Waterproofing Technonikol: the choice of material and application

Protection of any structure from moisture penetration The most important event that ensures the safety and durability of the structure. One of the most successful companies in the production of waterproofing materials is Technonicol Corporation.

Consider the characteristics and features of the use of roll, membrane and coating waterproofing of the techno -nibe.

Content

1. Technognico leader of the European market for the production of waterproofing materials
2. Roll waterproofing and its classification
3. Characteristics and use of polymer membranes
4. Scope of profiled membranes
5. Crystaline waterproofing: mastic and primers

Technognico leader of the European market for the production of waterproofing materials

Technonikol Corporation is rightfully considered the leader in the construction market in the insulating systems segment. The company has been working in this direction for more than 20 years and has its representative offices in 36 countries.

The rapid development of the company became possible subject to high quality standards. Production lines at the enterprise are equipped with computer management systems that control the compliance of the characteristics of the products with the specified parameters. At the same time, at each branch of the corporation, scientific laboratories that control the quality of products operate.

Technonikol materials undergo European certification, and some groups of goods are included in the liability insurance program

Technonikol Corporation specializes in the production of the following groups of goods:

1. Waterproofing materials:
   • roofing roller coatings;
   • profiled and polymer membranes;
   • primers and mastic;
   • foam and sealants.
2. Thermal insulation materials:
   • stone cotton wool;
   • technical isolation and fire protection;
   • heat insulation slabs PIR;
   • extruse polystyrene foam.
3. Materials for the arrangement of the pitched roof:
   • composite and flexible tiles;
   • lining carpets;
   • additional elements (adapters, aero elements, ventilation elements, cornice strips, drainage systems).
4. Polymer compositions (impregnations for hardening, fungicidal impregnation, anti -corrosion protection, elastic waterproofing, protective impregnation for facades).

Let us consider in detail the waterproofing materials of Technonikol and their characteristics.

Roll waterproofing and its classification

Rolled waterproofing of the techno -nitrate is used to protect the sole and lateral parts of the foundation, create a barrier between the supporting walls of the structure and the foundation, as well as the waterproofing of the roof.

The entire range of roll waterproofing is classified into several classes. Products are characterized by a composition, area of \u200b\u200buse, life and cost.

Premium class It has 11 items, among which you can highlight the most popular:

• Technoelast Flame Stop is used to arrange the outer layer of the roof. The composition of the material includes special components of antiprene that prevents the fire. Used on roofs with high fire safety requirements. The upper side of the material has a shale protective coating. The cost of a technoelast flame of the feet is about 150 rubles/m2.
• Technoelast Prime is a bitumen-polymer material related to the roofing glow waterproofing of the techno-nicol. The roll material is glued to mastic. Bezgeny styling allows you to combine the advantages of monolithic mastic and rolled waterproofing. The cost of technoelast prime is about 100 rubles/m2.
• Technoelast thermo multifunctional swimming waterproofing and roofing material of increased strength. Endurance for harsh weather conditions and mechanical strength are provided by a protective coating of the material and an unnecessary base from glass and fiberglass, polyester or fiberglass. Price for 1 m2 80-120 rubles.

Premium materials are characterized by increased reliability and strength. The service life of the waterproofing is 25-30 years

Business Class represented by three types of roll waterproofing:

• UNIFLLEX BREEN DREATING WATER UNSIAL ROOKS. The material provides for special channels that allocate water vapors. Such a device prevents the appearance of bloating on the surface of the roof. UNIFLLEX BECT can be laid on top of the old roofing carpet. The cost of the material is 100 rubles/m2. Uniflex can be used to waterproof the foundation, walls and roofs. The material is suitable for any climatic zone. In the quality of the base, glass chloride or polyester is used, from the outside the uniflex is covered with a polymer film.
• Ecoflex waterproofing underground structures and roofs. The material is recommended for use in regions with an increased temperature regime. Operational properties are preserved even at +130C. Price 1 m2 Ecoflex 80-90 rubles.

Waterproofing related to the class of business has a service life of 15-25 years

Category Standard It has four types of roll waterproofing:

• Bipol material for waterproofing foundations and roofs with a small angle of inclination. The basis (fiberglass or polyester material) is applied a layer of astringent bitumen with subsequent sprinkling of sand or shale. Bipol with coarse -grained sprinkling (type K) acts as the upper layer of the roof, and the bipol with a polymer film (type P) of the lower layer of the roof carpet or vapor barrier. The cost of bipol ranges from 65-90 rubles/m2.

Similar characteristics are possessed by Bicroelast materials, Linker and Linker Rem TKP. The life of the waterproofing of the Standard category is no more than 15 years.

To the goods Economical class The material of the bicrost is the canvas consisting of the base and bitumen binder components. The scope of bikrost is the same as that of the class materials, but its service life is less and does not exceed 10 years. The price for 1 m2 is about 45 rubles.

Category Subeconrepresent materials that are quite common in everyday life and industry, namely:

• Glassesol - has a fiberglass base, which on both sides is covered with a bitumen binder. It is used for waterproofing underground structures, the arrangement and repair of roofs. The price of glass insurance is 40-50 rubles/m2.
• RUBMAST Roof cardboard, saturated with binder bitumen and covered with talc or coarse -grained sprinkling. The maximum heat resistance of the material is 70C, the length of the roll is 10 m, width 1 m. The cost is 1 m2 rubles 45 rubles.

The materials of the category of the suboecon also include roofing and permamine, which are based on roofing cardboard. The average service life of such waterproofing is about 5 years.

Characteristics and use of polymer membranes

Polymer membranes Innovation in waterproofing technologies. A characteristic feature of such materials is a completely new approach to the arrangement of roofing. Members can be used on the roofs of any inclination and any area.

The advantages of polymer membranes technoinol include:

• the durability of waterproofing is the operational period, subject to compliance with the installation technology, can reach 60 years;
• a wide selection of sizes allows you to choose the optimal size of the canvas and avoid cutting;
• resistant to punctures and mechanical damage;
• high fire resistance;
• resistant to UV rays and temperature fluctuations;
• protection of roofs from mold, fungi, germination of plants and decays;
• the vapor permeability of condensate accumulated over the winter evaporates during the warm season;
• high plasticity of the material;
• aesthetic appearance of the coating;
• the possibility of laying on different types of base: reinforced concrete, wooden, from a profiled sheet.

Technonikol produces polymer membranes of the following brands:

• LogicroofA three -layer membrane with an anti -slip surface is suitable for waterproofing roofs in cold regions. The material contains antipyrene and stabilizers that allow waterproofing work at low temperatures. The cost of the coating is 350 rubles/m2.
• Ecoplast The material is released reinforced with polyester mesh, fiberglass and not reinforced. The membrane is used for waterproofing open flat roofs, to create enhancement and binding elements with different roofing structures (masts, funnels, pipes). The air temperature during laying should be not less than -15C, the base temperature of at least -20C. Cost 1 sq.m. Ecoplast-310 rubles.
• Logicpool A membrane for waterproofing and decorative clamping pools. The material is available in four color solutions: blue, turquoise, blue and blue mosaic. The Logicpool membrane is hygienic, elastic, has a wide range of operating temperatures (from -50C to +100C), the waterjacking of the material is close to zero. In addition to the main function, the waterproofing layer hides irregularities and small cracks in the pool bowl. The cost of the membrane is about 700 rubles/m2.

Scope of profiled membranes

Profiled membranes of the techno -nicol of a single -layer or two -layer polyethylene canvas of high density with rounded protrusions 8 mm high.

Profiled membranes are used for:

• protection of the main layer of waterproofing of the foundation from groundwater, roots of trees and plants, mechanical damage during shrinkage and backfill of soil;
• horizontal reservoir drainage structure of the membrane provides protection against pushing;
• ventilation of the raw walls of the membrane attached from the inside of the structure create air circulation, and the outer side and temperature optimize from the outside.

Profmembrans are indispensable in the construction of such objects:

• port structures;
• road surfaces;
• underground crossings and tunnels;
• cellars and basements;
• gas pipelines;
• excavators;
• fertilizer storage structures.

Technonikol produces single-layer membranes (Planter Extra, Planter Standart, Planted Eco) and two-layer (Planted-GEO). A single -layer canvas is used in the sanitation of raw walls and as a protection of the main waterproofing. A two -layer membrane (professional + geotextile) is used in the arrangement of wall drainage.

Crystaline waterproofing: mastic and primers

Capshed waterproofing of the techno -nitrate is represented by a wide range of mastics, primmers, emulsions, varnishes and sealants.

Bitumen mastics are hot and cold. In the first case, the material is previously warmed up to +180C and applied to the surface of the structure. Cold mastics do not require special training, since they include special solvents that give the material the necessary characteristics.

Priners prepare the base before applying the waterproofing layer. Their main functions are increased adhesion of the base with the waterproofing of technology and strengthening the surface of the monolith.

Among the whole variety of coating materials, the following products can be distinguished:

• Bitumen primer emulsion techno -nibble 04 material is completely ready for use. The primer does not contain solvents and can be used in the work of the premises of the brush of concrete, cement-sand and other surfaces before laying waterproofing. The drying time of the primer is about 1 hour, the flow rate is 0.3 l/m2, the waterproofing price of Technonikol No. 04 950 rubles per bucket (20 kg).
• Mastic of Technonikol 24 (Mall) material based on oil bitumen with the addition of a solvent and mineral fillers. Used as external waterproofing of various building structures. Before the work, the concentrate must be diluted with any solvent, for example, solvent or nephras. When applying to a porous base, pre -processing of the surface of the primer is required. Drying time 24 hours, mastic consumption 1 kg/m2, cost 600 rubles per bucket (20 kg).
• The emulsion mastic of the technonic 31 does not contain solvents, it can be used for indoor work (wall processing in the basement, bathroom, balconies, basin walls). The positive properties of the material are achieved 7 days after applying waterproofing layers. Mastic drying time is 5 hours, consumption for waterproofing 3 kg/m2, mastic roof 4.5 kg/m2. The cost of the material is 250 rubles/bucket 3 kg.
• Technonikol 25 varnish (bitumen) to protect the foundation from moisture. After processing, the base acquires a glossy surface that is not subject to moisture. In addition, friction with soil is reduced, which is especially important for striped shallow foundations.
• Branding mastics (techno -nerd No. 22, techno -nibble No. 27) are used for a non -bended method for laying waterproofing. Mastic consumption is about 2 kg/m2 (depending on the type of base and its porosity).

The assortment of waterproofing materials by Technonikol is impressive. Prices for these products are quite affordable, the goods are adjusted to the climatic conditions of Russia, and the quality is not at all inferior to European analogues.