, take into account the color of the floor and walls, the shade of furniture in the room, the size of the room, the design, the main and additional lighting.

We offer to get acquainted with the recommendations that will help you choose the right color of the floor skirting board:

1. Color the baseboard in tone with the ceiling or floor. Using this move, it is possible to increase the room in volume.

2. If the room has low walls, then the baseboard should be painted in the tone of the wall, so the walls will seem higher.

3. Another option is to paint the skirting board in the color of the door box, thus, it is possible to harmoniously connect them with each other.

4. If light and discreet tones are used in the decoration of the room, then you can paint the skirting board in contrast and bright color. Thus, it is possible to achieve focusing on this element.

For the manufacture of MDF wooden skirting boards for painting, plywood and a layer of paper are used. The presence of melamine coating provides protection of the baseboard from moisture and other stimuli. This version of the plinth is easy to install and care. There are options for MDF plinths with an already applied pattern or for painting.

There are two options for MDF plinths for painting:

• light gray;
• The baseboard is white for painting.

We offer to get acquainted with the technology of applying paint on floor skirting boards from MDF:

1. The coloring of the skirting boards is carried out only after the installation work is performed. In order to prevent the coloring composition on other surfaces, pushes them using painting tape.

2. Before starting the staining of the baseboard, make it grinding with sandpaper with fine granularity. Thus, a pile will not rise on the surface of the panel.

3. Next, apply a primer layer to the coating and wait for its drying. Apply another layer of primer, which will give the surface of smoothness.

4. For painting the baseboard, use a standard brush, the size of which directly determines the size of the skirting board.

When choosing a coloring composition for skirting boards, pay attention to its components. For internal work, we recommend that you give preference to paint on a latex, waterproof or acrylic basis. After applying the soil to the surface of the baseboard, proceed to stain it. To perform work, the availability of:

• Directly plinths;
• paints;
• gloves;
• brushes;
• polyethylene films;
• containers under water.

Install a polyethylene film on the floor. Dress gloves start painting the skirting board. Do the work carefully, apply paint evenly, thin layers. Wait for the first layer of coloring composition, and repeat the above actions again.

Dicked out wooden skirting board - painting technology

For the construction of wooden skirting boards, a wood massif is used. This material is characterized by high strength, environmental safety and a long service life. Before starting work, a primer in two layers is also applied to a wooden baseboard. It will reduce paint consumption and increase the clutch between the tree and the coloring composition.

With simultaneous staining and wooden floor and baseboard. First, it is recommended to paint the baseboard, and after the floor. In the working process, make sure that the paint does not drip to the floor.

In order to avoid the appearance of flows under the extreme part of the baseboard, a spatula is substituted, and staining is performed using a narrow brush.

If the floor is not painted, it is recommended to protect it and the walls with a painting tape. In order to get a high -quality coating that will serve you for many years, apply paint to the baseboard with a thin and uniform layer. Coloring with a large amount of paint will lead to bloating and deformation of the coating. After applying each layer of paint, wait for its complete drying, before applying the next.

Painting a wooden baseboard is an optimal solution for cases when it is not possible to find a skirting board of the desired tone.

What paint to paint skirting boards: the causes of paintwork painting

Ceiling skirting boards are most often released in light color, if there is a light ceiling in the room, then they harmonize quite well with it. Therefore, there are supporters of such an opinion that the skirting board for the ceiling on foam, polystyrene or polyurethane basis does not need to be painted.

However, these options for skirting boards need painting, even white, there are many reasons for this. Let's get acquainted with some of them:

• On these variants of skirting boards, there are often small defects in the form of dentes, scratches, which in daylight become noticeable, staining can correct this drawback;
• The foam has a loose structure that is visible, its coloring gives the skirting board more solidity and improves its appearance;
• Dust accumulates better on unpainted material, and over time it turns yellow;
• To clean the colored skirting boards, it is enough to wash them with a damp cloth;
• In addition, it is with the help of paint that it is possible to hide the corner joints between the skirting boards;
• skirting boards made of wood are also painted, paint provides their protection and external factors and improves the life;
• With the help of paint, it is possible to create a skirting board of any shade that harmonizes with the room.

The process of staining the baseboard in an unidentified form is more convenient. However, in this case, after the installation of skirting boards, the joints between them will remain visible. Yes, and there is a risk of plinth pollution when performing installation work. Therefore, most often skirting boards are painted after their installation on the wall.

When the color of the skirting board and the ceiling coincides, they are painted simultaneously. At the same time, it is better to do this after performing the final wall decoration in the room. Before applying the coloring composition to the surface of the ceiling baseboard, it is recommended to cover it with a primer. It can be applied before fixing the skirting boards on the wall.

A rather important issue is the choice of a coloring composition for the finish of the skirting board. To paint the baseboard for painting you need to paint with a water base. Foam, polyurethane - destroys alcohol, solvents like White Spirit and other aggressive substances.

Therefore, it is recommended to use paints that have an acrylic, latex or water base for staining plinths. If the staining of the skirting board still occurs before its installation, it is allowed to use paint in the spray can. Thus, it is possible to speed up the workflow. If you need to paint a certain color, but could not find it in the store, you will have to hair the coloring composition yourself.

How to paint a foam plinth

Before painting the ceiling baseboard, it is necessary to prepare the surface for work. Eliminate the defects between the connected parts in the corners, get rid of scratches and dents.

For these purposes, we recommend using putty or special sealant. If a wood skirting board was installed on the wall, then a special putty is used to finish it for working with wooden surfaces.

In general, before the application of paint on the skirting board, perform the following actions:

1. Stock yourself with a sponge or soft rag, a container with water and a rubber spatula. Using a spatula, distribute the putty at the junction of two skirting boards or at the site of defects on the surface of the baseboard.

2. To remove excess putty, use a sponge moistened in water. In the presence of joints between the skirting board and the wall, also fill them with a solution of putty.

3. Wait for that, completely drying the putty composition, polish the surface with special devices.

4. After that, proceed to the execution of the staining of skirting boards.

The process of painting the baseboard is quite simple if all technological aspects of its conduct. The nature of the work is determined by the stage of staining, whether this process is final in the decoration of the room, or then the wallpaper will be glued to the wall. At the initial stage of work, it is necessary to clean the skirting board of dirt and apply a primer layer on it.

If the baseboard is painted before finishing work on the ceiling and walls, then in this case, it is preferable to use a spray can. The work will pass faster and take little time. If the baseboard is painted after wall decoration, then on the wall and on the ceiling, if necessary, a painting tape is installed that prevents the hit on them.

If, nevertheless, the paint hit the wallpaper, then to remove it, it is necessary to use a wet rag or sponge. If you can’t stick the painting tape on the wallpaper, then use the proposed option for painting skirting boards below. Take a wide spatula and install it to the baseboard from the wall. Stain the plinth sections gradually, moving the spatula. After covering the skirting board for the first time, wait for its complete drying and repeat the process one or twice.