Installation of the door to the bathroom: step -by -step instructions

The equipment of a modern bathroom is largely different from the standard one, to which everyone is accustomed in Soviet times. And the design of interiors in rooms where a large amount of water is used has also passed a noticeable evolution. Doors to the bathroom, a mini-basin or bathroom are now selected in a single vein with plumbing and the rest of the equipment. But it is not so easy to choose and install a door leaf from a moisture -resistant laminate so that the doors meet all the criteria for the search.

Table of contents:

1. Features of the choice of door to the bathroom 
2. Features of the choice of door leaf
3. Materials for the manufacture of door to the bathroom
4. Installation of the door to the bathroom: step -by -step instructions

Features of the choice of door to the bathroom

At first glance, it seems that there is nothing easier to install the door in the bathroom, but this is a specific room with an increased level of humidity and a high probability of water penetration. The doorway should be tightly tightly closed at the bottom, and at the same time contribute to sufficient recirculation and air ventilation. It is these features that it is important to consider with independent installation of the door in the bathroom.

In urban apartments, a typical planning of the doorway has standard sizes. Therefore, the size of the door to the bathroom, when replaced with a new one, must accurately correspond to the previous sample. Additionally, you have to change the entire door frame in most cases, the design of the new door does not coincide with the old design of the doorway. You can use special solvents to remove the old layers of oil paint from the louds or purchase doors along with the box.

It is not recommended to put the first doors in the bathroom, especially decorative interior they can be crumpled from an excess of fumes and lose an attractive appearance. In a room with high humidity, it is best to choose a door leaf from a moisture -resistant laminate or other material that is not afraid of excess moisture:

• plastic;
• glass;
• aluminum;
• composite materials.

When installing doors in a bathroom, a home mini-basin or bathroom, it is important to take into account the height of the rock, which is made a little higher than in other rooms. This is important if someone forgets to close the crane in the bathroom or a water supply leak occurs. A high threshold allows you to keep the spilled water on the floor in the bathroom while the water supply is blocked. But the threshold should not be too high so as not to stumble.

Be sure to have a small gap between the door and the thorough or at the top of the door to provide an air flow for sufficient ventilation. Many people know how the air is saturated with steam after taking the bathroom, but the excess of humidity is poorly tolerated by people with diseases of the lung and cardiovascular system. It is for this reason that the bathroom valve of the supply ventilation is sometimes equipped or a sufficient gap in the doorway is left when installing the door to the bathroom.

In the city apartment, the door block of the bathroom is much already than in interior walls, and in private houses the thickness of the wall can be arbitrary. Remember that when buying a door frame, the structure should be wider than the wall at the entrance to the bathroom or bathroom. Standard parameters of the doorway 2.0 x 0.6m plus threshold. However, when buying, it is important to reveal everything thoroughly.

Features of the choice of door leaf

To make the right choice, first you should figure out what doors are and to choose the most suitable for your home. Remember that they should look good on both sides and harmoniously fit the design of the adjacent to the bathroom or bathroom. An example of decorative doors in a bathroom photo.

There are 2 types of doors:

• swinging (open on themselves and from themselves);
• sliding (move to the side and guide).

There are also single and double doors to be installed on a wide doorway.

The intensely single familiar type of door for the bathroom or bathroom, it opens aside by the handle. Most often, budget options for this type, and they are usually installed in city apartments. The choice remains with the material, the type of locking mechanism and the design of the door leaf. The swing door to the bathroom opens, most often outward into the corridor or the hallway, where there is enough space for this. Sometimes the door opens inside the bathroom, but there should be enough space there.

Also note that there are doors:

• rights;
• left.

Attention: this is especially important when there is little space in an adjacent apartment in an apartment or house. If there is another wall nearby, standing perpendicular, then the doors should not interfere with each other when opening.

Sliding doors to the bathroom, undoubtedly, save space, they are installed where it is inconvenient to use the swing door. Their installation is more complex, the price is higher, this is due to the expensive roller mechanism and the guide fixed in the floor. Most often, their installation is trusted to specialists. When opening, such doors move along the wall.

Any interior door should harmoniously fit into the overall design of the interiors, so when choosing the style of interiors for the bathroom, it is important to observe a reasonable balance. If the style of the design of the interiors of the bathroom and the adjacent room does not radically coincide, then it is better to opt for a neutral version with a modest decor.

Attention: a door made of ordinary, not moisture resistant materials, from the bathroom, it is necessary to cover with a special waterproof varnish or treated with a special composition that increases its resistance to moisture evaporation!

The natural wood when installing the door in the bathroom pre -soak the antiseptic and a special antifungal composition, especially if it is from an array! A special composition is also impregnated with veneered interior doors, as well as from chipboard and MDF. This is especially important if the doors for a bathroom or bathroom are made with your own hands for a special order.

Tip: If you want to order a door for artisanal production in a small private workshop, be sure to ensure that it is covered with all means of protection. It often happens that the money was paid, and the work was not completed by any impregnation and special protective processing was carried out.

When choosing a door, also pay attention to the locking mechanism, since the mounted latch tends to close from the inside, do not confuse! If the handle is not provided, there must be a sping or other internal castle.

Materials for the manufacture of door to the bathroom

1. Plastic doors for the bathroom are very convenient and aesthetic, although they have not become large for this type of premises. They are most appropriate for rooms with high humidity. It is easier to care for them to wipe it when the moisture is placed. They are convenient and reliable, least affected by adverse effects. These are very light doors, so they can also be used for a sliding structure. They have an affordable price and practical accessories you will not have to invent how the doors should be closed to the bathroom.

2. Glass doors for the bathroom is a practical decorative option. Do not be afraid that they will break, only over -strength glasses are used for them. Care regularly wipe moisture. The glass door has an additional advantage, it passes a sufficient amount of light, even if it is opaque. This allows you to additionally save electricity when using the bathroom in the daytime. If it confuses that the doors can be transparent, then you can choose matte, mirror or corrugated glass: photo.

It also refers to inexpensive options, and you can even order such a door from thick matte or sandblasting in the nearest glass workshop. But do not forget to purchase special accessories in advance in advance, so that the glass designed all the holes for the handle, shut -off spinger and fasteners. The finished door made of decorative glass is much more expensive.

3. Laminated door and with a film coating or PVC excellent indicators in protection against moisture, spray, drops and evaporation. These doors are quite common, they are environmentally friendly and hypoallergenic, and due to their popularity they make up the lion's share of the assortment of doors for the bathroom and the bathroom.

Such a door is not deformed, very convenient to use and practical in care. Cleaning with a sponge with any detergent, wipe moisture with a dry cloth. The decorative properties of the door are also not in doubt, the surface copies any texture of natural wood. This is important for decorating the interior of related rooms in a single design and the prices for these doors are attractive. Budget laminated doors of the economy class are presented in a large assortment in all construction supermarkets and online stores.

4. Openced doors are a coating of wood-brown halva with a thin layer of decorative wood of valuable species. The furniture veneer is beautiful and reliable, the only thing that many manufacturers do not take into account is the practicality of such doors in a room with high humidity. But if a layer of protective high -tech impregnation or multi -layer water -repellent varnish is provided, then the selected model will be good for adjacent rooms and practical from the bathroom.

5. Doors from a natural massif (wood) are solid, reliable, but everything mentioned about the veneer is true for natural wood. You can only use a reliable protective coating in the bathroom. Such doors are expensive, they are not available to everyone, but they can be ordered in a carpentry workshop and follow all the stages of impregnation. When buying, it is important to familiarize yourself with the instructions or technical description in detail in order to make sure of the possibility of using a whole -rod door in a bathroom or bathroom.

Attention: in any construction store you should not be shy about asking what is not clear. It is better to contact consultants for receiving general reference information and a detailed description of the selected door. If the product is ideally like all the parameters for your bathroom, but a little longer, it can be shortened on a special machine and make a thawing. Check if they provide such a service in this store. It is worth asking how to install the door to the bathroom, do they have a home departure at home, is it included in the price of the door? If the doors intend to install yourself, make sure that you do not overpay automatically for their installation.

When installing the door, you need to consider whether this will be the first time after the completion of the main stages of building a house, or is it necessary to dismantle the old door? At the same time, the process and all stages of installation will be organized differently by installing the door in the bathroom at the end of the article.

There are several options for installing the door, but remember that the bathroom is definitely needed, and if it was not there, you should also familiarize yourself with this process in detail. It should be correctly mounted, and also get sufficient sealing. Teach that old doors are usually dismantled without a door frame, but if it does not coincide in style, and it is difficult to redo something, you will have to remove the entire structure, moreover, along with the threshold.

Tip: Wall defects are important to eliminate before installing the door frame, and unevenness and mismatch at the doorway can be closed with platbands or inpans.

Installation of the door to the bathroom: step -by -step instructions

This is a responsible and time-consuming process, regardless of whether it will be a door to a small bathroom or extensive repair of a large bathroom or home mini-basin. However, it is not recommended to experiment with this if there is no such experience and carpentry tools at hand.

When the door is bought with the box, the experts recommend gathering the entire structure on the floor and then install it in the doorway. You can purchase an already assembled option when it corresponds to your size of the doorway then the installation is much easier:

• prepare a doorway;
• install the finished design and wedge it, checking the level and plumbing, we fasten the wedges between the wall and the door block and the wall;
• fix the box in the doorway with anchors or screws;
• fix the design with mounting foam on one side and put the struts in the box so as not to deform;
• once again, checking the vertical of the structure is important when closing the door;
• after 2-3 hours, the first layer will grab, after which the installation foam is applied from the other side, cleaning the excess;
• seal the threshold from the bathroom;
• close the mounting foam external decorative elements of the door box;
• after a day, check the reliability of the installation of the box should not stagger, if this is noticeably necessary to strengthen the mount to the wall.

Attention: when setting, the mounting foam increases fifthly, so it is better to apply it with slow portions until the space between the structure and the wall is increased. Experts recommend that the third space is to blame. If the faint crawls out in unwanted places, it can be cleaned with a knife and washed the surface of the finish with a bite solution.

If the door box does not require replacement, then the acquired door remains to try on the door box and hang on the hinges. They are fixed to the door leaf and the box with self -tapping screws. Typically, 2-3 door loops are enough, but they need to be correctly installed by making deepening the chisel watch the video.