DIY door handle

Wooden door handles for premises for various purposes are quite expensive. The high price is due to the use of manual labor and the original performance. The design itself is not particularly difficult, and you can make it yourself. The article indicates the advantages and disadvantages of wood models, as well as various technologies for creating door accessories with your own hands.

1. Features of wooden door handles
2. Choosing wood for the manufacture of a handle
3. How to make a door handle with your own hands: carved model
   • Tools and materials
   • Production and installation
4. A simple version of a wooden handle for a bathhouse
5. Door handle in Russian folk style
6. DIY wooden wooden handle
7. Installation of handles on interior doors
8. DIY Wooden Handles for Doors: Photos Ideas

Features of wooden door handles

Since ancient times, the hardware for the doors has been made of wood. Later, they were worthy of competition by metal products and elements made of modern materials. However, today, wooden models are widely popular due to their advantages:

1. High -quality polished and processed wood is pleasant to the touch. A handle made of wood is not as cold as made of metal or plastic.
2. Furniture of wood is indispensable when arranging baths and saunas. Wooden elements do not heat up to high temperatures, as metal, and the probability of obtaining a burn when contacting the handle is reduced to zero.
3. Simplicity of making handles for a doors made of wood with your own hands. The wood is easy to process, and working with it does not require expensive equipment. Using bars, slats or log cabins will be able to create a design of any shape.
4. Available cost.

Despite significant advantages, wooden products have some disadvantages:

1. The strength characteristics of wood are inferior to metal elements. This fact must be taken into account when erecting a structure that is subjected to significant loads. In this case, it is better to give preference to solid wood or metal.
2. With prolonged contact with metal surfaces, the tree is destroyed. Therefore, it is advisable to select door handles for doors in accordance with the material of the manufacture of the canvas.
3. In order for a handle made of wood for a long time, it should be carefully processed: polished and impregnated with protective compounds.

Choosing wood for the manufacture of a handle

Accessories mounted on the entrance doors should be made of strong wood. Some experts recommend using conifers, which, when heated, distinguish an aroma pleasant and healthy for a person. However, solid -faced breeds are no less in demand, characterized by an elegant texture pattern and good mechanical resistance.

Advice. The door handles are best made from deciduous trees so that there is no resin for capture in hand.

For the manufacture of handles on the door with your own hands are suitable:

1. Oak is characterized by strength, resistance to external influences and hardness. Oak products look respectable and noble, great for the arrangement of country cottages and apartments.
2. BUY A valuable breed, similar in many qualities with an oak. The wood has an unusual pinkish tint of a homogeneous texture.
3. The poplar has pronounced bactericidal properties, which is often used in the design of the steam room.
4. Linden has an anti -inflammatory and calming effect on the human body.

How to make a door handle with your own hands: carved model

Tools and materials

Creating a carved model of the door handle involves the use of the following materials and tools:

• wooden flat workpiece;
• a branch of an unusual shape;
• saw and electric jigsaw;
• mill and nozzles;
• drill;
• sandpaper or grinding machine;
• clamp;
• epoxy adhesive;
• heated;
• varnish.

Production and installation

The sequence of creating a door handle:

1. Clean the cut of the tree from the bark, polish and apply the contours to the workpiece. This will be the basis of the future handle.
2. Pass the contour and give the tree the necessary shape.
3. To give the texture of the workpiece, you can use the cutter by making recesses in the marked areas of a wooden cut.
4. Pull the side ends of the product, remove the chamfer from the edges of the workpiece.
5. The handle is made of an unusual bitch. Remove the bark from the branch and try on the handle to the base.
6. Cut the edges with a saw so that the ends of the handle are tightly contacted with the prepared workpiece.
7. Apply epoxy glue to the handle, press to the base and clamp the details of the clamp.
8. In the base of the handle, drill holes at an angle, grease with glue and drive them, thereby strengthening the structure. Sprinkle excess pegs.
9. Leave the pen for drying for one day.
10. Cover the product with varnish, wait for complete drying and install on the door.

A simple version of a wooden handle for a bathhouse

A homemade door handle will surprise the guests of the bath and will become the pride of the owners of the steam room. It will not be difficult to build a simple model. Consider an example of creating a handle with a length of 26 cm and a height of 10 cm. For work, you will need a board with dimensions of 26*10*5 cm, a simple pencil and an electrician.

The algorithm of actions:

1. On the sheet, draw a sketch of the handle. The drawing is easier to display in the cells. To conduct arcs and crooked lines, you can use a pattern or improvised round objects of a suitable diameter.
2. Transfer the contours to the tree and cut the workpiece with an electric jigsaw on them. To get a flat cut, it is better to use a file for cutting metal.
3. If desired, you can smooth out the shape of the handle and remove the chamfers, apply a pattern, a carved pattern or decorate the burner.
4. Attach the handle to the door with screws.

Door handle in Russian folk style

The copy of the carved handle harmoniously fits into the interior, designed in a traditional folk style. The handle will beautifully complement the door stylized under the old days. The design of the model includes 6 elements:

• base;
• intermediate bars 2 pcs.;
• cubes 2 pcs.;
• lever.

First you need to prepare separately each detail, fit them together and polish them. Production order:

1. Preparation of the base:
   • on the plank in size 36*9*2 cm, apply markings according to the drawing;
   • cut the corners and half -bunches with a jigsaw; If there is no such tool at hand, then the processing can be performed with a semicircular -shaped file.
2. Make intermediate cubes. In the planks with dimensions 6*2*2 cm, perform a longitudinal hole with a diameter of 8 mm. Subsequently, they are installed in them for assembling all elements into a single design.
3. Prepare cubes with a side of 4 cm:
   • drive and polish the block with a cross -section of 4*4 cm, about 10 cm long;
   • cut the beam into cubes;
   • in the resulting blanks, make two holes with a diameter of 8 mm on a horizontal and vertical axis.
4. Make a handle from a bar with a length of 15 cm and with a cross section of 3*3 cm. From the end sides, drill holes with a depth of 2 cm, a diameter of 8 mm.
5. Perform a decorative thread on wooden blanks:
   • Base. On the board, mark the contours of leaves, squares and crosses. Pierce the upper points of the ornament with the tip of the knife and cut the tree first on one side, and then on the other, forming equal widths of the groove. First, leaves are cut out, and then inner crosses.
   • Lever. The thread is performed on 4 sides with oblique lines with the same slope. The depth of the groove is about 3-5 mm.
   • Cubes and blocks are decorated with rhombics and zigzag lines.
6. The assembly is carried out using nagges planted on PVA glue. In this case, it is necessary to cover the surface of the holes with the adhesive composition and heated themselves.
7. Install the handle on the interior doors with your own hands using screws.

DIY wooden wooden handle

To make an accurate handle for interior doors, you will have to master the skills of working on a lathe. Creating such a model requires the use of the following tools and materials:

• a machine with a three -cup cartridge;
• oak bar;
• wood cutters;
• large and medium-grained sandpaper;
• wax mastic.

Sequencing:

1. Prepare the workpiece. The block of square section is slightly cut along the edges on one side. So, the rounded part is evenly fixed in the cartridge of the machine.
2. Insert the workpiece into the fists and with the help of a semicircular incisor to give it a cylindrical shape along the entire length.
3. To align the surface of the bar with the end of the incisor, holding it under a slight inclination.
4. The sharp edge of the incisor shall be shaped in the shape of the upper part of the handle.
5. Return some distance from the edge and grind the base, the back of which will fit the door leaf.
6. Turn the base of the handle with a straight cut, and treat the surface with sandpaper. When performing grinding, it is important not to overdo it and not to push too much on paper, otherwise you can burn your fingers on rotating elements and spoil the product.
7. Cover the handle with wax mastic. The product penetrates the pores of wood, protecting the material from external influences and giving the pen matte shine.
8. The cutter cut the handle from the rest of the unprocessed timber.
9. Perform the door handle.

In the process of manufacturing, some nuances should be taken into account:

• for processing, it is necessary to take material without cracks and knots, otherwise when rotating the workpiece can be split and injured;
• it is advisable to make several handles from one workpiece at once, since the accurate models have a small size;
• before grinding and impregnation with a protective composition, all minor cracks on the handle must be filled with putty designed for wood work.

Installation of handles on interior doors

The inserts of the handles in the interior doors with your own hands begins with the marking of the location of the accessories. According to the established standards, the standard door handle is mounted at an altitude of 80-100 cm from the floor (depending on the growth of the residents). The work is performed in the following sequence:

1. On the door leaf, mark the installation site, retreating from the edge of at least 6 cm.
2. Having put the ruler, draw a flat line through the end side of the door and continue marking from the back of the canvas.
3. Drill prepare a hole for the thickness of the door.
4. Repeat the drilling on the second side of the canvas. It is important that a deviation of the axis of the hole in horizontal or vertical does not occur.
5. Cut the niche with a chisel for the installation of a clicking mechanism.
6. Insert the latch and check so that its edge is in a single plane with a door leaf.
7. Bring two parts of the handle from different sides of the door and guides to pass through the hole. Tighten the structure with bolts.
8. Part the end of the box with a metal plate prepare a sample for a tongue and frame, try on and fix the plate with screws.

Over time, it may require a minor repair of the handles of interior doors with your own hands. Sometimes, so that the elements do not loosen, it is enough to tighten the screws with a screwdriver.

DIY Wooden Handles for Doors: Photos Ideas

The design design of door handles is striking in a variety of colors and design. The fantasies of the woodworking masters are embodied in bizarre forms, elegant bends and the stylistic performance of accessories for doors.