Square for the floor for screed: General advice

When warming the house, it is very important to predict the special attention of the floor. It is much more pleasant to walk on heat, so it is very important to choose the right insulation for screed. The warmth ongoing from below will create not only a pleasant atmosphere, but also reduce heat loss. There are ready -made floors with heating, but the huge price makes many people abandon such attitudes. An alternative option is to fill the cracks between the wooden coating with polystyrene foam, mineral wool, glassy or isolon. Such heater will lie perfectly for any screed.

We will get acquainted with the basic rule for the installation of insulators. The insulation for the floor for a screed in the shape of an insolon is covered in one layer and is connected using special adhesive tape. The side equipped with foil should look up. It is advisable to pass the film, a kind of waterproofing on the very base. The edges of the insulation material and films should go to the edges of the walls, so that after the screed, they were clearly visible. A mounting mesh is laid on top of the protective material. And only then a dry or liquid screed is produced. The installation of polystyrene foam, mineral wool and glass wools should be carried out in a similar way.

When choosing a suitable gasket, it is important to take into account the thickness of the material and the thickness of the screed. Remember that with an average material thickness of 10 centimeters and the average height of the screed of 40 centimeters, the height of the floor will increase by 50 centimeters. The space will be significantly reduced. So that your work is not empty, you should also clarify the characteristics of each insulation. It is he who will be subjected to a lot of load and can lose its thermal insulation qualities. It is important that one of the parties is equipped with a foil coating. Adhering to the main recommendations, your flooring will not allow you to freeze.