From such an event as sealing seams in panel houses, in...
From such an event as sealing seams in panel houses, in... |
Every year exponentially, the number of owners of apartments increases, ... |
When arranging a dwelling, it is not the last place to vapor barrier of the walls and ... |
In order to ensure ventilation in the bathroom, the threshold is built. The threshold in the bathroom or in the toilet can improve the comfortable conditions of this room. We will talk about the methods of its manufacture, and about the functional load of the threshold.
In the response to the question, whether the threshold in the bathroom needs, it is definitely impossible to say yes or not. Since it all depends on the individual characteristics of the room in which the bathroom is located. But for those who decided to install the threshold, we propose to consider its main functions in the bathroom.
There are several main reasons why the bathroom requires the construction of the threshold. The first of them is the use of the threshold as an obstacle before water flowing, for example, if a pipe breaks through the bathroom. Thus, all the water will remain in one room, and it will not be necessary to repair several rooms. The threshold also protects another room from randomly spilled water, for example, when bathing children.
In the formation of such thresholds, a wooden beam is used, which is part of the door box. But its use in a room with high humidity is not practical. Therefore, most often in the bathroom they make a threshold from concrete, the same materials are used in its decoration as in the construction of the floor.
Another option for the formation of the threshold in the bathroom is its arrangement using ceramic tiles. In this case, first installed ordinary tiles, and then glue another layer on top, in the form of the threshold. To frame the end plots, the corners are used.
Another reason for installing the threshold in the bathroom is the provision of ventilation. This process is carried out in two ways:
Most thresholds for ordinary rooms are made of material, an identical door, that is, from plastic, metal or wood. Such thresholds make up a single integral design and have an attractive appearance.
But, the use of thresholds made of wood or plastic in the bathroom leads to their rapid wear, since the constant effect of moisture and their washing significantly affect the operational characteristics of such thresholds.
Therefore, if, nevertheless, the installations of a wooden threshold in the bathroom cannot be avoided, it is recommended to use a solid variety of wood for its manufacture, and necessarily treated with antiseptic and moisture resistant impregnations.
There is an option to install a metal threshold in the bathroom, but its presence in this room is completely inappropriate, since the constant effect of moisture will adversely affect its appearance.
The option of building a concrete threshold is possible, which will further acquire the same finish as the entire floor in the bathroom. Such thresholds are the most wear -resistant, do not undergo moisture and look pretty good in the bathroom, as they practically do not differ from the floor.
The size of the threshold depends on the preferences of the owners, the size of the room in which it is built on its functional purpose.
Before building the threshold, you should accurately determine its size. If the room allows, then it is better to build a threshold of such a length that it becomes a full foot on it.
If the repair in the bathroom is already completed, the construction of the threshold should begin with its marking on the floor surface. The place on which the threshold will be located must be cleaned of dirt and debris, if any, and then install the formwork, according to pre -measured sizes.
With the help of a primer, treat the surface, it will provide strong concrete grip. Having set the formwork, follow its evenness. The height of the threshold should not exceed the height of the lower edge of the door so as not to interfere with it unhindered.
Start preparing the solution, be sure, in addition to cement, sand and water, use shrinkage solutions or mixtures that will make the mass more elastic. Make sure that the solution does not turn out to be too liquid.
As soon as the solution is ready, it must be poured into a pre -prepared formwork and leveled. Follow the air temperature in the room, it should not be too high so that cracks do not appear on the threshold. Also, it is recommended to periodically moisten the threshold with water, for its more durable hardening. After completely drying out, proceed to the threshold decoration, it is advisable to use the same tile for this as it is laid on the floor in the bathroom or toilet. Having built a concrete threshold in the bathroom, it will last more than ten years. Such thresholds do not require special care, they are very durable and strong, do not miss moisture and easily wash.
Installing a wooden threshold in a bathroom or toilet is a fairly fast process that does not require greater effort, in comparison with the construction of a concrete threshold. But, nevertheless, you will have to work.
Wooden thresholds in the bathroom - wear out very quickly, so they require frequent restoration or replacement. But, if there is no possibility in the construction of the concrete threshold, then feel free to proceed to the arrangement of a wooden threshold.
In order to make such a threshold, you should choose a tree of powerful varieties, since on the threshold there is constantly a load from walking and closing, opening the door.
Before installing a new wooden threshold, if there is an old threshold, inspect it for defects. With minor damage, it is cheaper and easier to restore it. To do this, the coating must be sanded, and then covered with a layer of varnish and paint, such a color as the door in the bathroom itself.
If the threshold of restoration is not subject and needs to be replaced, then it must be removed with a lever that is gradually clogged under the surface of the threshold. If the wooden threshold rises above the floor, first free it from the fasteners, and then just knock it out with a hammer. The option of sawing the threshold into several parts is possible for safe extraction.
Before installing a new threshold, worry about removing garbage and wipe the surface with a damp cloth. In construction stores or markets, finished thresholds are sold, they are polished, painted and it remains to be simply installed, previously corrected in size.
In the case of self -manufacture of the threshold, it is required to make more efforts to make its surface perfectly smooth and beautiful.
Tip: It is advisable to make the threshold in length slightly larger than necessary, since it is recommended to install it in pre -dried grooves on the sides of the door. Thus, the threshold will be securely fixed and will be better to hold.
The threshold is mounted to the door surface is carried out by nails. To prevent cracking, pre -make holes under the nails, and then fix and put the threshold. Staining and varnished thresholds will complete the process of installing it. If there is a small gap between the threshold and the door or between the threshold and the floor, it is recommended to fill it with a moisture resistant sealant.