Ursa wall insulation: Mineral wool based on fiberglass

Everyone sooner or later faces the problem of insulation of the house. Due to a huge number of drafts and heat loss, it is quite difficult to maintain the necessary temperature in the room. An ideal option for maintaining heat in your home will be warming for the walls of Ursa. It is a mineral wool in rolls made on the basis of fiberglass. Thanks to convenient packaging, the installation of this material is very simple. One has only to promote a roll and fix the material on the wall.

Consider the basic properties of mineral wool, the main component, which acts as the basis for the insulation for the walls of KNAUF. Mineral wool has the appearance of fibrous material. It is obtained by adding organic matter to silicate rocks of rocks. The material acquires the main properties thanks to a chemical basis. It has a high opposition to the influence of chemical elements. It is hard to ignite. It can serve as a fire basis or fire -retardant insulation. Withstand a temperature of about 1000 degrees Celsius. Large thermal insulation depends mainly on the structure and binding of fibers. The level of heat treatment of insulation for walls with a thickness of 5 centimeters can be covered with a brick wall of 89 centimeters and a wall of wood of 18 centimeters. Thanks to the unusual structure, it has the ability to maintain its shape throughout the entire time of operation. The minimum term of use is 50 years. Does not lend itself to deformation under the influence of living organisms.

New from Ursa. As you know, when getting wet, the heat insulation level is reduced. The URSA concern has developed a special impregnation for its heater. The fluid on a hydrophobirizing basis increases the hydraulic -repellent properties of cotton wool. This allows you to pass water vapor through the surface without a trace. Thus, the company's products can be used in various rooms and at the same time not lose their main properties.