How to make a steam generator for a bath with your own hands. The basic principles of the device, features of installing a steam generator with your own hands

To form the required volume of steam in the bath, special equipment is used, which is called a steam generator or steam gun. Such a device can be purchased in stores, and if desired, do it with your own hands, having sorted out in detail the basic principles of the device, its types and features. Read about the features of the manufacture and installation of a steam generator with your own hands further in the article.

Table of contents:

1. Varieties of steam generators and their purpose
2. The design of the steam generator
3. Types of steam generators, stove or electric
4. What tools and materials are needed for the manufacture of a steam generator with your own hands
5. How to correctly mount a shower steam vehicle with your own hands
6. The choice of a suitable container, heating element for a steam generator with your own hands
7. Steam generator from gas cylinder features of manufacture

Varieties of steam generators and their purpose

A steam -former in a bath can function in combination with stove equipment, and also serve as an independent device. Very popular, this type of device, is used at the expense of all known the healing properties of steam, which well affects the general condition of the body, skin, etc. In modern stores, a wide range of various household and industrial steam generators is presented, which differ in dimensions, the method of water pouring, the power and type of water heating. Already ready -made models are equipped with a special control panel, which allows you to control the temperature of the steam, as well as the amount of its feed.

Industrial steam guns are intended to serve public -type baths. Household vapor -formers find their application in private baths, saunas and hammams.

All gaps are divided into automatic and autonomous. The former do not require regular, manual water filling, as they are equipped with automatic control and connected to the water supply system. The latter, on the contrary, require manual intervention, since there is no water supply. Autonomous steam generators have a more affordable cost and, as a rule, differ in overall, voluminous thickets for fluid filling.

The design of the steam generator

The simplest steam generator is a rectangular case made of metal. The internal situation consists of:

• containers under water;
• pumps (water and steam);
• temperature sensor;
• evaporation chambers;
• nozzle;
• heating element.

On the outside, the steam gun is equipped with a nozzle, with which you can connect water supply. For draining water in the devices, special cranes are removed. Getting to the manufacture of a steam generator with your own hands, it is important to consider that the material for the evaporation chamber must have thermal properties. Additionally, a steam -founder can be equipped with a control panel and even organize the temporary interval of the workflow, which will turn the device into a multifunctional steam system.

Types of steam generators, stove or electric

The steam generator is called the heart of baths, saunas and hamama. Many lovers of paired leisure do not recognize the devices that highlight the steam, but at the same time function independently, that is, without the heat transfer of the furnace. They believe that steam realized by electrical self -education is artificial and less effective when exposed to the human body. However, professionals argue that the electrical devices that are intended for the bath are fully able to satisfy the needs of a person regarding healing using steam procedures.

A steam generator is primarily a device that allows the heat and amount of steam released in the steam room as accurately and productively as possible. As practice shows, ordinary stoves without steam generators with improper guidelines can distinguish too hot or insufficiently humid steam, in turn, the complex operation of these devices completely eliminates this type of problem in the bath.

The process of operation of a wood -burning stove with a steam generator looks as follows:

1. The required amount of liquid is poured into the container under water.

2. Water passes the path to the place of generation of steam.

3. Due to the heating of the furnace, under the influence of the desired temperature (more than 650 degrees), the water evaporates through the specially made holes in the device.

Such vaporization devices do not require additional manual intervention, such as adding water to stones, etc.

At home, they are most often resorted to the manufacture of electric steam generators. To do this, use either used gas cylinders, or pressure cooks and other improvised materials. A more detailed instruction will be indicated further in the article.

What tools and materials are needed for the manufacture of a steam generator with your own hands

For the manufacture of steam generators with your own hands, it is best to use material that makes the effects of high temperatures well. Such an option is just stainless steel. As for the working tool, in the process of manufacturing a steam -form, the master cannot do without:

• hammer;
• roulette;
• drills;
• welding apparatus;
• Bulgarians;
• self -tapping screws;
• scissors for metal;
• Islands;
• divorce and plumbing keys;
• set of drills, etc.

To conduct the initial testing of steam generators, the master will need a thermometer.

How to correctly mount a shower steam vehicle with your own hands

Mini paired, small Turkish baths, phytobochos - these are, in fact, small rooms that function according to one principle, a closed space with regularly distinguished steam. Due to the minimum sizes of the steam room, the presence of stoves in such mini is practically not possible, which contributes to the use of devices such as steam generators that can be made with your own hands even from the plastic canister. For example, for heating a small phytobochka, which is a wooden box with a place for sitting inside, a steam -former with slight power will be enough. For its manufacture in the plumbing store, you need to purchase a metal hose, about 2 meters, a wick-three. Additionally, a metal -plastic pipe, sealants, island, drill, heating element, electric wire and plastic canisters with a litter is 5 -10 liters will be required.

At the bottom of the canisters, a heating element is mounted, which needs to be stacked and fixed with qualitatively. In fact, it turns out a stationary boiler. An electric wire is attached to the heating element, it should be used in the places of contacts to prevent spontaneous shock.

In order to mount a homemade steam vehicle in a mini -steamed, phytobochka, using a drill and suitable drills, holes are made in the lower part of the barrel. They will be needed to bring a metal-plastic hose from a steam-former to a steam room, which is connected to a fitting-tower and directly with a water pipe. For safety and control in mini paired, it is recommended to install thermometers.

The choice of a suitable container, heating element for a steam generator with your own hands

DIY steam generators invention is interesting, requiring ingenuity and some calculations. One of the possible containers that can be used to build a steam -forming device was already mentioned above (plastic canisters). For this purpose, gas cylinders, pressure cooks, etc. are also used. The choice of capacity mainly depends on the dimensions of the paired room, while professionals and masters with practice do not recommend making their own production steam generators with high power.

As for the heating element, the most common are electric heaps that are implemented in stores in various forms, models and power levels. Some craftsmen manage to use heating parts from old electric kettles in homemade vaporization. When installing them, it is worth being careful enough and seal all holes with special heat -resistant gaskets from silicone or genuine leather.

Steam generator from gas cylinder features of manufacture

The factory -made steam -former is, of course, a thing is not available to everyone in finances, but it is necessary in the bathhouse. Therefore, we will consider a decent home -made alternative to the steam device made from the old gas cylinder, which is available in almost every farm.

At the preparatory stage, you should carefully prepare the container: release the remaining gas, drain the gas condensate and wash the balloon, and then let it dry well. To remove the caustic smell during cleaning, you can use a dishwasher, liquid washing powders. After that, it is worth preparing all the tools and additional materials. So, in the process of work you will need:

• welding machine;
• Bulgarian;
• Ten;
• metal tubes;
• nuts;
• temperature and pressure sensors;
• ball crane;
• electric wire;
• Plafers, etc.

Actually, the procedure for assembling the structure and installation can be displayed in step -by -step instructions.

Step 1. The heating is installed in the prepared cylinder. The choice of a heating element should be approached responsibly. It is recommended that the power of the heating plants is equal to the liter, for example, a 10 liter of water should be purchased for 3 kW. The heater mount should be performed with the expectation that over time it will need to be changed, that is, the dismantling of parts will be needed.

Step 2. Next, metal tubes are used with a diameter of 0.5 inches, in the amount of 4 pieces. They need to be placed in the upper part of the cylinder and welded with a welding machine. According to the layout of the device, attach temperature and pressure sensors. It is better to use nuts as a mount.

Step 3. A ball valve is attached to a separate metal tube, then they join the side panel of the cylinder. In this case, the crane is just an indicator of the volume of water in the container, if water begins, it means that the liquid is enough.

Step 4. The brass valve dismantled from the cylinder must be cut into two halves, cut the thread and wind up the ball valve, which will promote steam release. To control the workflow, it is better to use turnout manometers.

This type of steam generators can be installed both in small paired and showers, which allows you to use the steam services at any convenient time. But it is worth considering that good ventilation should be provided in showers for this purpose.

In order to extend the service life of a steam -former of own production, you need to adhere to some preventive rules:

1. Install cleaning filters for water, or pour an already cleaned liquid into the container.

2. At the end of all steam procedures in the bath room, you need to immediately drain the water from the steam generator and do not use it again.

3. From time to time, it is necessary to carry out cleaning procedures for the inside of the steam generator. For this purpose, a solution with citric acid is used, etc., after these actions, the device should be washed well with clean water.

Subject to proper operation, a homemade steam generator will be able to serve its owners no less than the factory. For additional information on the topic: Making a steam generator with your own hands Watch the video: